Reviews
Fits: KAWASAKI KDX200R (for competition), KAWASAKI KDX220R (for competition), KAWASAKI KDX250R (for competition), KAWASAKI KL250, KAWASAKI KLX250ES, KAWASAKI KLX250SR, KAWASAKI KLX300R, KAWASAKI KX250, KAWASAKI KX500, YAMAHA WR250Z, YAMAHA YZ250, KAWASAKI KDX200SR, KAWASAKI KDX220SR, KAWASAKI KDX250SR, KAWASAKI KDX200, KAWASAKI SUPER SHERPA, KAWASAKI KLX250R (for competition)
DRCFront sprocket
It was just the right size. This is also adjusted by Rear sprocket. View detail
Fits: KAWASAKI D tracker, KAWASAKI KLX250, KAWASAKI Z250 (2013-), KAWASAKI Z250SL, SUZUKI 250SB, KAWASAKI NINJA2 Helmet50RSL, KAWASAKI NINJA2 Helmet50RR, KAWASAKI NINJA250R, KAWASAKI D-TRACKER-X
DRCFront sprocket
It was just the right size. Now I will adjust it with Rear sprocket. View detail
Fits: HONDA CRF250RALLY, HONDA CRF250L, HONDA CRF250M, HONDA CBR250R, HONDA CB250R, HONDA AX-1, HONDA XR250, HONDA XR250 BAJA, HONDA DEGREE, HONDA XR250Motard, HONDA CB300R
High-speed stopover setting
The normal 14T was also good, but depending on how you drive, it might be a bit jerky from 1st to 3rd gear when driving in town for commuting, etc., and I thought it might be too much of an embbracing effect, so I decided to go with the 15T for higher speeds.
The effect was as I expected, a little more mild and easy to drive in town, and overtaking acceleration on the highway was no problem, making it an EXACTLY good choice for me. I think that 15T in NORMAL would have been fine for me, although everyone has their own experience, riding style, and preferences.
View detail
Fits: SUZUKI GSX250R, SUZUKI V-Strom250, SUZUKI GSR250, SUZUKI GSR250 F, SUZUKI GSR250 S
15T might be optimal.
DL1000 V-STROM250 with Front sprocket 15T is the best for me!
14T5000rpm 65km, after changing to 15T 70km.
Reliable MADE IN SUNSTAR
View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100
530-1010216
Gradual work to improve the performance of the HONDA SUPER CUB 50 CUSTOM engine has led to the need to replace the leading star with more teeth. I did not experiment with manufacturers and looked at the availability of a star with the necessary parameters from KITACO, in their assortment I found the detail I needed. As always, KITACO was not let down, the material and processing quality are at their best!!! View detail
Fits: KAWASAKI KR-1/S/R, KAWASAKI KLR650, KAWASAKI KLR650, KAWASAKI KLR650, KAWASAKI KR-1/S/R, KAWASAKI KLR650, KAWASAKI KLR250, KAWASAKI EN500, KAWASAKI CS250
Might increase fuel economy?
The FSprocket has not been replaced yet and has not been run much, but it feels good.
The Meter reading was previously 4000 rpm at 60 km travel, but after the replacement, it became 3500 rpm and I was able to travel up to 6th gear without any discomfort.
Next time I will replace and adjust RSprocket and see.
View detail
Fits: YAMAHA YZ125, YAMAHA WR125, YAMAHA TY250 Z SCOTISH, YAMAHA DT200 WR
Quickly to run
With the Front12T, you will be running Quickly, both on forest roads and in town.
It is affordable and I feel the effect of the replacement.
View detail
Why is the same number of Ding as OEMs so expensive….
What made you decide to buy?
I have been working on the ZX-6R for 3 years now, and the mileage is about 10,000 km. I thought it was too early to replace them, but since all the parts were available during the spring sale, I decided to replace them.
[How was the installation?
I found information that the Torque of the Engine Sprocket nut fixing the front sprocket was halfway tight, so I loosened the Engine Sprocket nut using an electric Impact wrench from Tirefor Replacement. After that, I tightened the rear brake with the torque wrench at the specified torque of 147Nm, and finally, I bent the washer over the nut using the water pump pliers to prevent it from loosening.
*We are planning to describe this replacement work in our maintenance diary. Please take a look if you like.
How was your experience with it?
