Reviews
DAXAir cleaner
Good cosmetics,
Mounting Bracket Location OEM and
Spacers are not required because of the difference.
View detail
For ChainSelfMaintenance
I had been doing maintenance of the chain by myself, but I was not satisfied with the results, so I decided to purchase the equipment.
Both parallel and perpendicular can be checked.
Analogous method, but therefore reliable.
I think it is a good item to have, and I recommend it to those who do maintenance of looseness and deflection of a chain by themselves.
View detail
Among the many that are out there.
I chose this product to get Chain Alignment since I changed the Chain of MONKEY125 to Seal chain.
The reason why we chose this type is that there are many types of this type from various manufacturers, but the Screw that fixes the Sprocket to the Material:Plastic, and that was the criterion for our choice.
It is not a good idea to get scratches, no matter how hard it is to see them.
I got a 40cm Aluminum rod separately because the Aluminum rod was too short according to the reviews from other seniors.
I think it is cost-effective if it is mentally satisfying, although I think it can only provide a comforting adjustment.
View detail
It's cheap and there's a lot of it, so don't be afraid to use it.
I bought this for a variety of versatile uses.
For the time being, I plan to use it to wipe down after car washes, spray up simple coating agents, clean Helmet, and if there is any left over, to clean the house.
I thought it was a Small one after reading various Reviews,
It was a bit larger than I expected, just enough to cover the top of the helmet. (I'm posting a picture.)
The texture is the same level as that of common micro fiber,
It is not of a particularly high quality, but I think the strength of the Largeest is that you can use the GunGun without hesitation, and it does not get scratched easily even if you wipe up the Cowl.
I would buy it again when it runs out.
View detail
Large satisfied
I used it with RigidMONKEYZ50Z and it is very good.
As expected, it is designed for the 4mini and is very easy to use.
I regret that I should have purchased it earlier, but I own several MONKEYs and will use Large for maintenance.
View detail
Fits: HONDA GROM, HONDA MONKEY125, HONDA MONKEY, HONDA DAX, HONDA MSX, HONDA XRMOTARD, HONDA CHALY, HONDA APE, HONDA CT125CT110 HUNTER CUB
MONKEY125 beware.
Purchased for maintenance of MONKEY125, such as oil replacement.
Be careful when lowering.
If you lower it too vigorously, your hand may get caught between the Arm of STAND and the License Plate.
Hands get caught, License Plate gets bent….
but with great strength and stability.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Pink Glamorous Fuel hose
I bought myself a pink transparent hose. I liked it because it is transparent and pink - you can control the availability of fuel in the system, and the pink color gives charm to the motorcycle. Hose dimensions: outer diameter 7 mm, inner diameter 4 mm. I bought myself a pink transparent hose. I liked it because it is transparent and pink - you can control the presence of fuel in the system, and the pink color gives charm to the motorcycle. Hose dimensions: outer diameter 7 mm, inner diameter 4 mm. View detail
Handlebar Up Type changed to long wire
The product is for MONKEY, but it can be used with Super Cub custom Handlebar Up TypeSpec. and it is good to replace it with stainless mesh. View detail
Terminals Waterproof and for insulation
Used for the crimping part of the Brake terminal.
Mainly for waterproofing purposes. To be honest, I thought two Shrinks would be enough, but I was attracted to the fact that there are various types of Covers and that they come with a Case. I will keep it for a while because I can use it in case of emergency.
View detail
I couldn't use it well.
I bought this tool because I am not good at putting the piston through the cylinder when assembling the engine of MONKEY. However, I could assemble the engine better by hand without using the tool, probably due to my lack of skill. View detail
Used to convert 6V vehicles to Clear blinker
[How is it used?
[Color] I changed to ClearEuropean Blinker and needed Orange bulb.
How was your experience with it?
Works fine. Unlike the cheap Orange bulb, the paint was well done.
How did it compare to other products?
I'm afraid you don't have to worry about 6V Orange bulbs because there are very few options.
View detail
Fits: HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA NSR80, HONDA NSR50, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50, HONDA APE 100, HONDA APE 50, HONDA DAX, HONDA GORILLA, HONDA MONKEY, HONDA glom
Sprocket
Sprocket, one of Motorcycle's smallest cogs. View detail
Fits: HONDA CD50, HONDA SUPER CUB 50, HONDA LITTLE CUB50, HONDA CL50, HONDA BENLY50S
Together with Engine Displacement VolumeUp
The cylinder was changed to a 50mm bore, the crank was changed to a 52mm stroke, and the engine displacement volume was increased to 102cc, so even in 4th gear, the engine would blow up in no time and was not busy. However, when the Driven Sprocket was set to 17T and the Driven Sprocket to 30, the car now has a mild acceleration that makes full use of the Torque and allows the driver to easily go with the flow even on main roads. View detail
Used for Dax125
I use it on my Dax125, 12inch size and I was wondering if it would be Large sturdy, Large is Reasonable and I was worried about the quality, but it was no problem at all. I was worried about the quality, but it was no problem at all. I would like to consider the for Front next time. View detail
GORILLA2V Change
Purchased 6VGORILLA for 12V changeover.
It was easier to do than collecting in Rose.
View detail
Not into TTR. (___;)
Not into TTR. (___;) View detail
Fits: HONDA MONKEY, HONDA GROM, HONDA MSX, HONDA APE, HONDA MONKEY125, HONDA DAX, HONDA CHALY, HONDA XRMOTARD, HONDA CT125CT110 HUNTER CUB
Lightweight and just right for groms.
It is tiny and ExactlySize for groms.
I just put Swing Arm on it, but it is stable.
(Caution!)
Normal rear fender will cut your finger on the License Plate if you are not a little careful.
I will try Fender Eliminator one of these days.
View detail
Compact
Purchased to cut a Chain that was purchased with the wrong number of LINKs.
It is very compact.
View detail
Fits: HONDA SUPER CUB 90, HONDA APE 50, HONDA APE 100, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB70, HONDA MAGNA 50, HONDA LITTLE CUB, HONDA DAX, HONDA MONKEY R, HONDA JAZZ, HONDA NSR50, HONDA MONKEY, HONDA GORILLA
[Be careful. It could not be used for cars equipped with BigDrum.
On the webike Compatible Car Models I have read that it is possible to fit the last model c90 with BigDrum.
If you are purchasing more than one item, please contact us for the delivery time. If you purchase more than one order, please contact us for the delivery time. "All the materials used are right in front of you." If the goods are laid out and then worked on, acceptance is very often performed on the next vacation or two following the day of the slowest delivery. 。 When discovered, a situation will occur where the return date will pass.
? Almost no problems are encountered in the acceptance inspection process in the case of the exterior 。 However, in cases such as the Drum Brake Shoe, which was only discovered after disassembling the motorcycle, I felt the need to check impressions and youtube comments at the same time. 。 This time, we will release it to Mercury and respond.
View detail
Fits: HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA NSR80, HONDA NSR50, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50, HONDA APE 100, HONDA APE 50, HONDA DAX, HONDA GORILLA, HONDA MONKEY, HONDA glom
Fixing plate defective
Fixing plate could not be installed and we had to use the previous Plate.
If you want to purchase this, you normally recommend KITACO.
View detail