Reviews
Feeling of security
I always had a hard time hanging the Maintenance Stand on the Swing Arm, but by fixing the front tire to the ClampSTAND, the stability is increased and the Maintenance Stand can be used with ease. View detail
As a replacement for OEMBlinker relay
I bought a battered 900SS (900SL) and am Restore.
In this situation, RearBlinker decided to change to ultra-small type LED's for various reasons.
The front is a Cowl recessed type, but since this is part of the body design, it is used as is, and the light bulbs inside are not converted to LEDs, but are left as they are.
This would be a hassle with bulbs in the Front and LEDs in the Rear, but times have evolved and there is now ICRelay, which supports a variety of wattages and makes everything look good.
The problem is replacing that ICRelay with the original Relay.
For ordinary Japanese cars, it is a 2-pole universal layout, so all you have to do is plug in the Conversion Connector that comes with the Relay, but unfortunately, DUCATI is a 3-pole Relay.
In addition, the connector is fixed to the body of the car, and the Relay is inserted into it, which is the opposite arrangement from that of domestic cars.
(For domestic cars, the RelayBody is mounted on the car body, and the Connector extending from the Harness is inserted into it.)
So we decided to disconnect and discard the UniversalConnector (Female side) from Relay and make our own Conversion Connector that would be Male-Male.
After carefully checking the terminal shape of the OEMRelay, I realized that it is the same as the H4Headlight Connector.
So I bought this Kit to create H4Connector.
Although there are a variety of female connectors that can be used with H4 Valve, there are only a few that can be used to create male connectors that reproduce the shape of the Valve.:Set is appreciated!
Unfortunately, the H4 and OEMRelay terminals had different widths, although the connector shape was correct.
The OEMRelay terminal width is about 6.4mm, and this H4 terminal is about 7.7mm wide, about 1.3mm thicker, so Quantity:Pair (for Left and Right) was shaved and prepared 0.6mm at a time.
However, the terminals are generated by folding a flat plate 180° with PRESS, so if both ends of the terminal are shaved, the folded part is lost and becomes RoseRose.
To avoid RoseRose, before shaving both ends, solder is poured inside the terminal to fix the PRESSED board firmly in place, and then both ends are shaved...Relay terminal is completed!
The completed terminal has a different width at the insertion point, but the rest of the terminal remains the normal H4 terminal shape, so it can be used by inserting it into an H4Socket as usual.
Just check the terminal positions of ICRelay and OEMRelay (they were in a position relationship that would not function if you stuck them in as they were) and assemble them.
We were able to connect the Relay receiving Connector on the car body side and the replaced ICRelay Connector while converting well.
The terminals included in the Connector set are gold-plated and magnificent, and their shape and strength are quite normal and perfect.
Male of H4Connector. It should be a rare occurrence, but if you are having trouble with HID or LED wiring, this is the perfect solution.
View detail
ExactlyFit！！
YAZAWA [ YAZAWA SANGYO ] Gasoline portable can Mini Tank 2.5L [ Part No. ] MT3 I purchased this product because the aluminum cap of my "X" was deteriorating! Aluminum caps tend to deteriorate easily, so I am glad that there are repair parts! View detail
Purchased OilDrain tank4L Satisfied
I was looking for the smallest type of OilDrain tank. 4L is the smallest and cheapest, so I bought it immediately. 4L is just right for my GROM which has 900 liters of oil, so it will be useful for oil and fluid replacement.
The only disappointment is that when the Cap is opened, the Oil drain bolt just about fits through the hole.
But after careful consideration, I cut out the cap of the plastic bottle and inserted it with a hole in the middle so that it would not drop in.
I'm satisfied
View detail
Perfect for 2nd Silencer.
Used for storage of RM125
It was Exactly to the Silencer exit Size of the 2nd vehicle.
I recommend it because of its low price.
View detail
I think it's cheap
Personally, I thought it was inexpensive.
It feels good to use, polishes properly, and is convenient to have.
I would buy it again.
