Reviews
Personally, I'd like to see a little more Small
Purchased for the XR250
The Tanax Moto fizz ShellSeatBackSS I've been using has a height of 17 As high as 3mm, it's quite conscious when straddling a motorcycle
The legs that used to be able to lift in town riding get tired from driving in the woods, etc., and the SeatBack You will get stuck (Maybe it's due to the high Seat high and my age.)
The burden of taking off the SeatBack and carrying the luggage for it is Large
It's just easier to fix tools and other heavy and bulky items to the Motorcycle Nice Large sized piece of equipment
Decided on the product
It was only available in Inch display, but the capacity is about 3.2 liters, and it's a large size with a reasonable height and width
I thought it would be ideal if it were a little shorter in length so it could be installed horizontally
As the product name says, it is for a rear fender, but it comes with a Bolt, a Washer and a stopper Fix it to the fender with the Nut (4 places in a box)
It's easy to drill a hole in any place you want and fix it in place, but the product and Drilling a hole in the Motorcycle's Fender took the plunge (give up)
Well, there's a ring at the four corners that I don't know what it is, so maybe that will hold it in place..
I installed it on top of the Mojabi Side Back myself, but it's a little bit of weight in front of me I drilled a hole in the position and made a Rubber collar to reduce the gap between the Fender and
I fixed it so that there is no wobble in the Back and Bolt
There was still plenty of room in the KTC's Tool bag for air gauge, gloves, etc
Anti-theft locks can also be installed
Thanks to this tool bag, the Side Back has a raincoat, Tire wrench and Can hold Puncture Repair Kit, foot-operated Cylinders, etc So should you be able to handle Trouble on the go?
Large size of the Tool bag is 27.94cmX15.24cmX7.62cm
Toolbox, Mounting Bolt Set and Instruction Manual (Achara) With (word)
The inside is a stylish orange color
View detail
Convenient and Cool Storage Case
YAMAHA_VIRAGO250 but it's a motorcycle with no storage capacity
To hold spare brake lever, clutch lever and needle gold
Purchased
I've found less expensive ones in stores and on the Net
I saw other people's imprecisions and thought”I like this”and
I made a chase purchase
It was a good product that didn't lose its shape when I tried it out
View detail
Instead of MONKEY125SIDE COVER
I am using DHB-7 1.5L, but the capacity is a little short, so I am considering buying DHB-8
This one is only 2.0L, and from what I've seen, the only difference is the height dimension, so I'm not sure if it's a DHB-7
Large roughly calculated the height from the dimensions, and since it seems to fit nicely on the Right Side, I decided to buy it This was the case
One-touchBracket is used to open and close the top cover, making it very easy to open and close
It's not flashy in appearance and the design is not boring and will last a long time
The attached Belt seems to allow me to fix it in any position, but again, I didn't use it
For 2.0L, the Puncture Repair Kit for Tubeless and DRC foot wiping formula The Inflator and Air gauge are included
View detail
It's a bit premature
I've been wondering how to down type exhaust system of MONKEY125 I'm here, sir
You can just hide or decorate the empty space of the former Right SideSilencer It's a waste of time to do it (I found someone on the Net who has installed a similar tool bag, so let me refer to it (I received it)
Some Manufacturer The Right Sidewith Small PurseSide cover kit I bought this Tool bag to install it until they gave me a reasonable price for it
It seems to interfere with the Clutch Wire etc. if it is over 1.5L
The bracket is one-touch type and easy to open and close
Puncture Repair Kit for Tubeless Tire and Smallest Limits Tool It's a bit tricky because you can put a
I think it's safe to go away
Just fix it to your car with 2 bands, but when you install it to MONKEY, you can use
I'd like to put a twist on it (When I'm ready.)
View detail
Yippie Back
It is installed on the JA45CROSS CUB, but it has been designed for Quantity:Pair (for Left and Right) I wish I had it in
It's solidly made and turned out a nice color when I applied Wax
View detail
I use it as Handlebar Bag.
Originally attached to Rear Fender, Belt with One-Touch Operation Lock is Quantity : Because it is with 2pc, it seems that it can be installed even if it is not Rear Fender.
When attaching Tank Bag to the MT - 09 tracer I was searching for Porch which is installed around Handlebar absolutely because the style is bad.
It is not bad as it is fitted to the Racer's Handlebar in dimensions and it is handy for taking in and out of a smartphone or a wallet.
Installation Belt can be installed securely because it can be adjusted in length, it did not flap on the highway.
There is only one point, Waterproof nature. WaterproofFastener is not attached.
It seems like a product made as a Tool Bag that only inserts tools, and seems to be unable to put things that should not get wet.
That is the star Minus 1.
Others are satisfied.
View detail
It suits XSR 900!