At first I was not sure whether to go with 16T or not, but I liked the ride quality of the OEM, so I decided to go with 15T, the same as the OEM. So there was no change between before and after the replacement. The normal specifications list on the product page says 16T, but the 21-year ZX-6R has 15T Front, 43 Rear, 2.866 reduction ratio, and 112 Chain links.
View detail
Fits: KAWASAKI KX100, KAWASAKI KX60, KAWASAKI KX65, KAWASAKI KX80/II, KAWASAKI KX85, YAMAHA PW80, YAMAHA TT-R110E, YAMAHA TT-R50E, YAMAHA TT-R90, YAMAHA DT50, YAMAHA YZ60 81-84
Used for KX112
Used for KX112. The finish and accuracy are sufficient for my needs, and now I can use it on the Enduro. View detail
Fits: HYOSUNG GT 650 COMET R, HYOSUNG GT 650 COMET S, HYOSUNG GT 650 COMET, TRIUMPH TIGER 800 XRX ABS, TRIUMPH TIGER 900 RALLY, TRIUMPH TIGER 800 XRT ABS, TRIUMPH TIGER 800 XCX ABS, TRIUMPH TIGER 800 XR ABS, TRIUMPH TIGER 800 XCA ABS, TRIUMPH TIGER 800 XC ABS, TRIUMPH TIGER 800 ABS, TRIUMPH TIGER 800 XC, TRIUMPH TIGER 800, TRIUMPH STREET TRIPLE 765 RS ABS, TRIUMPH STREET TRIPLE 765 S ABS, TRIUMPH STREET TRIPLE 765 R ABS, TRIUMPH STREET TRIPLE 675 R ABS, TRIUMPH STREET TRIPLE 675 ABS, TRIUMPH STREET TRIPLE 675 R, TRIUMPH STREET TRIPLE 675
Genuine JT Sprockets 14t Front Sprocket for Suzuki SV 650 ABS 2008
This bike came in for a service and a new chain and sprockets fitting. This was purchased along with the rear sprocket just for the job. Have used JT sprockets for many years and know they are brilliant quality and do last a long time compared to some other brands. Easy part to find, I was surprised Webikes stocked them really and quite a few different versions for different models and makes. Price was pretty good. Ordered along with other parts so the shipping was good too. Arrived with no faults or issues. The outer box had been sealed with extra tape to ensure, nothing could fall out or escape during transit. Any empty space was filled with air pockets and bubble wrap so nothing could move too much and damage other more delicate parts in the box. The machining of these sprockets is second to none. The spacing for the bolts is perfect. No problems with anything really. I have not found a sprocket that is of high a quality for the similar price range before. I will stick with JT Sprockets. Have fitted before and know how they go on really easy little job. As I said, great quality parts from a great UK company. Thanks Webike for the great service as always and help with anything I need. View detail
Fits: YAMAHA NIKEN GT, YAMAHA NIKEN, YAMAHA XSR700, YAMAHA MT-10 SP, YAMAHA MT-10, YAMAHA XSR900, YAMAHA YZF-R1M, YAMAHA YZF-R1, YAMAHA MT-09SP, YAMAHA MT-09 TRACER GT, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-07, YAMAHA FZ8S, YAMAHA FAZER8, YAMAHA TDM900
Optimized with Front1Down
[How is it used?
This is an IMPRESSION with 100% Circuit running.
Was the one you received as per Image?
Yes.
This time, we dared to choose 525 without 520Conversion, but even though Steel is the same as OEM, it is MADE IN SUNSTAR. (OEM may be SUNSTAR as well.) is lightweight due to the lack of meat removal and the RubberDamper, which is present on the OEM.
Was the installation difficult?
The shop is in charge of the front replacement, so the process is basically to loosen the axle of the rear wheel, lower the tension of the chain, and then remove and install the front sprocket. The front sprocket nut has a high torque of 140Nm and the OEM is very tight, so it may be difficult to remove the front sprocket without a proper tool.
How was your experience with it?
