Reviews
Fits: HONDA CBX400F, HONDA CB400SF, HONDA CBR400F, HONDA CB400FOUR, HONDA CBX400F, HONDA CB400SF, HONDA CBR400F, HONDA CB400FOUR
Made by POSH for safety!
I always used KITACO but this was cheaper so I bought it.
Compared to KITACO, it is the same as KITACO Large and seems to work fine.
View detail
Heat and scratch protection
The evaluation did not seem to be bad, so I bought it to try it out.
Since it seems to have high heat resistance, it is used to prevent heat deformation and scratches on the inside of cowls. The price is not that much, and there are a few meters, so it can be used to some extent. I would like to check the adhesiveness for a while.
View detail
Black
The Black bracket and Silver Fixing Screw stand out, so I bought it to unify them with Black.
Stainless Steel's Black, I couldn't find a place near me that had it, so it was a great help.
View detail
Stainless Steel Fixation
Fixing Screw to be rust resistantMaterial:Replacement with Stainless Steel.
It helps that I can choose the Size I want.
View detail
Number theft prevention
A regular Hexagon Bolt would be fine.
Replaced with Torque, which may help a little with theft prevention anyway.
View detail
You don't have to have it, but it's still better to have it.
I have always wondered about this contact, but it is indispensable for Plug connections. In the past, it was attached to Plug as a matter of course, but recently it is not attached, and when I wanted to use it, I had to purchase it because I did not have it on hand. View detail
Stainless black
I purchased the Grip end Fixing Screw in Black to unify the two.
It is Stainless Steel, Black, and the length was not available at my local shop.
View detail
Finger-friendly
The grom is Black and I wanted to add color.
Lever grip so it was a simple Accent.
I was just worried that the tip of the lever might shred when I installed it, but I was able to install it successfully.
It was Point to apply a generous amount of detergent when installing.
View detail
Stainless screw
Exhaust SystemFixing Screw is changed to rust-resistant Stainless Steel fixing.
It looks nice and clean now.
Size, length and was not sold nearby, so it was a great help.
View detail
Power Filter Replacement
Installed on Z125PRO
The DAYTONA Power Filter had various problems, so we installed a new Duct and installed this one!
I am satisfied that there is no more noise to worry about.
View detail
Stainless Steel
We used rust-resistant screws to fix the parts, and since we wanted to eliminate the protruding parts, we used these buttons and stainless steel screws to fix the parts.
It looks good and was a nice fix.
View detail
to fix
Stainless SteelButton is used to fix Rear Sets.
It was tightened several times and replaced with a new one before the hexagonal part was licked during removal and could no longer be removed.
Quantity:1 Set of 2pcs. It was a little cheaper so it helped.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA BENRY CD50, HONDA monkey, HONDA Super Cub 50, HONDA dachshund, HONDA jazz, HONDA magna fifty, HONDA Monkey BAJA, HONDA Monkey R, HONDA Monkey RT, HONDA jazz, HONDA magna fifty, HONDA Monkey BAJA, HONDA Monkey R, HONDA Monkey RT
Since it was cheap, it purchased in passing at the time of bore up. Sealing also becomes brave.
Since it was cheap, it purchased in passing at the time of bore up.
Sealing also becomes brave.
View detail
Convenient, but...
I use it on the hose of the fuel tank of my CBR250 MC17. it is convenient to remove the hose with one-touch while lifting the tank during maintenance. The only drawback is that it is too expensive. View detail
Feels like it depends on where you use it.
I didn't use it because the hexagonal part was shallow and I almost blistered it. View detail
Mm-hmm.
It is not suitable for the place where Torque is applied. View detail
It's good to have some comfort.
[How is it used?
It was just installed the other day. Practical durability performance will be verified in the future.
Was the one you received as per Image?
It is close to Image, but the thickness is thinner than I imagined w
How was your experience with it?
After I changed to Earls Gear's Full Exhaust System, I was worried about heat distortion of Lower cowl because Exhaust pipe, RightLower cowl and Clearance became narrower. I found this insulation tape on Webike, so I tried it. I found this insulated tape on Webike and gave it a try.
Easy to apply and perfect adhesive strength. Because it is not thick, the tracking of the curved surface seems to be good.
But what about the important insulation performance? This is my feeling.
[Points to note]
Since it cannot be reapplied, the surface to be applied must be thoroughly cleaned and degreased.
How did it compare to other products?
I haven't compared them because Webike didn't give me any other choice. However, the OEM insulating seat material on the lower cowl of Kawasaki ZX-14R is quite thick, so the insulating effect may be a little less than that.
Other items that would be helpful
It is better to prepare the cleaning tools such as Silicon-off and Parts cleaner.
It would have been nice to be able to choose the thickness of the Heat Insulating Material as a product Variation.
View detail
Plug conversion Adapig
The range of Plug choices is expanding, so the Large variation is very helpful! View detail
70?
Surprisingly, LineUp is useful when you need this longer Size.
The Bolt itself is an ordinary Stainless Steel Bolt. It seems to be strong and can be used with confidence.
View detail
You can find the Size you want!
CFPosh is the place to find the Size you want that is not in the Home center. I like the exquisite lineup of the size that can reach an itchy spot! View detail