Reviews
Recommendation for those who are anxious to draw a Maintenance Stand alone!
Although an instruction manual is included, it does not explain the details of how to assemble the unit, which was confusing at first. I would have liked to have a guide to the screw holes to be used for the approximate number of inch tiers.
There was a product video on how to use and assemble the product, so I checked it out and assembled it. The video was very helpful.
The NINJA1000's front tire (120/70Zr17) was firmly secured and stood on its own. It also felt stable when lowering the bike.
I used to do maintenance only with the Rear STAND, but when I lifted up the bike by myself, I didn't hang it properly and it fell over. I wish I had bought it before I stumbled...I would like to recommend this product especially to those who work alone to avoid damaging a large motorcycle.
View detail
Feeling of security
I always had a hard time hanging the Maintenance Stand on the Swing Arm, but by fixing the front tire to the ClampSTAND, the stability is increased and the Maintenance Stand can be used with ease. View detail
As a replacement for OEMBlinker relay
I bought a battered 900SS (900SL) and am Restore.
In this situation, RearBlinker decided to change to ultra-small type LED's for various reasons.
The front is a Cowl recessed type, but since this is part of the body design, it is used as is, and the light bulbs inside are not converted to LEDs, but are left as they are.
This would be a hassle with bulbs in the Front and LEDs in the Rear, but times have evolved and there is now ICRelay, which supports a variety of wattages and makes everything look good.
The problem is replacing that ICRelay with the original Relay.
For ordinary Japanese cars, it is a 2-pole universal layout, so all you have to do is plug in the Conversion Connector that comes with the Relay, but unfortunately, DUCATI is a 3-pole Relay.
In addition, the connector is fixed to the body of the car, and the Relay is inserted into it, which is the opposite arrangement from that of domestic cars.
(For domestic cars, the RelayBody is mounted on the car body, and the Connector extending from the Harness is inserted into it.)
So we decided to disconnect and discard the UniversalConnector (Female side) from Relay and make our own Conversion Connector that would be Male-Male.
After carefully checking the terminal shape of the OEMRelay, I realized that it is the same as the H4Headlight Connector.
So I bought this Kit to create H4Connector.
Although there are a variety of female connectors that can be used with H4 Valve, there are only a few that can be used to create male connectors that reproduce the shape of the Valve.:Set is appreciated!
Unfortunately, the H4 and OEMRelay terminals had different widths, although the connector shape was correct.
The OEMRelay terminal width is about 6.4mm, and this H4 terminal is about 7.7mm wide, about 1.3mm thicker, so Quantity:Pair (for Left and Right) was shaved and prepared 0.6mm at a time.
However, the terminals are generated by folding a flat plate 180° with PRESS, so if both ends of the terminal are shaved, the folded part is lost and becomes RoseRose.
To avoid RoseRose, before shaving both ends, solder is poured inside the terminal to fix the PRESSED board firmly in place, and then both ends are shaved...Relay terminal is completed!
The completed terminal has a different width at the insertion point, but the rest of the terminal remains the normal H4 terminal shape, so it can be used by inserting it into an H4Socket as usual.
Just check the terminal positions of ICRelay and OEMRelay (they were in a position relationship that would not function if you stuck them in as they were) and assemble them.
We were able to connect the Relay receiving Connector on the car body side and the replaced ICRelay Connector while converting well.
The terminals included in the Connector set are gold-plated and magnificent, and their shape and strength are quite normal and perfect.
Male of H4Connector. It should be a rare occurrence, but if you are having trouble with HID or LED wiring, this is the perfect solution.
View detail
Convenient to have. Used during car wash
[Usage]
I use it when I wash my Motorcycle to prevent water from getting in through the Exhaust System. I used to use Dustcloth as a substitute, but this product is easier to use. Conversely, it is a product that can be used as a substitute, so I feel the price is a little high.
[Feeling of use]
Just plug it into the Exhaust System outlet before washing the car.
Since the part to be inserted is rubber, there is no risk of scratching the exhaust system when it is inserted.
(Points to note)
The Rubber on the insert is hard, so you need to push a little harder when inserting it.
