Reviews
Wrap-around is necessary
I often use Dustcloth when working. I often cut and use unwanted clothes that I had stored at home, but I often run out depending on the work I have to do. I used to work at RecycleShop. "Bagged rags." I purchased and used the following at an inexpensive price. In that case, there was a small piece of gold on the cloth and it scratched the tank.
This Manufacturer's product is Paper waste. If it is a roll of Type, you can immediately identify it as a new product and use it without error. If you use a rag, the color of the cloth is different, and if oil gets on it during work, it is difficult to distinguish the oil from the rag. It is also convenient to distinguish the color of a new cloth.
The thickness is about 1mm and there is no unusual odor. The sewing machine has a fine line to cut it. It does not have any flaws when I tried to use it. This can be used for disassembling Brake and Carburetor.
Used Dustcloth is diverted to Oil suction, so there is no waste. When storing slightly used materials, be careful to separate them properly or they may damage the next material depending on what has been wiped in the past.
At our work site, we do not place the rolled Dustcloth as it is, but hang it through the Center hole with a rod. We try to keep the new dustcloth from touching the floor.
View detail
It is a companion for various tasks.
[How is it used?
Paper Dustcloth is an indispensable product in MotorcycleMaintenance, such as oil changes and wiping off minor dirt.
Was the one you received as per Image?
It was just like the image.
How was your experience with it?
It is durable and very easy to use.
[Points to note]
nothing in particular
How did it compare to other products?
I bought it from WeBig to adjust shipping costs, but I usually use Home center where they sell similar products at about half the price, so I always use that one.
View detail
Easy to use
It is very easy to use because one sheet is very thick and durable and does not tear easily.
Folding it up is a cosy way to use multiple surfaces.
I guess it depends on the frequency of use, but I am wondering how long it takes to use up a roll.
View detail
Along with Handlebar replacement!
Replace the tight cable with a new handlebar,
This is perfect!
The texture is nice and satisfying!
View detail
Long fork and handlebar replacement!
Used for long fork conversion and handlebar replacement!
The texture is nice and LargeSatisfied!
View detail
brake pad
Any concerns, cautions, or advice when purchasing good product the quality was very good i will order from here again i recommend you all to try it i have installed it on my harley davidson. View detail
Not bad!
I bought this one because I wanted to match it with Mesh hose.
I don't know if it's a quick look, but I personally like it.
View detail
Air cleaner review!
Shipping was really fast, I'm not going to lie
I really like the delivery time!
The packaging was also neat.
Installation actually seems to be about 2 stars out of 5 stars.
The product is easy to install and the design is so pretty.
I recommend it to anyone who decorates with a classic!
It was a little more expensive than other places, but it was okay thanks to the design!
I recommend! -------------------------------------------------- -------- Delivery was really fast without lying I really like the delivery period! The packaging was also clean. In fact, the difficulty seems to be about two of the five stars. The product is easy to install and the design is so pretty Recommended for anyone decorating in classic! It was a little more expensive than anywhere else, but it was okay thanks to the design! I recommend it! Powered by Google Translator
View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON SPORTSTERFamily
Good servics and have the right part that very rare item to find View detail
looks good
The quality is good, but there was no breeder bolt washer for the Cv carburetor
It is a bolt-on configuration and fits well.
Please note, however, that there is no breather bolt washer. ---------------- The Quality is Good, But there was no breeder bolt washer for the cv carburetor
Powered by Google Translator
View detail
Resistant to rust
Steel, not Material:The Stainless Steel hose band is rust-resistant and safe.
The quality is good and can be tightened securely.
Easy to use, easy to tighten and loosen, also GOOD.
It is convenient to accommodate changes in the thickness of the hose.
View detail
cheap
I bought this as a spare because the Valve in Headlight cuts out suddenly.
I Stocked it as insurance because it is inexpensive.
I don't know about brightness, etc. because I haven't run out of Valves yet, but the quality of the look is not bad.
View detail
Cheap but useful
Anyway, the price is very low and Reasonable, but
It is an ordinary Valve.
If you are not particularly particular, this should be sufficient.
Brightness is also comparable to NORMAL.
View detail
A must have for old cars
This is a must have for old cars, I used it on my CRcarburetor. I used it on my CRcarburetor. It looks good and is transparent so you can see inside.
But once I put the Hose on and tried to take it off again, it broke ….
Well, it's a cheap Parts, so what can I do?
View detail
This is Simple.
The Clamp part was unreliable and cracked.
It's a shame because it's cool.
View detail
It may not be suitable for Motorcycle.
I use it more for my car than my Motorcycle ^^. View detail
More of a viper than a COTA tuchord.
I used it on a 1960's Vintage motorcycle.
The Plug cord was about to decay due to heat damage from the Engine and age-related deterioration.
I was considering the replacement, but when I thought that it was a little tasteless with a normal Plug cord, I found this Vintage Style Plug Cord of Guts Chrome. Because the price is reasonable, I bought it.
Since a vehicle is a vehicle, performance is not what we are looking for in the first place.
This is a complete appearance oriented parts.
So I can't make any Impressions about the performance, but so far I haven't had any problems.
The look I was interested in was honestly not what I was expecting.
I was hoping for a COTA tucord-like dorkiness, but it's more of a venomous snake pattern than a COTA tucord with a stronger Vinyl feel than I was expecting.
It's a small one that looks like it belongs in a country garden or something.
Still, I think that it is more interesting than using a normal Plug cord. Because I thought, I use it as it is.
By the way, the outer diameter is a little thinner than NGK's power cable. The noise to the CDI etc. might be increased if the leak resistance is low. (I'm not feeling it.) 。
On the other hand, I think it is easy to use for hiding Wiring in Ska tune.
The rubber or vinyl coating on the surface makes it look a little hard, but it becomes soft when warmed.
View detail
Overpriced performance.
Anyway, the price is very cheap and reasonable, and the performance is no different from NORMAL Headlight Bulb. I think it's very convenient to keep it in stock. I think it depends on the usage situation, but it is durable and long lasting. View detail
Convenient for Stock
I have 3 HS1 Scooters in my stock and they are the best headlight bulbs for my inventory as they are compatible and cheap. View detail
su air cleaner
It's cheaper than buying in the US and shipping is fast thanks to DHL shipping. It appears to have arrived within 2 days of delivery. It has not been installed yet, but the packaging is good and the product looks good. I was happy to be able to purchase it on webike, although it is a product that I can't find anywhere I look. I will write well. View detail