The OEM YZF-R1/M has a secondary reduction ratio of F16/R41, but even in Circuit, it rarely goes into 6th gear, and most people change it Large. Most people change the ratio to a large one. Unless you want to adapt it to a specific Circuit, it can run in any Circuit to some extent.:As for the Set, I think Front1Down is the best solution, running with the OEM GEAR ratio, In second gear, it's hard to ride at high rpm, and in third gear it's a little heavy." You can drive comfortably in 3rd gear on the Point where you feel like you are in the middle of the road. The appearance does not change at all, but expensive Parts (Exhaust System, Suspension, etc.) I think it is more expensive and outstanding than replacing the
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
A new pure STD Nut is required for replacement. I also replaced the Washer, which is in the form of a plate, at the same time.
・90208-22002 Washer、ConicalSpring ¥616 (Tax included/as of April 2024)
・90179-22018 Nut ¥660 (Tax included/as of April 2024)
The two points are
View detail
Fits: YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200, YAMAHA TW125
feel well
Used for Restore on TW200
It is a little more expensive than other manufacturers, but I trust them.
The one that came with it so far was terrible.
In case of TW200, it is necessary to remove the Left cover to replace the FrontSprocket.
I'll have to buy Packing at the same time.
View detail
Fits: YAMAHA WR250X, YAMAHA YZ125, YAMAHA YZ250F, YAMAHA YZ125X, YAMAHA YZ250FX, YAMAHA WR250F, YAMAHA WR250R
Driven Sprocket Replacement
Replaced OEM 13T with 14T.
Traveling roads and city driving has become much easier!
Buy a spare Lock washer.
View detail
Fits: SUZUKI VOLTY, SUZUKI ST250, SUZUKI ST250 Etype, SUZUKI GrassTracker, SUZUKI GrassTracker BIGBOY
Front sprocket replacement
Changed Front from 14T to 16T and Rear Sprocket from 48T to 46T.
I thought it would be sluggish at the start because the GEAR ratio was quite low, but I don't mind that much.
It is easy to handle for long touring and city driving.
View detail
Fits: HUSQVARNA 701 ENDURO, HUSQVARNA 701 ENDURO LR, HUSQVARNA 701 SUPERMOTO, HUSQVARNA SVARTPILEN 701, HUSQVARNA VITPILEN 701, KTM 350 EXC, KTM 350 EXC M/O, KTM 350 EXC SIX DAYS, KTM 350 EXC SUPER-COMP 20KW, KTM 400 DUKE, KTM 400 LC4 ENDURO, KTM 400 LC4 ENDURO R, KTM 400 SUPER-COMP, KTM 450 RALLY FACTORY EDITION, KTM 600 LC4, KTM 600 MX, KTM 620 DUKE, KTM 620 EGS, KTM 620 EGS-E, KTM 620 EGS-E ADVENTURE
FSprocket exchange 15T → 14T
The start acceleration, which was a little sluggish in NORMAL, is now smooth and smooth.
And in return, the sky looks better with the highest speed Down&Wide opening! (Lol)
Naturally, acceleration has improved, but I am satisfied with Large because I have fewer situations where I have to worry about selecting GEAR on congested commuting roads.
I heard that people who go to forest roads still use Short, but … this is good enough for now.
View detail
Fits: SUZUKI RG500 γ, SUZUKI SV1000, SUZUKI GS400, SUZUKI GS1200SS, KAWASAKI Z400FX, SUZUKI DESPERADO800, SUZUKI BANDIT650, KAWASAKI ZZR400, SUZUKI RF600R, SUZUKI INAZUMA1200, SUZUKI GSX-R750, YAMAHA YZF600R ThunderCat, SUZUKI BANDIT1250S, SUZUKI GSF1200, SUZUKI BANDIT1200, SUZUKI BANDIT600, SUZUKI GSX-R1000, SUZUKI GSX-R600, SUZUKI GSX750 INAZUMA, SUZUKI GSX750S KATANA
It works without any problems.
Replaced at the same time as Chain.
After the replacement, I do not notice any change, but it seems to be working fine.
View detail
Fits: HONDA HORNET, HONDA JADE, HONDA VTR250, HONDA VTR250F, HONDA V-TWIN MAGNA250, HONDA VTZ250, HONDA XELVIS
For CB250F
About quality and texture Excellent product About the feeling of use smooth running.quality is good. About shipping and packaging good packaging and fast shipping View detail
Fits: SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI GSX-S125, SUZUKI Gixxer 150.
Bore up and then the effect Outclassing.
I wanted to get closer and closer to SUPER CUB 90 (laughs).
Driven Sprocket was changed to 14→15.
[Sprocket's role].