View detail
Lidded to prevent Garbage from getting in.
[How is it used?
Used to refuel a fuel tank from a carry can at Circuit.
Was the one you received as per Image?
Yes.
How was your experience with it?
The lid prevents Garbage from entering the container even if it is left outdoors.
The lid is important to keep Garbage out of the Fuel Line.
[Points to note]
None
How did it compare to other products?
I bought it because of its 5L capacity and large size, and because it is a reliable brand.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Convenient for both ChainMaintenance and Wheel cleaning
These are the useful items that impressed us the most after we started to ride motorcycles. Especially for those of us who started our motorcycle life with Belt-driven motorcycles such as Buell and Harley, Chain maintenance has been a great hassle since we started to ride Chain-driven motorcycles.
I was very impressed when I found this maintenance stand, and it made it very easy to clean the wheels and check for nails and other foreign objects after driving. Moreover, even with a Harley Ultra weighing nearly 400 kg, it was not particularly difficult to put it on the stand, and it is a supreme product that is very easy to put on and take off.
View detail
Easy to dispose of Oil.
[How is it used?
To dispose of Oil after replacement in a waste oil can.
Was the one you received as per Image?
Yes.
How was your experience with it?
I haven't used it yet, but unlike the cheap oil pans I've been using from Asphalt Products, I've been able to use the same oil pan.
I like that the spout is attached around the middle.
This will allow pouring without spilling even if it is filled to the brim.
[Points to note]
None
How did it compare to other products?
It has a handle and I thought it was well thought out for the situation in which it would be used.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
I wanted something like this!
[How is it used?
I was looking for something like Towel with high water absorbency. This was the perfect product to wipe off water immediately after washing the car.
Was the one you received as per Image?
Just like the Image! It has the texture of a Towel that you soak in water and wrap around your neck in the summer. It absorbs water as soon as you wipe it up and dries quickly. It is very good because it becomes a little heavier after blowing water and can be used again as soon as it is wrung out.
How was your experience with it?
I am glad I tried it. I feel it is essential for car washes because you can squeeze it out and use it over and over again.
[Points to note]
The moment I bought it and opened the package, it had a distinctive smell.
How did it compare to other products?
I don't know because I have not purchased any other products.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Front Wheel Stand
Until now, I have been doing maintenance in the garage using only the jTrip Rear Stand, but now I can easily raise the Rear Stand with one hand after fixing it with the Front Wheel Stand.
It is very convenient and quite stable in the upright position.
Someday in Transporter …
I have all kinds of fantasies, such as.
It takes some force to push and pull, but once you get used to it, I don't see what the problem is.
I should have bought it from the beginning.
View detail
It is quite convenient to have it.
I used to use a waste oil poi to change Oil at home.
I may be poor, but after using the waste oil poi, I also reused it with Vinyl and cotton, leaving only the corrugated Ball.
However, the waste oil poi was too high and the mouth of the Vinyl was not fixed properly with the mouth open, so I often spilled Oil once every few times.
Of course, waste oil poi is used to dispose of waste oil, but this eliminates the possibility of spilling oil unless it is very serious.
Also, if I drop the Drain Washer or something, I can find it quickly, so that alone is pretty good.
As you can probably tell from the shape of this product, it is characterized by the fact that the discharged Oil can be discharged like a funnel.
This feature is the value of this product, and if you don't need this feature, other products will suffice.
View detail
Convenient
It helps immensely when washing the car.
I'm glad I bought it
View detail
RWS！ (RollingWorkSeat！)
This chair makes it easier to work in a middle or tight position during maintenance.
Size is 270mm×170mm for the seat surface, as mentioned in the product information. Body450mm×190mm
The body is made of strong plastic and has wheels, making it easy to move while seated and reducing the burden on the back when working.
If only I had a lower chair, it would be easier to work with. The RWS is perfect for Motorcycle maintenance, which is a task that requires a lot of work!
