Reviews
DAXAir cleaner
Good cosmetics,
Mounting Bracket Location OEM and
Spacers are not required because of the difference.
View detail
Fits: HONDA MONKEY
3-pole coupler connector
Quality and texture information is no different from the std product It is compatible with Honda Std products for its usability You should have a wire stripper to buy together It's easy to install Buy based on cost performance and comparative brand preference with other products WeBike packaging is always great, arriving in a week for delivery and packaging Concerns, precautions, or advice on purchase If you connect the cable incorrectly, it is difficult to reunite There should be no failure from the beginning View detail
Power Supply Branch
I wanted a 110 2-pole terminal for charging and connection.:I wondered if it was a good idea since it is a Set, but substitutions with other inexpensive items would have sufficed. View detail
Terminals Waterproof and for insulation
Used for the crimping part of the Brake terminal.
Mainly for waterproofing purposes. To be honest, I thought two Shrinks would be enough, but I was attracted to the fact that there are various types of Covers and that they come with a Case. I will keep it for a while because I can use it in case of emergency.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Gasoline Hose
About quality and texture be well-organized Hose and clip About the feeling of use Takegawa High Flow Fuel Cock does not fit well with standard products, but the hose did not feel durable Products to buy together hose clip Difficulty of installation easy , simple Cost performance and comparison with other products It feels similar compared to other hoses. It's not much different, but it's cost-effective About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing I tried to change the hose line because the oil tank was old and foreign substances came out, but the internal diameter of the SPTAKEGAWA High Flow Fuel Cock did not fit, so I will leave it as a spare and use it to replace the vaporizer hose View detail
I wonder if it could be a little cheaper, I'm looking for 8cm re-release.
Used for Clutch Cable of THRUXTON900
A little short. Is the 8cm one discontinued?
I cut and add the for Motorcycle's and use them.
It's expensive, isn't it? How about half price?
View detail
U-shaped hook
I know it's a series of pitches, but I installed the RIDEA RIDEA Stand Hook yesterday and used it with a U-shaped hook.
It's more obvious than Swing ArmType, but it's totally stable.
However, it interferes with the bolt for hook fixation when the shaft is removed.
I removed the Bolt at that time because it won't come off once it's fixed in STAND.
U-shaped hooks can be used normally, so this is more PointUp than the last one.
But I still think it's too hard for a car with a lot of weight.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY
To the DAX.
I bought it because I had accumulated a lot of points.
I don't run at night, so it was fine to leave it off separately.
But isn't it expensive? With one bulb.
View detail
Fits: HONDA DAX, HONDA GORILLA, HONDA MONKEY
Cheap Gasket
MINIMOTO MinimotoExhaust System Gasket for MONKEY, DAX caught my eye, so I bought it on impulse this time
I think the quality of the product is reasonable for the price range
It's safe to say that you won't be disappointed by the amount of gold you buy, which is Large
It's not that bad of an impression I've had of it
I don't know if I'll continue to use it in the future, but I'm glad I bought it
View detail
Fits: HONDA DAX, HONDA CHALY 50, HONDA MONKEY
Required for maintenance.
MINIMOTO MinimotoHorizontal Engine Maintenance The Stand Multi Type has arrived and I'd like to give you a quick in-play of how it feels to use it.
I think the quality of the product is reasonable for the price range
It's safe to say that you won't be disappointed by the amount of gold you buy, which is Large
If you are considering purchasing a similar product with a similar
I don't think it's a good product to buy.
View detail
It's not a problem
MINIMOTOMinimotoThe MinimotoPiston ring compressor has arrived, so I'm going to give it to you I'd like to give you a quick in-play of how it feels to use it
I think the quality of the product is reasonable for the price range
It's safe to say that you won't be disappointed by the amount of gold you buy, which is Large
I bought the product and I don't feel like I'm losing money
As far as shopping goes, I felt like it wasn't a loss
It is a product worth the Gold amount
View detail
You need to use it a little more carefully
Before using the tool, carefully observe the crimp and the tool and see if it is still usable You will need As others have imposed, without worrying about Chain's Crimp shape etc Crimp height and diameter should be adjusted to match the height and diameter of the crimp part Compare with Dice and check the surface where CrimpPunch touches Crimp part Make sure that the Crimp Tool is in contact with the Center of the Crimp and tighten in 0.5 rotation The Chain Tool requires more force but is easier to work with Please go while you are there It takes a little more care than expensive tools, but it is possible to do it without breaking anything After the work is done, check the caulking area carefully for cracks or cracks If you are only trying to save money, please contact a reputable motorcycle dealer to do the work Your life is at stake
View detail
Instead of an OEM Product!
