Reviews
Easy to use
Easy to use for Spring View detail
I can use it
Crimp is no problem, but Chain cut is a bit difficult, so let's sander it! View detail
I was able to adjust it properly.
I have used it a total of three times on my medium and large motorcycles and have been able to adjust the oil level well each time without feeling any deterioration. (Purchased 1 year ago)
After use, I clean it lightly with Parts cleaner before storing it, and it has been used without any problems.
Cost-effectiveness is also Large, so a dedicated Tool is useful! (^^)
View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Better than expected.
Used in GORILLA.
It is Chromium Plated on Steel, which is better looking than the pure Black of other Manufactures, and the accuracy does not seem to be bad.
View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Too cheap, I'm afraid, but...
It will be needed once the NSR50 Wheel is installed.
It is cheap and too inexpensive compared to GCraft and others, but it is Chromoly steel, so it will be Large sturdy. 16T and no Limit interference inside the Crank.
View detail
Fits: HONDA SUPER CUB 90, HONDA SUPER CUB 50, HONDA SUPER CUB70
Dear CUB riders
The CUB has a light bulb that often breaks due to vibration.
This is the fate of a single cylinder engine without a balancer.
This is especially true for vehicles that have been bored up.
I think it's one thing to ask a motorcycle shop to do it, but it's easy to replace the bulb in the CUB, so by all means, keep it in reserve.
I Quantity feel the hassle of buying every single bulb.:I bought it in Set.
This is a complete set, so it's really convenient.
It's cheaper than buying from Single Item.
View detail
Good product
It is a good product 。 Wood, needle, wire brush hair (Wire) I used to substitute with etc., but the dedicated product is still good.
However, it is inevitable in nature, but the finer the material, the more delicate it is to store and handle it.
View detail
Fits: HONDA MONKEY, HONDA GORILLA, HONDA CHALY, HONDA DAX
Great quality
Made with very good quality metal, fit snug on drive shaft which is what you want, will definitely purchase this item again when/if need another one. View detail
sufficient for one's needs
Swing Arm, Suspension and Quantity:Purchased as a set
The chain is pricey in its own right, but it is still very solid I gave it a rating of 5 because I thought its durability would be no problem
View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
I used it 12 Bolt
It is good to have been cheaper than other companies.
Packing is also reasonable.
Do not you sell Rose? If you think of bulb out, please do also sell bulk!
View detail
Fits: HONDA Super Cub 90, HONDA Super Cub 50, HONDA Super Cub 70
You can save time and effort
After four balls in the box of Blinker Bulb I was wrapped in PetitPetit at Rose and entered the Vinyl bag and arrived.
We devised everything in the box and put it in a Vinyl bag and carry it around.
View detail
It is difficult to adjust power
I used it to replace Chain of OEM 428 Size with Chain of 520 Size.
Although it was my first work, since the handling Instruction Manual was written kindly and politely anyway, I could finish my work safely.
First I do the work of cutting the chain I am currently using with the Chain Tool, but it will be pretty exciting whether Pin will not break because Pin is pressed and it starts to move, it is very hard. Once you start to move it you can fasten more quickly.
Next, it is used for press fitting of Plate. Because you have to keep the position so that Plate does not fall off while holding down the press-fitting tool, I want three arms only at this time. In addition, the moment when press-fitting is completed, there is no standard as feeling of the hand turning Wrench, so it is better to move slowly and carefully until you get used to it.
Finally, Pin's Crimp work, but like this Plate press fitting, the feel of the hand is all in the end. Unlike Plate, if Crimp passes, Pin will be damaged, so I removed it many times and confirmed Crimp condition.
I think that you can work on Smooth if you get used to it, but since I do not exchange chains frequently in individual Levels in the first place, I think that it will be a few years later.
It is safe to pay the labor by Motorcycle shop and exchange it, basically it will be enough.
The purpose of purchasing this tool is to improve your own maintenance Kill and gain experience from all over.
In this age of mail-order sales, such selection can be made without ordering to Motorcycle shop. Depending on the location conditions at home, it may be very difficult to bring it to Motorcycle shop after ChainTrouble has happened. Also, if you are going to do long distance touring that is over thousands of kilometers, you will need to carry tools that can cope with sudden Trouble and Kill,.
Because it becomes amateur work, it is all self-responsibility. I succeeded this time, but I think that I missed it. Because failure is the best experience.
By maintaining this way yourself, your attachment to your Motorcycle will also be strengthened.
I would like to touch such a tool if it is a Motorcycle that I want to keep in touch with for a long time.
View detail
Even safe at first Chain exchange.
Purchase for Chain exchange of CROSSCUB.
Although it was the first Chain exchange, since it was with the Instruction Manual, Chain cut was also made easier.
Since it corresponds also to the Chain of the Large Engineering Displacement Volume, I'd like to try TRY also for the Chain exchange of GSX 1300 R HAYABUSA eventually.
View detail