Reviews
Fits: BMW HP 4, BMW S 1000 R, BMW S 1000 R, BMW S 1000 R, BMW S 1000 RR, BMW S 1000 RR, BMW S 1000 RR, BMW S 1000 RR, BMW S 1000 RR, BMW S 1000 XR, BMW S 1000 RR, BMW M 1000 R
2023 BMW M1000RR Not for installation
[How is it used?
The BMW K66 M1000RR 2023 cannot be installed because the RearSwing Arm is different from the previous shape.
Perhaps it could be installed on a 2023 BMW S1000RR.
Was the one you received as per Image?
I think it looks good.
Was the installation difficult?
Can not be installed
How was your experience with it?
Not available
[Included Parts:were they on?
Necessary because there is no
[Was there anything that disappointed you?
all
Other items that would be helpful
Point of installation and hang x
Instruction Manual (English description)
Ease of understanding x
Note:Included Parts:are not included and must be purchased.
Items Included Parts to be purchased together:.
Opinions on Manufacturer
Requests Cannot be installed on BMW K66 M1000RR 2023.
I would like to see a product that can be installed.
or color (Spenser) I think it would be a good idea to serve the
View detail
Shape differs from the photo shown!
The photo shown here differs from the photo of the item sent to us.
The photo shows a slightly angled one with a split center, one side was Straight, so I bought it, but the one I sent is 90° right-angled, and the other side is a slightly slanted shape, which is totally different.
Only the color is the same in purple, Material seems to be resin and scratch resistant and looks good, but the shape is different from what I wanted. The price is not good.
View detail
Interference with clutch lever
[How is it used?
Daily use such as commuting
Was the one you received as per Image?
Not on Image Street.
Was the installation difficult?
Difficult.
How was your experience with it?
Grip slips.
[Included Parts:were they on?
Already included.
[Was there anything that disappointed you?
It was mentioned that the Small diameter was used to reduce interference with Lever,
Interference was found. close to the Switch box up to Limit,
I used a curved Clutch lever and it interfered with the Flange.
Flange diameter of this product:Φ57mm
OEM Product Flange Diameter:Φ44mm (measured with Caliper)
This will cause interference.
View detail
Fits: SUZUKI SKY WAVE 400 Limited version (SKYWAVELLIMITED bar John), SUZUKI SKY WAVE 400 (SKYWAVE), SUZUKI SKY WAVE 400 (SKYWAVE), SUZUKI SKY WAVE 400 (SKYWAVE), SUZUKI SKY WAVE 400, SUZUKI SKY WAVE 250SS (SKYWAVE), SUZUKI SKY WAVE 250B Limited version (SKYWAVELLIMITED bar John), SUZUKI SKY WAVE 250B Limited version (SKYWAVELLIMITED bar John), SUZUKI SKY WAVE 250, SUZUKI SKY WAVE 250, SUZUKI DJEBEL 200 (DJEBEL), SUZUKI DJEBEL 200 (DJEBEL), SUZUKI DJEBEL 125 (DJEBEL), SUZUKI DF200E, KAWASAKI EPSILON 250 (Epsilon), KAWASAKI EPSILON 250 (Epsilon), YAMAHA Maxam (MAXAM), YAMAHA Maxam (MAXAM), YAMAHA Maxam (MAXAM), YAMAHA MAXAM (MAXAM)
O-ring Size does not fit
VANVAN200
However, the size of the O-ring does not match, even though it is included in the applicable car models.
I need to order OEM to use it.
View detail
Fits: HONDA CB750C Custom, HONDA CB750F Super Sport, HONDA CB750K, HONDA CB750L, HONDA CB750SC Nighthawk
The image and the real thing are different.
The image and the actual product are completely different.
Because there is no number engraving and all four have exactly the same shape,
When I try to install the Carburetor, it does not go all the way in.
In addition, the Carburetor fell out of the Indicator when trying to fit it into the OEMAir cleaner, making it completely unusable.
View detail
I found it difficult to use myself.
Maybe I am clumsy, but I was able to apply it more neatly when working with FreeBand. If you are dexterous, this is a good product. View detail
Fits: YAMAHA XT225.S, YAMAHA XT225.S, YAMAHA XT225E, YAMAHA XT225L, YAMAHA XT225L, YAMAHA XT225LC, YAMAHA XT225LC, YAMAHA XT225W.WE, YAMAHA XT225EC, YAMAHA TT-R225, YAMAHA XT225 SERROW, YAMAHA CELLOW 225, YAMAHA TT-R225, YAMAHA XT225 SERROW, YAMAHA CELLOW 225
It's gory and doesn't move well.
