Reviews
Great atmosphere when used with old foreign cars.
Fuel hose with coated cloth on the surface of rubber hose of Gasoline resistant.
So-called "Cloth Wrapping In the case of Brake, it is used in the connection between the Master Cylinder and the Reserver tank.
However, the cloth-wrapped hose used in brake, especially brembo cloth-wrapped hose, is often just seriously wrapped with cloth on the outside of the hose, and if left unattended, it will fray from the edges.
Because it is cloth, liquids soak into it, so if Fluid or other liquids soak into it, it is Large strange to wash it off!
This Hose, however, has a slightly different atmosphere.
First of all, although it is called cloth-wrapped, the cloth part is also coated with thin rubber, so the cloth does not come loose from the RoseRose.
This alone is worth it!
In addition, the surface is finished to look like it has been rubber raincoated, so it is resistant to liquids and overwhelmingly stain-resistant.
It is highly recommended for use on old foreign cars to create a great atmosphere.
The weakness is that it is sold in 50cm increments.
I purchased the 2.5Meter quantity in bulk and received 5 50cm Hose.
The description of the product says 50 cm, which is of course correct, but I would have been happy if it had been delivered in 1 pc of 2.5 Meter rolls...
View detail
Installed on st250eType
[How is it used?
st250eType is set to Separate Handlebars.
Was the one you received as per Image?
Image is as shown in the Image, Parenthesis is good.
Was the installation difficult?
I asked Motorcycle shop to change Top Bridge and LightStar at the same time.
How was your experience with it?
I'm very happy with it
[Was there anything that disappointed you?
It would have been better if there were more hanging angles.
View detail
Style is good! Accuracy is extremely poor!
It is short, small, and the handlebar area is refreshing. The back is almost invisible, but I like it because of its excellent style and texture.
The accuracy of the screws for adjusting the angle of the Mirror is so bad that the screws on the One Side are spinning around and not tightening properly. This must be replaced. What kind of tools are they using when assembling? It's just too much.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
This Gold amount is fine, please.
This Gold amount is Large and sturdy, so please take care of it. View detail
I was satisfied
Nothing to say!
But be careful with the volume!
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA XS650 sp, YAMAHA SR500, YAMAHA SR400, YAMAHA XS650 sp
I like Caliper.
Unlike cp2696 and GRIMECA, this Caliper has a Dust Seal, so you can get a long maintenance cycle, and there are repair parts such as Seal, Pad and Pin. The best thing is that it doesn't squeal easily. View detail
Very good stuff! But …
It's a shame the installation is so different from the pictures
I bought this product because I liked the shape of the mounting in the picture, and I had some doubts about returning it, but the quality of the product is very good So I decided to use it as is
Anyway, I'd like to see the pictures changed to OEM vehicles
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
really happy with the result
i was a bit worried that i was spending a lot of money and the seat might eventually not fit. all my worries were unfounded as you can see on the photo. a small pull-off - to mount the seat i needed to push the seat a bit apart, because the screw nuts were a little too close together. for me the seat could be a couple centimeters longer, that the end of the seat is on the same line than the screws of the rear mudguard. over all i'm really happy and everything's fine for me. With best regards from switzerland Dom View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, KAWASAKI W400, KAWASAKI W650, KAWASAKI W800
The finish is excellent, but the structure is a bit disappointing.
The blinker interval is a little short when a small blinker is installed, so visibility from the front is insufficient. Since the horn mounting part is bent too high, it is very difficult to replace the horn. Of course, having the horns closer to the bottom of the fuel tank has the effect of improving the look. The winker spacing is a little short when the small winker is installed, so the visibility from the front is insufficient. The horn attachment part is bent too high, so it is very difficult to replace the horn. Of course, the horn sticks tightly under the fuel tank, so there is a better effect.(translated by Google Translator) View detail
The texture is good
Although the appearance texture seems to be sturdy, attention is necessary as Mesh unravels if it gets wet with Gasoline. I think that the performance of Hose itself also has moderate hardness and it is good. View detail
There is also thickness of Aluminum and processing accuracy is no problem
Material : Plastic's License Plate is also available, but in order to get more VINTAGE stuff like Material : Aluminum's here.
I was wondering if it was thinner, but there are thicknesses, a car with many vibrations (SR400) But it seems Large is durable.
Because it is Aluminum, I would like to enjoy the taste as I polish it, because I feel like I've been left untouched.
Just a little expensive ...
View detail
There is also a certain degree of hardness and looks like Cool
Soft Fuel Hose has a part that will become thinner in handling but this is the best in terms of heat resistance as well as appearance as there is Mesh around Hose View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Is it shorter than the picture?
I attached it to the SR 400
Installation was easy with amateur myself
Seat is TandemSpec. It is not,
I felt it was shorter than the one in the photo.
I like the appearance and I am satisfied..
FI Vehicles seems to require a separate Bracket, so I think that it is better to consult with a dealer.
View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, KAWASAKI W400, KAWASAKI W650, KAWASAKI W800
Price suitable
It is a w800 ride.
When changing to popink made Blinker buy thought to change Position anyway.
The product which came arrived for sand painting why, Rust also stands out. (It seems that I kept it even outside for a long time. )
In addition, as it is installed, as it is hidden all by Fork Boots when seeing from the front, there was a fear that it could not go through the vehicle inspection, so somehow managed by Extend Bracket made by Huriken.
If you align the Blinker's orientation in parallel, looseness will occur, so Screw lock will be used in the future.
Things were not good, but it seems that it looks good as it looks like Refreshing.
View detail
Very easy to install. It was possible to complete the installation by myself. I'm very satisfied with the appearance and performance of the part. I'm also satisfied with AN-BU's other parts. The black paint has not faded from the engine heat. I would like
Very easy to install. It was possible to complete the installation by myself. I'm very satisfied with the appearance and performance of the part. I'm also satisfied with AN-BU's other parts. The black paint has not faded from the engine heat. I would like to see AN-BU produce a shorter exhaust in black similar to WM. I highly recommended this exhaust and all other AN-BU parts I have used to date. View detail
although the Separate handle of the HURRICANE, etc. were probably time-tested products if it was TZR50 -- -- he wanted the thing different from [ some ] people, and it purchased.actual thing is finished very smartly, and is satisfied dramatically.
although the Separate handle of the HURRICANE, etc. were probably time-tested products if it was TZR50 --
-- he wanted the thing different from [ some ] people, and it purchased.actual thing is finished very smartly, and is satisfied dramatically.
-- a small Motorcycle merely like 50 cc -- being alike -- it may be somewhat long ..
View detail