I got the DAX from a friend of mine, and this is a big 88cc with a Bore up It was a cab air funnelSpec It was cool enough as it was... but I still like the OEM look decided to replace the carburetor with a PC20 and replace it with this air filter!
The airfuel itself is fine, as is the detail in other people's Impressions It's just fine! It's cheap! LOL!
Once you put it on, you don't have to worry about the details! expected to be
I thought it would be easy to put the Air Filter for DAX on the DAX! is PC20.... It wasn't so easy to get the carburetor side of PC20 size I added KITACO's Joint funnel to adjust the size of it and then I was able to get a better fit The Air FilterBody managed to install with a bracket
It came on like that, but it's pretty fluffy lol
But it looks like it, so let's call it good! Because it's cheap lol
The performance itself How is it? As far as the performance of the Filter is concerned? There are a lot of parts of it that are...cheap, lol
It needs some work to install, and I don't think it's number one in terms of performance, but It's okay.. It's okay! It's cheap!
I can't recommend it to complete beginners, but I'm sure you'll find a way to make it work If you like things to be attached, you should try it
View detail
It's cost effective compared to OEMs
The OEM product is too expensive to buy, so we can't afford this Universal Buy Product
The surface paint and details are crude, but it's cheap, so it makes sense
View detail
I think this quality is good for the price!
I think the quality is good for the price
But it seems to be too much for a car with a large chassis
Just right for MT-03
Brake, Chain, Sprocket, etc
I think it's necessary for those who make maintenance better
I'm not using the Front
It looks fine
View detail
Quantity : Purchase Set items
To finesse Wiring, 0. Since it is common to use Size less than 3sq, Shrinkable Tube also wanted Small Size. I thought about buying only 2 mm Tube, but since it is imprecisely Quantity with abundant Size with Case : I bought a set item
Performance is the same as other Tube. , The shrinkage factor is about 50%. It was easy to use because it was short cut shortly from the beginning
Shrinkable Tube is a necessity if you finger Wiring, Quantity with abundant Size : It is convenient because you will not buy it after you purchase a set item
View detail
Can you use it? - - -
As Front stand, I used it with GSX-R1000.
Especially it can be used without problems.
I do not have much opportunity to use it so I do not have a problem, but if it is used a lot, it might be better to buy a thing with a slightly higher price range.
(Product information)
The price is cheap, "MADE IN CHINA" There is also thing called, overall is not good to make.
At the time of opening from the stage Ball box, the paint was rubbed or the handle parts of Screw (resin) There was a problem such as being broken. As Screw will not be usable, Stainless's Bolt (M8) We exchanged for.
Also, because the processing accuracy is poor, it is also difficult to assemble. We recommend that you paint Grease and assemble it where the Gold genuses touch each other.
View detail
Fits: HONDA MONKEY
Tail lamp for installation
I did not sell it near the Tail lamp installation, and I sold the two pole, quadrupole Coupler ... Three poles was saved because I could install the Tail lamp safely. View detail
In cospa
Oil It was used during replacement. Oil Since it is about one exchange every 3 times it is not expensive, but it was cheap so I bought it all together. I'm satisfied because I can save the trouble of using the water-resistance paper to familiarize the surface and use it again. View detail
Fits: HONDA MONKEY
Purchased for GORILLA's EngineWiring Coupler broken
I could have connected it one by one with a round Bullet Terminal, but I bought this Coupler from the appearance and ease of maintenance
Wiring diagram etc on connection. You do not have to look at it, and when putting the Engine on another Frame, it is handy as well as an OEM because it is one Coupler
View detail