It is inexpensive, and considering that it gets dirty with oil, etc., I think GunGun is a good choice. The storage compartment on the seat can be used to store tools, oil and grease, so you can start working on a small task right away. It may reduce the amount of work that is postponed.
There were some shavings left in the opening of the chair when it was new, so I did not give it a perfect score for quality and texture, but it is not a chair for the type who cares about such things. I would recommend this product to those who value practical use.
View detail
Easy to use
It's not something I use often.
Used for Fork oil weighing, etc.
The product itself is good and does not fall over while in use.
Convenient to use.
The small size makes it easy to wash after use.
View detail
Items that you can't let go of for back pain sufferers.
This WorkSeat has become a must-have items for back pain sufferers. It is the perfect height for working on the footrests. View detail
Very useful for Scooter!
[How is it used?
I bought this for my CYGNUS X SR Model 5 Oilfor Replacement, and the CYGNUS has an exquisite Center Stand in the way.
I bought this product because there is a drain bolt and the Center Stand is too low to fit a large-geometry oil pan.
Was the one you received as per Image?
It's a great product, but I'm not sure if it's the right size for me.
I thought it would be no problem if I could cover the cost. The size is just right for implementation and is easy to use.
How was your experience with it?
It is simple and easy to use. I also use it to change the oil in the circuit of my YZF-R25, which has been converted to a racer.
The only problem is that the sink is still flat, so there is a high possibility of spilling on the Large when you throw it away.
So I'm thinking of either cutting it or intentionally hitting the exhaust pipe to melt it and make it easier to flow.
[Points to note]
As others have mentioned, be careful when you pass the Center Stand through the neck, if it doesn't go in at an angle!
It's fine when you put it in, but after you pull the oil out, you have to angle it to get it out! Then it's a large disaster (laughs).
If the amount you pull out is small, you can go without spilling, but if it's a lot, you will definitely spill.
How did it compare to other products?
I think the square oil pan has a merit that it can be stacked.
If you are using a scooter, the Center Stand will be in the way.
That makes me wonder if it's any other shape than this one!
View detail
Very useful for all my vehicles
When researching the vast variety of oil drain pans available on line at Webike I decided on the style with a spout for easy of pouring the old oil into container for disposal and one with the capacity to not only handle the oil quanity from my motorcycle but also my car. I have used this product serveral times now and can say it is a pleaseure to use and an easy clean up with no mess at the end of the vehicle servicing. The product material is very strong and durable with no signs of weakness. The handles and the spout cap were features I did not consider I needed but make life a lot easier when caring a full pan of oil around the garage. Great designed and manufactured oil drain pan from ProTools. View detail
Just the right size to organize your Wiring.
[How is it used?
I used it to put together Wiring to add DriveRecorder-etc.
I only had the White Tie Band on hand, so I chose this size which was in stock in inconspicuous Black.
Was the one you received as per Image?
To be honest, even if the size is written, I do not know the Image of the size feeling, I chose appropriately, but it was just right. lol.
I thought it would come with a Rubber Band like in the product photo. I thought so, but it was in the bag properly.
How was your experience with it?
It's a normal Tie Band, and it's a good size to organize your wiring.
I'm hoping the fact that it's a weatherproof Type means it'll hold up!
Also, not only this product, but the Tie Band bag is good because if you open it from the side as shown in the picture, it won't come out of the bag.
【Review】
It has a good size and is useful for organizing wirings or anything else.
As it comes in a pack of 100, well, if you are a normal person, I think buying this will be enough.
The Tie Band can be bought even in the 100-yen etc., but it is safe to choose the solid thing which is weatherproof if the price difference is about Juice1 pc anyway.
View detail
I'll stick it in for now.
Shift link when buying "Free shipping. I bought it to make
The Motorcycle storage area is a place that gets wet during heavy rain. "I wish I had. That's what I thought. 。 When I'm not riding, I stick it in anyway. It's not raining, but rainwater doesn't seem to get in, so I think it's good. Also, what a waste of texture (laughs)! Also, the actual handle was a Red color.
View detail