Reviews
Used for MC19 CBR250R
Same standard as OEM, so no problems with installation or performance. View detail
For DIYCustom.
This is an unusual Size and will be useful for DIYCustomers. View detail
Fits: YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA TMAX500, YAMAHA TMAX530, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03
Response revival of new cars
Installed on a YZF-R25 (8BK-RG74J).
It was installed without any problem, although there is no mention of a 22 or later MODEL in the compatible car models.
I didn't see any thin fuel reaction, and the amount of inhalation doesn't seem to have increased as described.
I feel like I'm getting a firm suck.
In OEM, if you use a lot of emblems and run for a long time, the oil in the blowback will give you a sluggish feeling.
With this less bellows high flow type, it is not so much of a concern.
I haven't driven the car that much since I replaced it, but so far the Response is the same as it was when it was new.
It seems like it's been going on forever. (It could just be my imagination.)
I think it's hard to see the effect for people who drive Main on flat streets.
I would recommend it to anyone who, like me, commutes daily on country roads with steep grades.
View detail
![Brake Pads [Stock Type]](https://img.webike-cdn.net/catalogue/images/29487/E441_01_TS.jpg)
Fits: KAWASAKI Z1100R, KAWASAKI Z250FT, KAWASAKI Z750LTD, KAWASAKI Z750FXII/III, KAWASAKI Z1100GP, KAWASAKI Z1000R, KAWASAKI Z1000P (POLICE), KAWASAKI Z1000 (air-cooled), KAWASAKI Z750FX, KAWASAKI Z750 (air-cooled), KAWASAKI Z400LTD, KAWASAKI Z550, KAWASAKI Z400GP, KAWASAKI Z400LTD, KAWASAKI Z400FX/Z400J, KAWASAKI Z250LTD, KAWASAKI Z750FXII/III
just a minute
I am a little concerned about the weight of the car. View detail
good price product
I purchased it as a replacement for the genuine Benley 110. It's cheap, but you can't feel any difference from the genuine product.
I am very satisfied and intend to purchase again in the future.
I think it is advantageous to purchase multiple items. Thank you for selling a good product at a low price. -------------------------------------------------- -------- I purchased it as a replacement for the genuine Benley 110. It's cheap, but you can't feel any difference from the genuine product. I am very satisfied and intend to purchase again in the future. I think it is advantageous to purchase multiple items. Thank you for selling a good product at a low price. Powered by Google Translator
View detail
Fits: SUZUKI CARNA, SUZUKI Shot, SUZUKI high-R, SUZUKI Address50, SUZUKI AddressWAY, SUZUKI High, SUZUKI LETS II-L, SUZUKI AddressEX, SUZUKI LETS II-S, SUZUKI LETS II, SUZUKI LETS II-Combination brakes, SUZUKI LETS-DX, SUZUKI LETS-L, SUZUKI LETS II, SUZUKI LETS II, SUZUKI LETS-G, SUZUKI ZZ(ZZ), SUZUKI LETS, SUZUKI VERDE, SUZUKI LETS4 Palette
Some older Suzuki scooters that are included in the list of compatible models may not be able to be used.
I have a SEA BASS ScooterLOVE and ordered this as a replacement part because the rear brake shoe is worn out.
However, when I lined up the delivered item with the removed shoe, it was clearly unusable because it was almost 1.5 times larger than the original.
This is not an evaluation of the performance of the Brake Shoe itself, but it is a review for all users of this type of older Scooter.
View detail
Fits: HONDA MONKEY, HONDA SUPER CUB 50, HONDA LITTLE CUB, HONDA NSR50, HONDA NSR80, HONDA NS-1, HONDA NS50F, HONDA MBX50, HONDA CRM50, HONDA CRM80, HONDA MONKEY, HONDA GORILLA, HONDA Monkey Baja, HONDA MONKEY R, HONDA MONKEY RT, HONDA DAX50, HONDA DAX70, HONDA JAZZ, HONDA MAGNA50, HONDA CHALY 50
Did not fit.
The conformity information is incorrect. I was disappointed because I purchased it on faith. View detail
Cheap.
I was worried until it arrived because it was cheap, but it was a decent thing. (Excuse me....)
Lever Cover is on and Bellows is on.
There seems to be no particular problem.
The other thing is durability, but as expected, I can't give an imprementation (laugh).
View detail
Fits: SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI Address V125G, SUZUKI Address V125G, SUZUKI Address V125G, SUZUKI Address V125G, SUZUKI Address V125G, SUZUKI Address V125G, SUZUKI Address V125 Limited, SUZUKI Address V125 Limited, SUZUKI Address V125 Limited, SUZUKI Address V125 Limited, SUZUKI Address V125S
Size is Exactly but
I ordered this to replace an Air cleanerFilter that was falling apart due to hydrolysis without my knowledge.
I wasn't sure how much filter oil (sold separately) to apply, so I applied the oil as I usually do on off-road motorcycles, but it seemed to be too much, and air cleaner oil spit out from the silencer for a while.
There is no way to go wrong with the installation.
View detail
Fits: SUZUKI Address V125G, SUZUKI Address V125G, SUZUKI address V125, SUZUKI address V125, SUZUKI Address V125S
Cost-effective OEM alternative
When I bought a vehicle with about 50,000kn and maintained it, the powder that was Air cleaner was scattered in the box, and I bought it in a hurry.