I purchased and installed it thinking it was equivalent to OEM Product.
Normally, the Wire should move smoothly in response to Throttle operation, but this Wire moves with a gurgle and a sense of resistance.
The operation feels as if it were a Wire that has reached the end of its life span.
Wire is also thinner and less reliable than OEM.
There was no point in buying this product.
Rebuy OEM Product.
View detail
Fits: SUZUKI DR-Z 250, SUZUKI RM 125, SUZUKI RM 250, SUZUKI RM-Z 250, SUZUKI RM-Z 450, SUZUKI RMX 450
It didn't match.
I installed it, but it doesn't fit. It was guaranteed to fit, but it doesn't. I'll return it and buy another one that fits. I will return it and buy another product that fits. View detail
Magic tape is the worst.
It's battery powered, so there's no back light, but that's not a problem.
When it gets dark, you can't see it at all.
It is attached using the Magic tape method.
The quality of the double-sided tape of the Magic tape was not good enough and I had to put the Magic tape on and off several times.
Body and Magic tape started to peel off.
Glue left on Body and became sticky….
It's a very expensive product for an electric Tachometer.
What's wrong with Included Parts:being worse than it should be?
And even though it's battery-powered, there's no machining of the Magic tape on the battery part.
It's a shame that it's a DAYTONA product.
View detail
Fits: KAWASAKI KSR-I, KAWASAKI KSR-II, KAWASAKI KS-II, KAWASAKI KSR-110, KAWASAKI Z125PRO, SUZUKI LETS II-S, SUZUKI SEPIA ZZ, SUZUKI SEPIA RS, SUZUKI ShotS, SUZUKI Address Tune, SUZUKI AddressVTune, SUZUKI Address50, SUZUKI ZZ, SUZUKI HI-UPR, SUZUKI GAG, SUZUKI ADDRESS V100, SUZUKI ADDRESS V100, SUZUKI ADDRESS110, SUZUKI VECSTAR125, SUZUKI ADDRESSV125
I can last three years
In 3 years, the Black will fade and become White, and it will catch and become ragged.
It needs to be replaced periodically.
Exhaust Guard is included in the price.
View detail
The product in question is PPF.
If you look at the last photo, there is something that looks like an Easy Grip knee grip pad attached to it, so I bought it just based on that.
But when I received it, it was just PPF film. Of course, it's my fault for missing the detailed photos, but if you look at the last review photo and review, I'm leaving a review in case someone is fooled like me -------------------------- -------------------------------- If you look at the last photo, there's something that looks like an Easy Grip knee grip pad attached, so I bought it just looking at that. But when I received it, it was just PPF film. Of course, it's my fault for missing the detailed photos, but if you look at the last review photos and review, I'm leaving a review in case someone is fooled like me. Powered by Google Translator
View detail
Durability is difficult
It was installed and working properly, but it broke after a period of one month and a distance of about 200Km.
The symptom is that the blinking speed becomes slower and slower, and eventually the light stops blinking and stays on.
Cheap ones are no good. I should have not been stingy and went with KOSO's Relay, which has a proven track record in other Motorcycle products.
View detail
Bolt
Bolt supplied with Swing Arm does not fit View detail
Yellow-colored areas fall off considerably.
I had no problem with the fit since it is the same size as the manufacturerOEM, but the yellow-colored part on the back of the sponge is falling off. But the yellow-colored part on the back of the sponge is falling off.
I have a feeling that if Carburetor sucks this in, it will clog up, so I will not use it and buy OEM.
