Reviews
Convenient
I've been working on the ground, squatting, sitting or kneeling,
My buttocks would get cold when I squatted, and it hurt when I kneeled, so I covered it up with an old Towel or something like that.
I just happened to find this Matte on our site and gave it a try,
If you fold it up, you can sit on it, if you lay it down, your knees won't hurt, and it's a friendly place to keep the tools you use,
It's a good thing, isn't it? (Laughs)
View detail
Comfortable Goods for progress in maintenance!
Maintenance is performed at the Apartment's bicycle parking lot.
I used to lay out a bath towel, but in the winter, the cold of the ground came up from my buttocks and was quite painful.
When I use this Matte, I don't feel cold. And with the cushioning, it doesn't hurt when I put it on my knee or something.
When folded up, you can sit on it as a little chair, which is a good height for cleaning the Chain or something.
It's lightweight and compact with the use of a belt to hold it in place, so I have no complaints about it.
View detail
Cushioning Outclassing for easier maintenance
I happened to see this product mentioned in an article when I wanted to do something about kneeling or sitting straight on the floor when servicing the lower part of the vehicle body, such as the Engine underbody and undercarriage at Garage.
I bought it because I liked the way the matte was thick and yet compact when folded.
When I used it, it was as easy to use as I expected, and I could kneel and lie down, as well as sit on the folded part to do maintenance work in a really comfortable position.
The cushioning of the thick matte is also comfortable, so much so that I wonder if this could be used as a matte for overnight stays in the car. I think it could be used as a matte for overnight stay in a car.
Considering all the groundwork I have had to do, I wish I had used this product earlier.
View detail
Easy to use
It is effective in removing Seals such as Caliper.
The tip is not angled, so it is convenient to remove without scratching anything other than the Seal.
View detail
Easy to use
Convenient for removal of drainage molding.
The drainage molding needs to be removed and attached when painting, so it can be removed efficiently.
The grips are easy to hold, and the tips are easy to hook so they can be removed successfully.
View detail
Easy to use
I used it to remove the panel around the Dashboard and it is very convenient without scratching.
The easy-to-hold shape makes it easy to apply force, making work easier.
The Remover itself is solidly built, so even a rigid panel will not bend.
View detail
Convenient
The Tailgate is slightly open and can be tilted, which is very convenient for checking the condition of the painted surface and turning the Polisher. It is very convenient for checking the painted surface and turning the polisher. View detail
The Wrench that comes with it is excellent!
I bought this to fill my brake fluid for a DIY brake hose change, and it comes with everything I need to change brake fluid. I bought it to fill the brake fluid. The large wrench is convenient for loosening and tightening the Breeder. The hose of the syringe was a little thick for Harley's Breeder, so I added a thin hose separately and used it. View detail
To remove the Tank Cover of MT-07
[How is it used?
It is mainly used for car maintenance, and for motorcycle, it is very useful to remove the tank cover of MT-07.
How was your experience with it?
This slim Type is just right for removing Tank Cover of MT-07.
How did it compare to other products?
Unlike the cheap ones, they don't break.
According to the official site, it is a resin with Fiber, or maybe Glass fiber.
There is a sense of security when working.
In return, the Gold amount is higher.
View detail
I feel the threshold is not beginner friendly w Is it a tool for PRO?
[How is it used?
Currently in use, rarely used since it only comes into play when Chain is exchanged.
Was the one you received as per Image?
Image is correct. It has a sense of quality and rigidity.
How was your experience with it?
The Grip is easy to hold, the movement of the Outer and InnerBolt is smooth, there is no stress, and the accuracy is high.
Various Product Contents are made into attachments in order to be used for Chain size correspondence, Cut, and Crimp, and it is easy to use the point that the O-ring is attached to the attachment and the dropout prevention measure is given. Moreover, it is devised in the shape that can be checked so that it may not be tightened too much in the press fitting of the joint plate.
When crimping the Link Plate, there is no need to prepare any other tools by using the attached Handlebar, and I like the fact that it suppresses the input of an overly large Torque. This is an excellent tool that has a lot of ingenuity and can cut and crimp reliably.
There are some disappointing points such as the price, the surface coating peels off on the powder and sticks to your hand when you use it for the first time, the instruction manual does not specify the amount of crimp, and only the illustration of the crimp shape and notes are written.
[Points to note]
If you are not sure how much to crimp, we recommend you to check the specified value of ChainManufacturer.
The instruction manual instructed to use 52 press-fit plates for 525 size, but I used 50 press-fit plates (530 size) because I could not use them with DID 525ZVM-X which I replaced this time.
How did it compare to other products?
We compared the DID Chain tool, which has a low price and a good reputation, but we chose a reliable and first-class tool manufacturer because of its ease of use and the fact that the chain is an important security component.
Other items that would be helpful
Opinions and requests to Manufacturer:I would like to see the Crimp amount (diameter) for each Chain size listed in the Instruction Manual or on the web.
View detail
Not only tools, but also removed Bolts and Screws are easy to place.
This one from Silicon is really easy to use. There is no extra slippage, so it's easy to keep small parts and bolts that you remove. View detail
It is useful for panel polishing.
It can be used on almost any vehicle and is very useful for polishing the tailgate, as it allows the tailgate to be opened at an angle, making it easy to check the condition of the paint and to turn the polisher. View detail
It is convenient for removing the panel.
It is very effective for removing panels around DoorLining and Dashboard. It's easy to hold and grip, and the solid construction of the Remover will not cause any damage to the hard panels when removing them. The other side can be used to remove the Grip. View detail
It is easy to remove and hard to damage.
Convenient for removing the drainage molding. When painting, the drainage braid must be removed or replaced as the BALI will come out. The Grip is easy to handle and the tip is easy to hang on, so you can remove the drainage braid without damaging it. View detail
Improving work efficiency
This is a must-have tool for overhauling the Brake Caliper and it is effective for removing the Seal of the Caliper. View detail
Versatile for removing seals
I bought the Brake Caliper Seal to pry out of it, but it didn't work for that purpose.
This is because the blade is surprisingly thick and does not catch Seal easily.
However, it can be used for other purposes, such as removing the O-ring, and it is definitely a reliable tool to have.
View detail
It has excellent Cushion properties.
It can be used as a kneeling board when working in a low position or as a sleeping board when crawling underneath. It can be folded up into a Compact for easy transportation. It is very useful if you have one in your workshop. View detail
You can use it in many ways.
Foldable CushionMatte can be used as a sleeping board if it is unfolded, or it can be folded to become a chair. It's very useful for kneeling or low maintenance and doesn't take up much space. View detail
Perfect for garage maintenance.
Motorcycle maintenance is often done in a low position, so I have to kneel down. With this product, I don't have to worry about dirt on my clothes. You can put power into your knees even if you are in an unreasonable posture. View detail
Very handy to have.
If you don't know, you'll think it's a slotted screwdriver with a worn out tip.
The price of this will surprise you if you don't know what it is.
But it's so good.
It can be used without damaging the seal or its surroundings.
It feels so good, like a lie.
Reliability from an overwhelming sense of security.
It's true.
View detail