Reviews
Easy to carry Helmet and Goggles!
I bought this for carrying my helmet and goggles when I participate in off-road riding such as Enduro races, and for storage when not riding.
I used to use the individual bags that came with each helmet and goggles when I purchased them, but since I need them at the same time when I use them, it is very convenient to be able to store them in one place!
The space for the helmet is large enough to accommodate the BELL moto3, SHOEI VFX-WR, and HORNET ADV shown in the image without any difficulty.
The soft material inside is also very nice because I can take it in and out without damaging it.
The space for Goggles is also large enough to hold three Goggles, and the inside is made of a soft material as well, so there is no need to worry about scratching the Lens.
When empty, it can be folded up to a surprisingly small size, so it will be useful as a bag for bringing helmets and equipment to your lodging when touring.
(I have carried only Helmet naked and dropped it on the floor many times ....)
There are certainly some CoolDesign products from other Off-roadManufacturers, but there is a sense that Race ish too much.
As an uncle Rider, I think this is the right level of ease of use for me.
View detail
I think it's good
I bought it to prevent income theft when the helmet does not fit in the top case when I am away from my motorcycle for long periods of time because I am wearing income.
The inside smelled a bit like chemical, so I sprinkled a lot of faBreeze inside and outside and let it dry in the sun before using it.
View detail
Slightly Larger
The original is in a Case. It is a little large and the material is hard. I tried to fold it into a smaller size, but it was impossible! It takes a little time to take it out of the case and to put it away. I think it will be no problem for day-touring or running around the neighborhood without luggage. View detail
Accessory Case inside the Helmet in Bixx.
This is the history of use of the Title description.
It is attached to a backpack, but I don't use it with Jet Helmet because Full face and SystemHelmet are especially loaded on the back, while Jet Helmet is likely to crack if the Shield is loaded.
It is better to buy a Bag that is compatible with the Helmet, as it needs to be Customized for Backpacks that cannot be attached.
I always use the BIXK as an Accessory Case, and in case of emergency, I use it as a Rear Carrier, taking advantage of its waterproof feature.
If you Custom it a little and use a netting together with the top, it will not fall off.
It can also be folded up like a shopping bag so it is not bulky, so you can always have it in your backpack.
However, since this is a product for helmet, it is safer to consider the load capacity.
View detail
With SHOEI GT-Air2
I bought the Cover because I didn't want to leave my Helmet bare on the Motorcycle when I was on the road.
SHOEI GT-Air2 is put in.
View detail
In addition to Helmet
Installation requires rings attached to backpacks, etc., but can be compensated for by DIY by buying parts at 100-yen stores.
Purchasing Background
To bring Helmet back and carry it when using a single vehicle (CB250) or when sending it in for repair due to malfunction.
The volume is not shown on the product page, but there is plenty of room for a NORMAL (M) size full face, so even with gloves and shieldWater-repellent spray, there is still room to spare.
However, due to the weight capacity, it may not be advisable to include simple tools.
I carried the full face in the backpack, but even though the backpack is scanty, the helmet is big enough in the back, so you need to be careful when passing people in a narrow store, etc.
View detail
Wound prevention & rain protection
I was looking for a bag to prevent Wound when hung on Holder and found this product, which also provides rain protection, and purchased it immediately.
I am satisfied that the raised interior plays a sufficient role in preventing Wound, which was the original purpose of the product.
In addition, I am very happy with the rain protection, as very little rainwater comes in.
View detail
I love this helmet bag!
I love these helmet bags! I had 3 of them but then all our dirt bikes gear and accessories were stolen so I'm simply trying to replace what I already had.I recently bought a different bag and fount it really frustrating that my expensive helmet came with such a cheap bag. This bag fit my large helmet perfectly and has a soft inner lining and quality zipper. I would recommend this. View detail
I purchased peace of mind.
What made you decide to buy?
The Portable Helmet Cover was one of the products I had wanted for a long time. The reason I wanted it was not to protect my helmet in the rain, but to prevent the theft of income etc. attached to the helmet. When I park my car for a long time at a destination, even though my helmet is locked in the Helmet lock, the Incomeetc. attached to the Others parts are not. (Incomeetc.) will not lock. Incomeetc., can be removed in a short time for those who know what they are doing. The world these days is Protect yourself." In these days of Thefts and sudden rains on the road (Not Completely Waterproof) It is a Portable Helmet Cover that protects your Large Helmet with a little peace of mind.
How was your experience with it?
The lining is made of a soft, brushed material that protects the large helmet from scratches and other damage. The Portable Helmet Cover can be turned inside out and carefully folded into a compact storage bag. Tanax purchased at the same time:Even when stored in the ShellSeat bag, the storage space still had plenty of room to spare.
[Others]
Be careful not to drop the helmet when inserting the helmet's D-ring through the hole for the D-ring on the Portable Helmet Cover. Besides that, it is not Completely Waterproof. If there is a lot of rainfall, it seems that rain will soak into the inside of the helmet.
View detail
helmet storage
I think it's a must-have for those who don't.
For those who hang expensive helmets outdoors.. Easily protects them from bird droppings, dust, and scratches. Since it is thin, it can be easily stored in a bag, and it is very light and durable.
Easy to install and very satisfied overall.
I think it's a must-have item for riders.
For those who hang expensive helmets outdoors... It easily protects against bird droppings, dust, and scratches. It's thin, so you can store it lightly in your bag and it feels very light and tough. ------------------------------------------------------------ -------- I think it's a necessity for those who are Molba.
Those who walk outdoors outdoors. Easy protection from bird shit, dust, and scratches. The thickness is also thin, so you can keep it lightly in your bag and feel very light and tough.
It is easy to mount and is very satisfied as a whole.
I Think It's a be a guest-have item for riders.
for Those Who Hang Expensive Helmets Outdoors ... It Easily Protects Against Bird Droppings, Dust, and Scratches. It's thin, so you can store it lightly in your bag and it feel very light and tog. Powered by Google Translator
View detail
Convenient
It can be used exclusively for Touring, or it is useful for storing Helmet.
It is a soft fabric that does not easily get Wound on the helmet, so it will not damage the paint.
View detail
For scratch prevention.
I bought this to protect my helmet from scratches and dirt. I'm glad I bought it because it works well in sudden rain. View detail
It's convenient when you carry the Helmet in your car
This one was presented by FreeGift when I made a bomb purchase by the personal import, because I finally got a mini-truck recently and came to be able to carry wR450F by car, Boots, Helmet, Jersey, PantsProtector and the equipment were put in the passenger seat. If you put Boots in a bag and Helmet in a bag, you can prevent scratches and stains on the equipment, and it is easy and convenient to carry! View detail
To protect the helmet.
I bought this for protection since I bought a new Helmet.
I decided to buy this product because it is reasonably priced, does not have a flashy logo, and will not scratch the helmet easily because it is lined.
The helmet is a YJ-21 ZENITH and the size is XL, so the aperture is not completely squeezed out, so it would have been nice if the bag was a bit larger.
The Large part fits and you can see the top of the head a little, so I think it's Large strong, but that's the only Minus point.
View detail
Products that need attention
I bought it because it was a compact, well-designed product and it was Tegner, and I trusted it in its own way.
It may have been a poorly sewn individual at the base, but it was not used 10 times (and that was a short time).
I had to drop my new Helmet, which I had taken care not to drop.
If you look closely, the stitching on the NylonTape is short.
If you have one, you should inspect it carefully to make sure it is not beginning to fray.
View detail
I use it for storage.
It is used for storing a Helmet for Touring only, but it is a soft material that does not damage the paint and prevents Dust from sticking to it. If you use the attached Belt, it is convenient because it can also be a Shoulder. View detail
Just size to Z-7
I already have a folding bag (product name:Eco Banana, image Left) that can fit a helmet from the company, and I like the fact that it is more specialized for a helmet and can be folded into a compact bag, so I bought this one.
Made of stretch material, this bag is flexible and easy to tuck into a corner of the bag, and the Shoulder Belt is more comfortable than the cloth bag that comes with the Helmet, without the thin strap that can dig into your shoulder.
When actually inserting the Helmet, close the Fastener about 1/3 of the way beforehand, and then insert the tip of the chin before putting the Quantity:Pair (for Left and Right) It's easy to pull and wrap the fabric of the The capacity is good enough for Z-7, and if it's a bit bigger than this and doesn't have any protrusions, you can still get in somehow, but I think something like X-14 might be tougher on fabric.
View detail
That's a good one
When you stop by a museum, stroll around the town, or just wander around, or when you're carrying your luggage to your hotel, you can see the difference between the two It's quite annoying to carry around a Helmet
I was looking for something I could use in those cases and found this The fabric is Helmet-friendly material, even if it's Pocketable. I'm a Jet helmet and Goggles, so I've been using it with my Goggles and Gloves I'm using a Jet helmet and Goggles, so I decided to pack my Goggles and Gloves with it There is plenty of room for it to be stored even if it is plunged in If you wear it diagonally with the attached belt, you can put it on the upper side (called the bottom in the product information) in that state The small Pocket is also good for storing small things
View detail
It works well enough
I have a helmet (SHOEI GT-Air II) that goes into the NMAX helmet in When I was out and about, I was hanging it on my KIJIMA Helmet Lock I was worried about rain and scratches, so I was looking for a waterproof helmet cover and found this one I bought it because it looked better than similar products from other companies in the reviews
Try it out
? Brushed interior material is effective in preventing scratches
? It's got to be able to withstand a certain amount of rain
Covering the Helmet makes it less noticeable
? Easy to store in a storage bag, so-so small
And it worked well enough for my use
View detail
Good design and portability
I bought it to carry the Helmet to driving school etc
When you flip the Porch over, the Bag unfolds, and the Porch that is turned over remains attached to the bottom of the Bag It will be stored so you don't have to worry about losing it
It's nice to have a wide padded cloth to prevent scratching with Fastener
The helmet I used is ICON AIRFLIT with a Spoiler on the back of the head, so it's a good idea to use it It fit a little tighter
A normal Full face with no protrusions will fit without a problem
It's a very good product that shows a lot of care and attention to detail
View detail