Reviews
Feeling flow instability as per other impressions.
I use it because I often Overflow on my old car.
I'm not particularly particular about the Manufacturer, but DAYTONA seems to be well worth the price. There are no visible defects, such as paper wrinkling.
However, as mentioned in other impressions, the flow rate seems to be lower than other companies' products, and sometimes the Gasoline would run out at full throttle on the freeway scene, etc. (Waiting a bit will fix it.) Also, the Gasoline would suddenly stop running due to air bite, although the cause was unknown (I'm not sure if this was due to the Direct product, but removing the filter would fix it). (I don't know if this was due to the Direct product, but it was fixed by removing the filter.)
Therefore, it is not very useful for 250ccSports type motorbike.
I will look for a product with a higher flow rate.
View detail
Fits: KAWASAKI ZZR1400, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-14R, KAWASAKI ZX-14R, KAWASAKI Z1000, KAWASAKI 1400GTR, KAWASAKI ZX-6R, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZX-6R, KAWASAKI ZX-14R, KAWASAKI 1400GTR, KAWASAKI 1400GTR, KAWASAKI Z1000, KAWASAKI ZX-14R, KAWASAKI ZX-14R
Pad replacement
Normal. Good cosmetics. Large inventory. View detail
Too big, mostly for Wheel
[How is it used?
For undercarriage wash of Motorcycle
Was the one you received as per Image?
It is so much bigger than I imagined. It looks like the size of a car wheel brush. It has a Size feeling like a Brush for a wheel of a car.
How was your experience with it?
It is indeed flexible, but I think it is too big and not suitable for washing motorcycles. If it were half the size, it would be easier to wash the area around the rear shock and around the engine through the cowling, but I don't want to accidentally damage the paint with it.
It would be good for something like NAKED with an air-cooled engine.
[Points to note]
The bristles are too hard to wash painted surfaces, so it is mostly used around the feet and engine area.
[Opinions and requests to Manufacturer
Put it out half as fine as it already is.
View detail
Fits: KAWASAKI Z250, KAWASAKI Ninja250, YAMAHA TZR50R, YAMAHA TZR50, YAMAHA TZM50R, YAMAHA TZ50, TRIUMPH TIGER1050, SUZUKI BURGMAN400, SUZUKI BURGMAN400, SUZUKI BURGMAN200, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman SS, SUZUKI DR800S, KAWASAKI ELIMINATOR 125, KAWASAKI Z400, KAWASAKI Z400, KAWASAKI Z250SL
Used for VERSYS-X
No complaints about the price if it holds up.
4,000 kilometers and I'm down to less than half of that.
Cost will be high because it decreases quickly.
View detail
I have checked the fit.
Strainer packing was too large to fit.
I had no choice but to reuse it, but there is no particular oil leakage.
I've checked the fit ….
View detail
Fits: SUZUKI Bandid 400 Limited V, SUZUKI Bandid 400VZ, SUZUKI Bandid 400 Limited, SUZUKI Bandit 400, SUZUKI Bandid 400V, SUZUKI Bandit 250VZ, SUZUKI Bandit 250 Limited, SUZUKI Bandit 250, SUZUKI Bandit 250, SUZUKI Bandit 1200, SUZUKI Bandit 250 V, SUZUKI Bandit 1200 S, SUZUKI Goose 250, SUZUKI Goose 350, SUZUKI Inazuma 400, SUZUKI Impulse 400, SUZUKI Impulse 400, SUZUKI Impulse 400, SUZUKI Impulse 400 Type S, SUZUKI TL1000S
Cheaper than OEM, but less effective
OEMPad has gone up in price considerably, so I bought this one.
I feel it doesn't work as well as OEM (need to step harder).
View detail
Not suitable for Side number vehicles.
It is a very effective maintenance tool for vehicles without a center stand. However, if the vehicle is a side number spec. vehicle and has a SIDESaddle Bag, the handlebar will hit the SIDESaddle Bag, so you will need to remove the Saddle Bag. It is better to use a HARLEYPantograph jack such as AstroPROducts for side number cars. View detail
It's available but ・・・・・
There was no description of the dimensions in the product description of the Webig; there is no description on DAYTONA's website either, and the dimensions can finally be found by opening the handling instructions.
Our car is a custom vehicle. The diameter of the hole where the grip fits is 36mm. The hole diameter is 36mm, and the width of the brake lever is 20mm.
If I had known before I purchased the product, I would have gone to ・・・・・.
The lever hooking part was also machined.
Prospective buyers should check their own car's BuRipSize.
View detail
Although convenient….
It is troublesome to remove the Caliper when removing the Wheel and protect it from scratches, and this product seemed convenient and had a good reputation, so I purchased it.
I think it is convenient that it can be easily stored, protected, and hooked up inside the Porch, but I don't think it will be used that often.
The fabric is thin and feels cheap. I would like to see more cushioning. I felt that the selling price is too high for the material.
View detail
It's hard for me, I'm clumsy.
Purchased to use only Male on the Led License Lamp side. Female on the body side was not necessary.
However, Male's terminal Quantity:Crimp failed on 1 pc of the 2 pc, so no more Quantities other than the one I bought at WeBig.:I had to drive 1 Set to a supply store to purchase it.
The remainder is 4 Female terminals, Male1 pc, Female side CouplerQuantity:2pc. Set, TAB coupler1pc. and will be sent to Garbage bin.
It would be helpful if you could sell the terminals only.
Or it would be helpful to add one Plus terminal each for failure.
For a clumsy person like me (laughs)
But this is expensive.
View detail
For installation of oil cooler
Used for Z125PRO
The air cleaner box must be removed when installing Mukawa's oil cooler, so it is converted to a power filter.
So I bought it because it was the only shape that would fit inside Space.
I'm more concerned about the chirping sound of the Gold genus and the puckering sound of the Rubber when the Axel is turned off, rather than the unique sound of Powerful.
It was too much for me to care about, so I am removing it now.
View detail
insufficient flow
The product is solidly built, but the amount of flow to the carburetor is less than that of KIJIMA's products of the same et cetera, and it is easy to cause gas deficiency. I am concerned about it and it is Stress. So I changed to another Filter. I am sorry to hear that. View detail
Used when changing Oil
I bought this to receive the Oil flow when changing Oil.
The feel is what you'd expect, but...
A piece of Corrugated cardboard or a gum Tape would be sufficient.
I couldn't deny the feeling.
If you use it, you'll want to clean it up with PartsCleaner, and when you do...
What a cosmetologist.
It's a goof. I'm sorry.
Things are good.
View detail
Too much water absorbency.
I thought the absorbency would improve after a few washes, but not at all.
Other Micro fur bar towels smoke well, but this one doesn't absorb at all.
It's a shame because it's cheap and the large size is just right.
View detail
Fits: SUZUKI V-STROM1000, SUZUKI V-STROM1000 XT, KAWASAKI ZX-10R, KAWASAKI Ninja1000, SUZUKI V-STROM1050, SUZUKI V-STROM1050 XT, SUZUKI V-STROM1000, SUZUKI V-STROM1000 X, SUZUKI GSX-R750, SUZUKI GSX1300R HAYABUSA, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI Z900RS, KAWASAKI Z1000, KAWASAKI Z900RS CAFE
Is it cosmetically sound?
I used to wear a Golden Pad.
This time, I went with HYPERSintered because of my budget, but
It is less effective than the Golden Pad.
I think it's worth the price…
Next time, I think I'll go with the Golden Pad.
View detail
not so bad
[How is it used?
We have used it 3 times to wash the Spoke wheel.
Was the one you received as per Image?
The Flexible part of Flexible does not bend without more effort than I expected.
Other than that, the product was almost exactly as pictured.
How was your experience with it?
I used the 17in. Spoke wheel because it is a MOTARD wheel.
I didn't wash the small parts such as the base of the Rim side Spoke as much as I thought I would.
I don't think I'll be buying it again after using it about three times through trial and error, although my usage may be bad.
It is more satisfying to use your own hands to wash with Sponge and feel clean. (It's cold)
[Points to note]
The white part of the Sponge is caught in the Spoke, and it comes off.
I don't think I'll go bald any time soon, but it's kind of sad.
How did it compare to other products?
I have never used this type of product from another company, so I can't compare.
View detail
It can be used in the Z900 20-year MODEL.
Because the license lamp has been changed to LED from the 2020 MODEL, the Connector of the license lamp attached to the Fender Eliminator Kit that is compatible up to the 19 year model cannot be installed.
I got information that it is the same as the Connector of the license lamp of Z900RS from the wisdom of the predecessors and bought this one.
It is possible to install an external license lamp without modifying the body side Harness.
It's just a Connector, but it's a bit expensive.
View detail
For the price, that's about as good as it gets.
The Roller is not well made and the rotation becomes wavy and difficult to turn the Tire.
It requires a lot of force, and it is hard to work smoothly with crunchy movements.
The Shaft is bent, or maybe it doesn't have Bearing in it.
View detail
It wasn't as good as I thought it would be.
I don't want my oil jug to get dirty, so I wanted to find a jug that could be used and stored nicely. I don't want to have to worry about it getting dirty, so I wanted to find a jug that I could use and store nicely. Purchase.
It has a lid, so I wonder if it will prevent dust from getting in during storage. I thought it was a good idea, but it was no good because it was pretty chancy.
I bought a KITACO Oil Jug after this, but this one is solid and has been used for a year. It's in there and it's working beautifully.
View detail
Fits: HONDA PCX, HONDA PCX150, HONDA PCX, HONDA PCX150
error in conformity
It did not fit KF30 ABS vehicles
I'm sorry that I didn't check the shape carefully and judged it based on the letters of KF30
When I opened the package, I noticed the difference in shape and was unable to return it, which was painful
For the DAYTONARed pads, part number 79867 will fit
View detail