View detail
Oshaka in a month
The contact fused and left the Stop-lamp on and the Lens melted, a cheap mistake. View detail
![[Closeout Product]Handlebar End IP[special price]](https://img.webike-cdn.net/catalogue/images/116115/LG-IP-22g_01_TS.jpg)
Fits: APRILIA NA 850 Mana GT, APRILIA NA 850 Mana, APRILIA RS 125, APRILIA RS 125, APRILIA RS 125, APRILIA RS 125, APRILIA RS 250, APRILIA RS 660, APRILIA RS4 125, APRILIA RSV 1000 (Mille), APRILIA RSV 1000 (Mille), APRILIA RSV 1000 R (Mille R), APRILIA RSV 1000 R (Mille R), APRILIA RSV 1000 R Factory, APRILIA RSV 1000 R Factory, APRILIA RSV 1000 R, APRILIA RSV 1000 R, APRILIA RSV 1000 R, APRILIA RSV 1000 SP, APRILIA RSV 4 1000 RR
It says it is TMAX560 techmax compliant, but it is completely useless.
I bought it because it was supposed to fit, but it did not match the Screw shape of the Handlebar End at all. I was very disappointed. View detail
Fits: KAWASAKI BALIUS, KAWASAKI BALIUS II, KAWASAKI ER-6F, KAWASAKI ER-6N, KAWASAKI GPZ900R, KAWASAKI VERSYS1000, KAWASAKI VERSYS650, KAWASAKI Z1000, KAWASAKI Z750, KAWASAKI Z750S, KAWASAKI ZEPHER, KAWASAKI ZEPHER1100, KAWASAKI ZEPHER750, KAWASAKI ZR-7S, KAWASAKI ZRX1100, KAWASAKI ZX-11, KAWASAKI ZX-12R, KAWASAKI ZX-6R, KAWASAKI ZZR1200, SUZUKI BANDIT1200
The pictures are confusing.
I bought this for use on a 2023 SV650.
It's my fault for not checking carefully, but I saw two Levers in the sample product photo, so I decided to order a Quantity:Pair (for Left and Right) Quantity:I bought it thinking it was Pair.
When it arrives, it is only Brake lever.
I had no choice but to purchase an additional Clutch, but since it was not sold for the SV 650, I had no choice but to return it.
The product itself had a good texture, but the sample photos were confusing.
View detail
Fits: SUZUKI Address50, SUZUKI AddressV110, SUZUKI Basket, SUZUKI LETS, YAMAHA VINO, YAMAHA JOG, HONDA dunk, HONDA glom, HONDA TACT, HONDA Giorno, HONDA DIO, KAWASAKI Z125PRO, KAWASAKI KSR-1, SUZUKI BIRDIE, SUZUKI VECSTAR150, SUZUKI VECSTAR125, SUZUKI ADDRESS110, SUZUKI ADDRESS V50
just plain unsatisfactory
This time, due to various circumstances, we gave up our liter SS and purchased a new GROM after a Hara 2Scooter.
It is my first new car in about 16 years, and although it has a roof, I have to park it in a place where it is almost exposed to the rain, so I decided to buy a Cover first and foremost!
When I put the cover on, it doesn't fit well. I think the height of the Mirror and parking with the Handlebar turned off are not taken into consideration.
Even with very careful Cover, the slightest breeze would roll it up to the Front Fender (I reapplied it this morning, but it was rolled up before noon).
It also has a Belt at the bottom to prevent flapping, but the Belt was not threaded through the Male side of the Buckle.
We are in the process of applying for a conformity warranty, but will replace it even if the application is not approved.
If your application is not approved, you are throwing away Gold. I definitely do not recommend it.
View detail
![Compact half cover [large]](https://img.webike-cdn.net/catalogue/images/91554/22144_TS.jpg)
Fits: KAWASAKI Z1000J1, KAWASAKI Z1000J2, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Ninja H2 SX SE, KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SE+, KAWASAKI Ninja H2 CARBON, KAWASAKI Ninja H2, KAWASAKI Ninja H2 SE, KAWASAKI ZEPHYR1100 RS, KAWASAKI 1000GTR, KAWASAKI GPZ1000RX, KAWASAKI GPZ1100, KAWASAKI GPZ1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100 II, KAWASAKI ZZR1100(C)(ZX-11), KAWASAKI ZZR1100(D)(ZX-11), KAWASAKI ZEPHYR1100
Small
I bought it for my BMW R1150GS because it fits VST 1050, but it is smaller than I expected. I bought it knowing that it would not fit over the SIDEPannier, but I did not expect that it would not fit over the Top case either. The storage is compact. View detail
Friction plate interchangeable part number different
I bought it believing it was an interchangeable part number, but the Friction plate is completely different.
It's 4EU, so it should arrive at tzr50r, but Size is completely different.
Garbage box destination.
View detail