Sprocket‥
What is Sprocket? Sprocket." The gear-like parts in the center of the wheel of a tire that transmit the engine's power to the tire.
Driven Sprocket‥
It is one of the essential parts to transmit the rotation of the engine to the saw chain.
The word drive (drive) is, Driving." Although it is widely known to mean, "Driven." does not translate as 。 In fact, the Drive has a Drives the ~." means.
■Change the number of Driven Sprocket hits.
High Speed Oriented
Lower Fat → Focus on acceleration
*I would say that raising the number to 14 →15 guns this time is the most High Speed Oriented.
■ Replacement procedure (for CUB)
(1) Remove the chain cover.
Remove the Side Cover and Chain Cover.
The side cover can be removed with a large-trimmed slotted screwdriver.
↓
Remove the chain cover, and note that there are four 10mm bolts and one bolt next to the rear shock has a different bolt length.
↓
? Remove Bolt of Chain Cover with Glasses Wrenchetc.
↓
(4) The upper part of the Chain Cover is removed by pulling it up at a right angle.
↓
(5) Next, remove the lower part of the Chain Cover as well.
↓
(6) Set the Chain play to the Most Large.
To use an analogy, it is a dull state.
When only the front sprocket is used, the chain does not need to be removed and is Large sturdy.
↓
(7) Replace the Driven Sprocket.
First, remove the Change Pedal.
*The fixed Bolt is located at the base of the mounting shaft.
↓
Remove the Bolt for fixing the Pedal with a 10mm Wrench (?).
↓
Next, remove the Crank Case Cover. There are three fixed bolts.
↓
Remove the fixed Bolt of the Crank Case Cover with a ? 8mm socket wrench.
↓
When the 11 (11) Cover is removed, the Driven Sprocket appears.
↓
Remove the Bolt with a ?10mm Wrench and remove the fixed Plate of the Sprocket.
↓
Install the ? new Driven Sprocket aligning it with the groove. Insert the Fixing Plate in line with the groove in the middle of the mounting shaft, and turn it slightly to align it with the Screw hole.
↓
?After that, tighten the Bolt firmly and install the Sprocket.
☆ Effect ☆ ☆ ☆ ☆ ☆ ☆ ☆ ☆ ☆ ☆ Effect
◎Maximum speed has increased, from 80 to 85 and beyond.
◎The second speed is easier to use.
Changed from 2nd gear → hill only to 2nd gear → medium speed cruising.
Work Precautions
When touching Sprocket, bare hands are dis→ed.
● The work process is tedious because there are many work processes.
Since it is related to power, I think there is little demerit in replacing it.
Even if the power is increased by bore-up, it is a waste of power if the power is not transferred to the drivetrain parts.
The reverse idea is that if the low-speed Torque is too weak, we can lower the number of hits.
View detail
Fits: SUZUKI Bandit 1250S ABS (BANDIT), SUZUKI Bandit 1250S ABS (BANDIT), SUZUKI GSX1400, SUZUKI Bandit 1250F ABS (BANDIT), SUZUKI GSX1400, SUZUKI Bandit 1250F ABS (BANDIT), SUZUKI Bandit 1250F ABS (BANDIT), SUZUKI Bandit 1250S ABS, SUZUKI Bandit 1250 ABS (BANDIT), SUZUKI Bandit 1250 ABS (BANDIT)
OEM compatible Sprocket
BANDIT1250 F total mileage 85750km,Recently, I was concerned because the Chain was making a clattering noise.
Since I am a novice mechanic, I enjoyed replacing bearings and tires by trial and error, but when I inspected the front sprocket, I realized it was time to replace it. So I went to Webig and searched for parts and found OEM products and interchangeable parts. After considering how long I would be driving the car, I decided to go with the interchangeable parts.
To replace it, we had to have more Socket on hand, but we replaced it successfully and immediately ran a TEST run.
As I thought, the noise of the Chain disappeared and it became quiet and smooth. I will be able to go out for touring this Season with peace of mind.
View detail
Fits: HONDA HORNET, HONDA JADE, HONDA VTR250, HONDA VTR250F, HONDA V-TWIN MAGNA250, HONDA VTZ250, HONDA XELVIS
Great
About quality and texture Good Product. light weight. About the feeling of use good for the smooth run. About shipping and packaging Fast Shipping. package is well no way to damage View detail