I didn't care about Performance in a commuter car, so I bought this one which is superior in cosmetics.
Sponge Filter is a bit oily and should be touched with gloves.
The shape is also Exactly on V125S.
I don't know the effect since it is a regular replacement part, but both idling and blow off are smooth and I didn't feel any special effect on power.
It seems to have a long life if it is inspected occasionally and dust is blown off with air blow and oil is given.
View detail
Fits: YAMAHA BWS (Bewith), YAMAHA BWS100 (Bewith), SYM RX100, YAMAHA Majesty 125, YAMAHA Grand Axis, YAMAHA BWS100 (Bewith), SYM RX100, YAMAHA Majesty 125, YAMAHA Grand Axis
Appropriate price and appropriate performance!
I bought it at a very cheap price There is not much difference from the original before break-in, but after break-in, it shows better braking power than the original. Diagonal scratches make it easy to dissipate heat and dust, providing consistent performance. View detail
![HexStainless bolt [M8]](https://img.webike-cdn.net/catalogue/14190/08100054_53e6441b8fe92_TS.jpg)
Stainless bolt
Exhaust System fixing parts are rust-resistant Material:Changed to Stainless Steel.
This makes it rust-resistant and looks good.
View detail
Fits: HONDA BENLY50110 PRO, HONDA BENLY50110 , HONDA 4ST GYRO CANOPY, HONDA 4-stroke GYROX, HONDA BENLY50, HONDA BENLY50 PRO, HONDA BENLY50, HONDA BENLY50110, HONDA BENLY50, HONDA GYRO CANOPY, HONDA LEAD125, HONDA LEAD125, HONDA LEAD125, HONDA SPACY125, HONDA CBR125M, HONDA CBF125, HONDA Sh-Mode (ANC125), HONDA Taranis 110GP, HONDA Scoopy(CREA SCOOPY)110i, HONDA CT110
having great efficacy
[How is it used?
Installed on a PCX125 JF56 with 30,000 km on the odometer, I replaced the Brake Shoe when I refreshed various parts.
It was not reduced enough to replace it at a glance, but I replaced it, so it is safe for the time being.
How was your experience with it?
Since I did not prevent the squeal, there is a dragging cue sound every time I do the Rear brake, but I think it can't be helped for the time being.
I thought there would be no difference between the OEM and the Rear brake, but I'm glad I made the change.
I also don't know how durable it is, so I gave it 3 stars.
It looks cool, and although it is a part that you can't see, it was nice to have the feeling that it was replaced.
How did it compare to other products?
I've only used OEM, so I don't know that much, but as mentioned, the efficacy has definitely improved.
[Points to note]
You should squeal!
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
Fits: HONDA PCX125, HONDA SHMODE, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA AIR LADE125, HONDA Click125I
Air filter replacement
The product was full of dust and considering the application, I will still go with OEM Parts next time. View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA BWS125(BWS), YAMAHA BWS125(BWS), YAMAHA BWS125(BWS), YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X
Used for SE461
[How is it used?
The MOS Crankcase Filter I had been using was very dirty and Timing was good and I was able to get a good price at Webike's OutletSale, so I decided to replace it. Thank you very much. The price range is just right for when you are one step closer to free shipping.
Was the one you received as per Image?
It is the same Gold Genus Mesh that we have been using.
The color is now gold and a little more shimmering.
Usually, it fits within the Case, so it is no different, but when it is bare, it may be a bit Fashion.
Was the installation difficult?
The pure Normal Thread Screw that is installed is a Plus screw, so it will be Large sturdy if you are careful not to lick it.
It is good to install the stopper by aligning the large hole in the middle with the small hole that serves as the stopper, so that it will not gap.
How was your experience with it?
Since it is not Sponge like OEM, it does not deteriorate and become tattered, and I prefer Gold Genus Type.
Since this is a part that gets a lot of heat, I thought that the Gold genus would be better in terms of durability.
The air duct was sucking in Sponge, but the filter is preventing foreign matter from getting into the Crankcase. The fine mesh is good.
[Included Parts:were they on?
Not particularly
The Package was double packed and carefully packaged.
View detail
I replace it every 20,000 km.
Reached 20,000 km since the last replacement. I bought this one again after the last time because it is the lowest price among the Net purchases according to my own research. I bought this one again, but this time the area of the filter was a little smaller than the previous one, which may be due to cost reduction. The installation was smooth and the precision of the others was good. View detail
Prepare just in case
We prepared just in case this was the first time we had to replace a Tire. View detail
KN Planning Fuel Hose
I am satisfied that this Size can be used by OEMs without any problems
The 6MM is a little too large for me, so this is the best size for me.
View detail
Fits: YAMAHA gear, YAMAHA box, YAMAHA Box, YAMAHA NEWS GEAR, YAMAHA GEAR
Purchased for Yamaha VOX50 maintenance
I bought it to replace all consumable parts including filter and Oiletc. because I got it from an acquaintance. I was able to purchase all the parts at once, so the motor runs smoothly and smoothly. View detail
Fits: SUZUKI Address V125G, SUZUKI Address V125G, SUZUKI address V125, SUZUKI address V125, SUZUKI Address V125S
under the influence of price
I bought it because the price was low.
It is a consumable item, so I am very grateful that you sell it at such a reasonable price.
View detail