Sealability seems to be there. It is not a product that is completely waterproofSeal.
View detail
ExactlyFit!!
YAZAWA [ YAZAWA SANGYO ] Gasoline portable can Mini Tank 2.5L [ Part No. ] MT3 I purchased this product because the aluminum cap of my "X" was deteriorating! Aluminum caps tend to deteriorate easily, so I am glad that there are repair parts! View detail
Rear stand hanging is easy
I found the product by chance, searched for it on Webic and bought it. It is super easy to hang Rear stand especially in Garage. I wish I had bought it from the beginning. I highly recommend it. View detail
Oil change
Used when injecting gear oil.
The Bellows one that comes with the Oil is fine, but this one seems better for Oil injection because it can be shrunk with Silicon and the angle is easier to work with.
It is not used that often, but it is an expensive product, so if you have 1 pc. you can use it for various purposes.
View detail
Purchased OilDrain tank4L Satisfied
I was looking for the smallest type of OilDrain tank. 4L is the smallest and cheapest, so I bought it immediately. 4L is just right for my GROM which has 900 liters of oil, so it will be useful for oil and fluid replacement.
The only disappointment is that when the Cap is opened, the Oil drain bolt just about fits through the hole.
But after careful consideration, I cut out the cap of the plastic bottle and inserted it with a hole in the middle so that it would not drop in.
I'm satisfied
View detail
Perfect for 2nd Silencer.
Used for storage of RM125
It was Exactly to the Silencer exit Size of the 2nd vehicle.
I recommend it because of its low price.
View detail
Just right for disposable
[How is it used?
Used to clean parts during Restore of TZr50R.
I bought it because the price was low and the tips of the hairs I had before were becoming stiff.
How was your experience with it?
It was easy to hold and use.
The small size also makes it easy to clean the smallest of areas.
However, it may not be suitable for cleaning Large objects.
How did it compare to other products?
Although the quality is much lower than the slightly more expensive Brush, it was great for a simple cleaning of the Sunday mechanic. Especially when it comes to Restore, these supplies are cheaper and larger in quantity than in quality.
[Points to note]
There are three types of bristle tips, but use them with caution, as they may damage parts if used incorrectly.
View detail
Connection
It is used for redoing Wiring.
Just Right Quantity:It was just the right number of pieces to reASSY in a set.
View detail
Convenient
Usable as normal. I bought it for measuring Fork oil. I think it is good to have several of them. View detail
For cleaning.
I bought it because it seems useful for cleaning carburetor and for cleaning tight places.
Quantity:1 Set of 5pcs. so it can be used in different places, which seems convenient.
View detail
If it were a little cheaper, there would be a reason to choose it.
[How is it used?
Purchased for storage and maintenance of Dual PurPass vehicles.
I already have a Lift Stand made by DRC, but I bought an additional one because I use it for storage of another vehicle in my garage. I'd like to compare it with the DRC one.
Was the one you received as per Image?
I don't know which Manufacturer was the first to market this type of product, but I think DRC is the MAJOR MANUFACTURER in the STAND of LiftType with Damper? I think so.
PROTOOLS' Lift Stand is a "DRC+AstroPRO Ducts÷2" The product is functional and just like the Image, although there are some parts where the system is a bit....
Was the installation difficult?
The body and lever part, which is lifted by the principle of leverage, arrive in the box in a pre-installed state, so after opening the box, the body is assembled with two Bolts & Nuts.:Pair (for Left and Right) Bolt did not go into Smooth due to a subtle Gap in the
I used a round bar File to slightly enlarge the hole, but I think this is an individual difference, so I don't think all products have gapped holes.
How was your experience with it?
The vehicle is almost vertical and stable after lift up with less rattling at the props than with DRC products.
Since it has only been a short time since we purchased it, we have not experienced any Damper gas loss, and there is no functional inferiority compared to DRC products, and we hope that the performance will be maintained for as long as possible.
The rubber mats on the ceiling, which are grounded to the vehicle, are fixed to the top panel with thicker Rivet, but in terms of visual quality, they are inferior to those made by DRC.
[Was there anything that disappointed you?