I attached a Seat bag and had Rain jacket and a thin windbreaker Inner, but usually I thought that I wanted to remove the Seat bag.
Capacity is just a good size because Rain jacket & windproof Inner was enough.
Because you can adjust the capacity with Belt, this is enough for nearby touring.
I think that Design also matches XSR 900.
I brought the installation to the position where I could not get through the gap of the Seat frame somehow.
* Since it is hanging from the Seat frame and the bottom of Bag goes inside, attach it so that it hits the BagReverse side and fix it lightly with Tie Wrap.
View detail
I tried to attach another one
I installed only One Side the other day, but the capacity is still 3. 5 L is not enough.
I bought another one again.
But One Side had a bit of a hard time, but when I become one more, I will do everything once from Rose Case.
Although it took a hard time by trial and error it took more than 2 hours but I could install it.
I wrote Impre the other day so I will write it as a little helpful.
The method
1. First I did not use Band from the beginning, I used the Band I purchased the other day.
2. Thread the Band through the hole through the Tool Box.
3. Band dunk below Tandem seat and put it through the hole of the Tool Box again (Second time) Fix it
4. In my case I was a little long as it was a long time (2m) I think that it is a little short
5. Lastly, since the Tool Box hits Rear Fender, I protected it so that it will not be hurt by Cushion.
I think that it is impossible to move a little by force, so I tried installing it so that it can move slightly.
View detail
Size sense and design is good
I found it if I was looking for a little Large textile bag.
Size feeling is just right.
I like shades, but when I use it every day for about half a year I fade in color as well.
So it is painting once.
It is strong and I am using it for over a year but there is no problem at all.
View detail
Bag itself is exactly good
I purchased this American Type Motorcycle for the first time.
I had it until now (PCX) Rear trunk was not attached and it was troubled without any loading ability
I do not want to attach too much Side bag, I found this item that I am looking for and can also use this Tool Bag & Side bag and bought it.
Just did not install Band and I searched for installation Band, somehow managed to install today.
Easy to Implease
1. First of all, it is 3. The capacity is 5 L and Small, but if it is a Small one (Rain gear etc) It is enough to enter.
2. Bagle (Stopper gold tool is) Although it can be tightened tightly, although it takes some trouble to take out
3. To install, tighten the commercially available tightening band through the bottom of the Tandem seat.
It was surprisingly securely attached.
4. Although the upper part is certain but the lower part I want to see how the parts still remain because there is little movement at the moment
Although it is simple more than that, I told you the feeling that I installed, but I put rain gear and gloves when I stopped for the time being.
After that I do not know how it feels like rainy day, so I think I will make Cover.
View detail
It looks good
It looks nice, but you should not expect storage. It is easy to install, but it is Minus evaluation that it makes it da RAN without fixing it. However, Parenthesis is good. View detail
Smaller than expected
3. It's 5L capacity, but I still do not leave the Tool Bag area
Rain gear is about to enter Limit
However, considering the price can be said to be good products
There is not much insistence on appearance, Parenthesis is good
View detail
To Swingarm.
BOLT Shoulder Bag's body Left Side was lonely so I tried installing it on Left SideSwingarm. In the attached Band, the tightening is loose and it is dangerous that it falls under the BeltGuard on the lower side, so between the BagBody and Swingarm, cut a 2 mm thick Rubber board to the appropriate Large size and paste it with Double - sided Tape and Tie Wrap 4 I tightened it tightly and fixed it.
While instant Puncture repair agent is put in it, it shakes up and down with vibration during running so that the BagCenter part was shrunk with a thin Belt of 100 yen uniform, became a shake.
Originally it is not a thing to install in such a place, but I am satisfied personally.
View detail
A solid Tool Bag
【What made you decide the purchase?】
In preparation for the Trouble at the destination, I purchased it because I wanted to install a tool in Motorcycle.
The deciding factor of purchase,
- KTCBrand
- What was a popular item
- Size feeling seems to be just right
- Durability of the fabric seems to be good
Etc.
【How was it actually used?】
(capacity)
A fair amount of tools are included.
From Left of image in order
- Radio pliers
- MONKEY Wrench
- Pliers
- Nipper
- Ratchet Handlebar
- Double-end Wrench(8 - 10 mm, 10 - 12mm)
- Socket(Hex bit3 - 4 - 5 - 6 mm, hexagon 8 - 10 - 12mm)
- Needle gold
- Gum Tape
- Ratchet driver
- Air gauge
- Scissors
- (It is not shown.) Spare Plug X 4
I will enter this much.
I think that you can cope well with Trouble which tends to occur on the road.
(Size - weight)
Size of the image with the tool put in,
Approximately 27 cm in width, 13 cm in length, 11 cm in thickness, weighs about 3 kg.
It is quite Large and has weight, so it is difficult to put it under Seat. I am putting it in Tank Bag.
(Portability)
Since there is no possession, inserting many tools is difficult and hard to hold.
So I sewed Magic tape sewn on Nylon strip like image, passed through Belt of Tool Bag and made hand of Original.
[Is there anything I was disappointed about?]
Because there is no gore, things that are too thick are not included.
For example, because the gum Tape of the image did not enter Pocket if it was intact, it was thinly crushed and bound with a needle gold.
Tool Space is the feeling that the Grip part of the image's Pliers will enter Limit.
【Hope for Manufacturer - Please let me know if you have any improvement points]
- I want a gusset on Pocket.
- It is more convenient to attach a hand like a picture.
【Have you compared items?】
- TRUSCO Tool roll
Etc
Not limited to the above, since the roll type Tool Bag is mostly of the Small Type, this product of Large Size was attractive.
[Others]
Pocket for Socket is attached, but please note that when inserting a thin tip socket such as 3 mm Hex bit from the tip, it pierces through the fabric and opens a hole.
View detail
Well it is cheap!
I am satisfied with a firm Material that is reasonable for the price. Installation Belt can also be used vertically and horizontally, so it was easy to install! Storage is double-end Wrench 10 Phillips Screwdriver Slotted screwdriver MONKEY Insulated Tape Pliers I just entered this. If it is too much, it tends to be downward with weight.
View detail
If you get confused about Tool Bag.
I am satisfied with the robustness, many of Pocket.
Because there are many kinds of Pocket, separate Pocket by tool etc. etc etc etc etc etc etc etc etc etc etc. You can choose freely how to use.
Even long Glasses I could store it without protruding if it is about 230 mm. I am using it for forest road Touring because it is tough..
The price is also Sokosoko, well known KTC so I think that those who are lost in Tool bags are buying.
View detail
Tanax Moto fizzTANAX motofizz United States
I installed it as SR400 Rear bag.
Gold Amount, shape is satisfactory. I attach it with 2 points by Belt, but SR is attached as Tie Wrap is added as insurance because the vibration is Large..
I use it as a spare plug and tool requirement.
View detail
There is no doubt.
Because it is a motorcycle with a small loading capacity, I want to carry out the necessary smallest tool limit. I think that I fully realize that thought. There is no need to raise what you want to bring out, but the place to put it is limited, so you can set a limit. That is exactly good in that sense. If the price is a bit cheaper it's 5 stars.
View detail
[Webike Monitor] It purchased from the uneasiness of in-vehicle tool. It adds to the usual in-vehicle tool, -FACOM J.161. 3 / 8PC Ratchet - Cau Ken . T type Slide-handle - Cau Ken . Offset extension bars 3/8. 50 mm.
[Webike Monitor] It purchased from the uneasiness of
in-vehicle tool.
It adds to the usual in-vehicle tool,
-FACOM J.161.
3 / 8PC Ratchet
- Cau Ken .
T type Slide-handle
- Cau Ken .
Offset extension bars 3/8.
50 mm.125 mm
- Cau Ken .
Nut grip 8-10-11・12・13・14・17・19 mm of Sockets
- SIGNET Bit-driver
- Astro products Swivel-gear-wrench 8・10・12・13・14mm
-PB 6460 in-vehicle -- business --
Vise-pliers
- Astro products Since
, such as Hexagon-wrench 4, 5, and 6
-, others, and a Cable-tie Vinyl-tape Micro-fiber-cross Motorcycle pure Bolt, are stuffed,
Although it has remarkable Volume and weight, it is surprise that a thing like this entered.
If it stuffs, it is likely to enter still more.
* -- if it does like this and sees, isn't there a thing of KTC, either?
-- it being right just, if
■ Socket Pocket is a Socket which is not large out of キツキツ
KTC although it is not like [ which is called a bad place ], but comparing Cau Ken's above-mentioned Nut grip socket with the other company -- some -- it is thicker -- it is -- as .
Since
cloth is distorted and it is bulky on the contrary, the Socket rail is put in as it is.
If the Flap which becomes
■ lid is on the whole surface, it is worrisome that carry out right in addition and tools collide.
Although it is also in the Impression of a direction besides
, it is likely to lose from a portion without a Flap.
I think that the pleasure which collects its favorite tools, and the pleasure which fixes using it are made as for
feelings. [
]
View detail
Since there was no place which stores the disk lock of vehicles, it attached to 250TR. It seems to be OK even if it puts in a heavy thing somewhat by firm structure than expected. A price is also comparatively cheap, and since it can be used so mu
Since there was no place which stores the disk lock of vehicles, it attached to 250TR.
It seems to be OK even if it puts in a heavy thing somewhat by firm structure than expected.
A price is also comparatively cheap, and since it can be used so much without using mind, it is satisfied.
View detail