I don't think it is a disappointment, but the paint on the lever part of the leverage is easily peeled off, so it might be better to handle it carefully, apply protective tape, or repaint it, as the base is exposed when it is raised and lowered roughly.
Other items that would be helpful
Point and hang of installation
If each moving part is thoroughly greased up before use, wear and force on moving parts can be reduced, so it is a good practice.
Quantities like the one I purchased:Pair (for Left and Right) Even if there is a gap in the screw hole of a screw, it is easy to rework it, so do not panic and check each part after temporary assembly.
[Availability and clarity of the Instruction Manual
It contains only a very simple installation instruction manual like a memo, but I think it is an easy-to-understand product for its intended use.
[Notes]
When lifting up, use the carBoth Sides of the car where the ground surface is as flat as possible.
Lifting up on an uneven surface can cause the vehicle to become unstable and fall over, damaging or injuring the motorcycle.
Also, be sure to lock the lock lever after lifting up.
Please make sure to check the lock to avoid the risk of accidentally touching the lever of the leverage part and causing the motorcycle to come down.
[ITEMS TO BUY TOGETHER
If you do not have Grease as a maintenance tool, purchase cheap Grease and apply it to the moving parts during assembly.
[Opinions and requests to Manufacturer
To be honest, there is not much price difference between this product and the one made by DRC. "Sell" If you pay a little more Gold, a real (?) DRC will replace it. If you pay a little more Gold, you can replace your DRC with a real (?) DRC.
I would not say half the price, but a price about 4,000 yen lower than that of the DRC product would be attractive enough.
View detail
I think it's cheap
Personally, I thought it was inexpensive.
It feels good to use, polishes properly, and is convenient to have.
I would buy it again.
View detail
For cleaning
Quantity:1 Set of 3pcs. and the price is low, so you can use it without worrying.
The Plastic section is also easy to hold and has a nice elasticity.
It is cosmetically good, so it is enough if you can hold it at some level.
View detail
Lidded to prevent Garbage from getting in.
[How is it used?
Used to refuel a fuel tank from a carry can at Circuit.
Was the one you received as per Image?
Yes.
How was your experience with it?
The lid prevents Garbage from entering the container even if it is left outdoors.
The lid is important to keep Garbage out of the Fuel Line.
[Points to note]
None
How did it compare to other products?
I bought it because of its 5L capacity and large size, and because it is a reliable brand.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Convenient for both ChainMaintenance and Wheel cleaning
These are the useful items that impressed us the most after we started to ride motorcycles. Especially for those of us who started our motorcycle life with Belt-driven motorcycles such as Buell and Harley, Chain maintenance has been a great hassle since we started to ride Chain-driven motorcycles.
I was very impressed when I found this maintenance stand, and it made it very easy to clean the wheels and check for nails and other foreign objects after driving. Moreover, even with a Harley Ultra weighing nearly 400 kg, it was not particularly difficult to put it on the stand, and it is a supreme product that is very easy to put on and take off.
View detail
Easy to dispose of Oil.
[How is it used?
To dispose of Oil after replacement in a waste oil can.
Was the one you received as per Image?
Yes.
How was your experience with it?
I haven't used it yet, but unlike the cheap oil pans I've been using from Asphalt Products, I've been able to use the same oil pan.
I like that the spout is attached around the middle.
This will allow pouring without spilling even if it is filled to the brim.
[Points to note]
None
How did it compare to other products?
It has a handle and I thought it was well thought out for the situation in which it would be used.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
I wanted something like this!
[How is it used?
I was looking for something like Towel with high water absorbency. This was the perfect product to wipe off water immediately after washing the car.
Was the one you received as per Image?
Just like the Image! It has the texture of a Towel that you soak in water and wrap around your neck in the summer. It absorbs water as soon as you wipe it up and dries quickly. It is very good because it becomes a little heavier after blowing water and can be used again as soon as it is wrung out.
How was your experience with it?
I am glad I tried it. I feel it is essential for car washes because you can squeeze it out and use it over and over again.
[Points to note]
The moment I bought it and opened the package, it had a distinctive smell.
How did it compare to other products?
I don't know because I have not purchased any other products.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail