Reviews
Silhouette is good, I am satisfied.
The stretch is good, and the fit is good, so I am satisfied with the silhouette and other features. View detail
I hemmed it to fit me.
After purchase, the hem was too long, so I hemmed it.
The cost was 1,500 yen for a 7 cm raise.
I think it is a very Fit and good product if it is adapted to each Size.
The knee pad is also adjustable, so hemming is not a problem.
View detail
I like that the knee pad can be taken in and out from the outside.
[How is it used?
Short distance touring on a sports type motorbike
Was the one you received as per Image?
The standard knee pad is a bit bulky and looks a bit like a knee pad when you get off the Motorcycle. "I feel like I'm in it." I put in a soft pad for the same Honda Cargo Pants and it looks good.
How was your experience with it?
The pad position can be adjusted with Velcro, but the corners of the Velcro hit my knees and sting. It would be better to adjust the pad so that it does not touch the knee, or to cut the corners round.
[Points to note]
Immediately upon arrival, it smells like Chemical, or an old warehouse.
I washed it twice and it was much better.
The zipper opening is shorter than that of regular Jeans, so some people may have trouble taking it out with a Toilet…
How did it compare to other products?
I like the fact that the knees are not bellows-like, so it doesn't look like it's for Motorcycle at a glance.
Off the Motorcycle, the Knee Pad can also be taken out quickly and conveniently.
View detail
Does it take a lot of energy to wear it? (In many ways, yes.)
Was the one you received as per Image?
I thought the color would be a bit darker, but it was a normal Blue. The characteristic diagonal cut from the waist to the knee stands out more than expected.
[How did you feel about the Fit?
I wear 29 or 30 in Lee Vise and GAPDenim, but I chose 32 after wondering about 30 based on the actual measurement data, and it was a little loose. I was a little bit loose. The thighs and under the knees are also loose, so considering the fact that it is a stretch denim, I might have been happy with 30. When I tried on a model called "Cafe racer" before, I had no problem with 30 (but I didn't wear the waist protector), but I heard that each model has a different size feel.
How was your experience with it?
The inverted U-shaped turnaround in the buttocks area was a bit rough at the beginning of the ride, but I got used to it.
The Protector on the knee is too low in the de-fault position, but the Velcro can be used to adjust the position, so there is no problem.
The front of the button fly is a little difficult to fasten due to the seam and button position.
The CE-certified Protector comes standard not only on the knees but also on the hips for added peace of mind.
[Was there anything that disappointed you?
While it is secure, the 12.5ozDenim and ImpactZone are triple-layered with Twaron's Seat and lining, making it quite stiff. There are also a lot of seams, so it feels heavy to wear. They're wearing Large layer stuff." Denim is not so easygoing.
What are the specs of the product, such as protector?
A CE-certified Protector with Velcro positioning on the knee comes standard. The fastener on the outside makes it easy to attach. A CE-certified protector can be placed in the pocket on the waist, and the protector is also included. The waist and knees are reinforced with Twaron, an Aramid-based material, to prevent easy tearing.
How did it compare to other products?
I have never seen a RidingDenim with such a high protection performance and design, so I compared it with other PMJ models. I was torn between the Deus model and the Dallas model, but I thought the Deus design was too simple and lacking in white, so I went with the Dallas model. I would recommend Deus if you consider the comfort of the garment.
View detail
![MONKEYComboWork pants[DenimXBEIGE]](https://img.webike-cdn.net/catalogue/images/60161/201903180055_TS.jpg)
A slightly different color scheme
The design looks eccentric, but when you try them on and match them with the Jacket, they are normal.
The legs look longer, perhaps as a side effect of the design.
View detail
I love the VINTAGE feel!
I bought this for riding YamahaBRONCO which I customized in Vintage off-roader style.
Various brands have been selling off-road denim pants with a vintage feel, but most of them have not been lined up in thicker sizes, perhaps because they prioritize stylishness.
There were many fat OffLoaders in the United States in the 70's and 80's, and as someone who admired the rough &tough style of the Denim pants they wore, I am very pleased to see the lineup of fat sizes in this product!
The design also incorporates the inertia of the time, while the inner protector is also solid and provides a very high sense of security when riding.
It would be very suitable for a scene like an endless Dirt forest road covered with dust and sand.
You can also enjoy wearing it with Off-roadJersey and Nell Shirt, which have a similar VINTAGE feel.
View detail
![RigidDenim[RIGID DENIM]](https://img.webike-cdn.net/catalogue/images/80719/RDB1004a_TS.jpg)
Point of purchase is that it looks durable and rain proof.
Was the one you received as per Image?
As per Image, but I would have liked to see more variety in the Manufacturer transfer sample photos.
[How did you feel about the Fit?
Waist is a little loose but acceptable. I appreciate that there are multiple hem lengths. The Waist is a little loose but acceptable. However, due to the Knee Pad, there is not much room from the knees down, and it feels a little snaggy when taking it off. It's not enough to bother me.
How was your experience with it?
I don't want to test the performance of Gebhler, but I feel secure. 13Ons, I was surprised at the weight at first. waterproof is also a comfort for touring. However, it is not so good in the city center in midsummer. I bought this for summer touring in Hokkaido.
[Was there anything that disappointed you?
Not particularly
What are the specs of the product, such as protector?
It is located around the knees and hips.
How did it compare to other products?
I was worried about Komine, Power age, and PMJ, but as I mentioned earlier, in addition to the durability of Kevlar, etc., waterproofness, price, and the variety of hem lengths were the purchasing points.
I guess it is not well known because there are not many reviews. I just bought it, so I am not sure how durable it will be, but I am satisfied with it.
A few more Waist Size varieties would be more appreciated.
View detail
I knew it was Size!
I bought the Honda Cotton Cargo Pants in a medium size (thinking there is no way I am a small size) and they were loose, so I bought these in a medium without hesitation, but they are tight around the belly (I have a skinny butt and thighs as I age). I bought this one in a medium and it was loose.) I've already cut my tag, and I feel that a size larger would be too loose, so I'll try my best to wear it. The fabric from the thighs down is quite stretchy, but the belly area is reinforced, so I don't think it will stretch too much. The fabric is a chewy mesh + lining (familiar from Jacket) as shown in the image. The buttocks and the inner part under the knees are made of Denim fabric to prevent perspiration and heat. View detail
fashion-conscious
It is cool to wear Denim for winter Riding.
They are functional winter denim pants, so they are windproof and not cold.
The Protector is also attached to the hips and knees, making it a good and safe product.
View detail
When in doubt, choose the Large size.
These are denim pants from PMJ, a motorcycle denim brand that has been getting hot lately.
Denim has a strong image as a fabric, but when it comes to motorcycle use, you can't say that.
I've had falls with non-motorcycle Denim and Cargo Pants, both of which had flamboyant holes and abrasions.
It is a very painful experience.
In this regard, this is a special fabric woven with a special fiber called Twaron, which is only for motorcycles.
I haven't tried it myself, but it is CE StandardAAA certified, which means it passes the highest rank standard for general riding use.
Some PMJs have three layers of lining/toilet/denim, but this one has one layer of fabric with the toilet woven into the denim.
It is not partially reinforced with Twaron, but the entire surface is reinforced, which gives a sense of security and is similar to the general Denim feel.
(There is a mesh lining on the front side for Protector.)
It also has Protectors on the knees/hips.
The advantage is the silhouette of ItalyDenim.
It also proudly bears the Made in ItalyTag.
If you remove the Protector, the silhouette can be used as a denim for everyday wear, and even with the Protector on, it doesn't make much of a statement.
(Not that I don't understand it at all.)
The most important thing to consider when purchasing is the size of the product.
Waist is set to be quite Tight.
I wear Levis 501s in 32-inches with some room to spare, but when I wore this product on top of a thick inner, it was just the right size, maybe a little smaller in 34-inches. It was just the right size.
For more information on size, please refer to the homepage of JAPEX.
HP→https://www.japex.net/pmj/#lineup
In addition, at the time of posting this review, there is no webike handling, but JMODEL is a size for ~172cm. (In short, it's a short spec.). is now in the lineup.
I am 172cm tall with slightly short legs, and the length of this JMODEL was JUST right.
It is also possible to roll-up or hem the garment even if it is too long, but it is necessary to allow for the fact that the position of the knee protector will not match and the original silhouette of the tapered hem will be lost.
In addition, the reverse side is yellow because of the woven Twaron, so the folded part becomes yellow when rolled up.
Anyway, it's a very cool Motorcycle Denim.
I think it would be wonderful if more products like this were made available and the choices expanded.
View detail
![GORE-TAX [Gore-Tex] Denim pants GSM23101](https://img.webike-cdn.net/catalogue/images/101448/24606371_1_TS.jpg)
easy to move
Draping is well made, and when straddling the Motorcycle under Seat 880~, it is easy to raise the legs without any particular sticking.
It's a cotton exhaust pipe, so I don't have to worry about it melting with the Up type exhaust pipe.
(I bought this product because another Gore-TexPants melted and ripped in the same condition)
I'm a little concerned about the durability of Seam tape.
If you want to use it in the winter, you have to take measures with Inner.
View detail
A must see for Honda fans Jeans!
Was the one you received as per Image?
The product was no different than the product picture.
As you can see in the product image, it is cool to have a big embroidery of HondaLogo on the hip pocket.
Overall Coloring is no different from the picture.
[How did you feel about the Fit?
In my body type, it was a little large in M Size, but I do not mind.
The hem is long, but there is no problem with Roll-up one roll, and it seems to be good even if I do not bother hemming.
How was your experience with it?
The CEProtector is included as standard, so it's a great Jeans for touring. Because the fabric is also strong, durability seems to be good. There seems to be no problem even with normal washing.
The fabric is thick, so it may be hot for daily use or in summer.
It's perfect for when it's a little chilly.
[Was there anything that disappointed you?
The Pocket is made of polyester mesh, so if you put sharp objects or keys in it, it might get caught when you take it out.
What are the specs of the product, such as protector?
The Knee Pad is built into the knee and cannot be removed.
It is quite thick and reliable.
How did it compare to other products?
The design is extremely simple compared to others, but the price is reasonable, so it helps.
View detail
Lightweight, Waterproof, Windproof
I was looking for Rain Wear, but I started to think that I don't ride when it's raining, and I arrived at this while looking for a wear for use that I can rush through when it rains on the road.
They are sewn with a gunny crotch so your knees won't stick out when riding or straddling compared to regular denim pants. If you raise the hem of the pants about 4cm above your normal jeans, your ankles will be hidden and will not slide up.
I don't have any experience with riding wear bottoms other than a leather suit and off jersey, but when riding a motorcycle, it's easier to use something made for that.
View detail
Size feelingLarge fineness
170cm, 58kg, slim build.
Before purchasing here, I went to a certain Motorcycle shop with the intention of purchasing, but they didn't have the VintageNavy color that I wanted in stock and they had Black, so I tried on the M Size and it was too big for me, so I tried on the S Size. But the Hem under the foot was about Limit rubbing on the floor in the state of bending the knee astride the motorcycle would be just right, and if I put on riding shoes, it would be like I was on top of the shoes and there would be no rubbing on the ground. I thought I would buy Black and go home, but in the end I went home without buying
I bought the color VintageNavy that I wanted from webike! 。 In mid-October, I left my house after 7:00 a.m. on a business trip and drove on the highway for about 30 minutes in temperatures below 15 degrees, but I didn't feel cold at all!
I think it was over 20 degrees around noon, but of course it was not a problem while I was riding my motorcycle, it was just a little hot when I stopped. It was about the same. I think that it can be used except for the summer.
As I expected, the longer hems are also great when riding a motorcycle with bent knees.
But still, I was trying it on and Yo Cutter!
By the way, Design is DEGNER and Made in Pakis Tan
The price of this and a certain Motorcycle shop was exactly the same.
View detail
![GORE-TAX [Gore-Tex] Denim pants GSM23101](https://global.webike-cdn.net/photo/impression/23/23b00e7efbb65b26c01770ded1c40a41L.jpg)
Expensive denim pants
Was the one you received as per Image? It was Slim than I saw in the catalogue. I think that the lining is Seam tape, and Sea Ring processing is done, and it becomes a windproof measure from autumn to winter. It will be too hot to wear in summer because there is no place for wind to escape. There are no pockets on the front or back to prevent scratches on the motorcycle.
[How did you feel about the Fit? The Draping makes it easy to move around in the riding position.
How was your experience with it? The comfort is the same as regular Denim, but I think it is just right for the coming season. The pocket in the back is a batch pocket, and one corner is fastened, so it is difficult to put things in, and it is limited.
[Was there anything that disappointed you? No Waist Pad. It's a shame that they don't have a waist protector on the Denim, because it's a great Denim, and there is no information on how to wash the GORE-TEX Denim. If the Seal tape comes off in 2 or 3 years, I can't cry!
What are the specs of the product, such as protector? The Air Thru Protector is easy to remove from the knee zipper, and I think the CEProtector can also be installed.
How did it compare to other products? GORE-TECS Denim pants not available from other manufacturers
Other items that would be helpful
Deciding factor of purchase/Existence of Included Parts:/ Attention/Opinion to Manufacturer
View detail
Kojima Jeans
I bought this for work.
It is 15 OZ but can be worn without feeling Solidly fabric.
Since it is one wash, there is not that much shrinkage, and I think it is Large sturdy even if you decide on Inch, which is what I usually wear.
If you are concerned about puckering at the hem or damage due to shoe rubbing, I think it will last longer if you finish it with a four-fold.
The hidden Rivet is also securely attached, and we look forward to seeing how it will change over time.
View detail
![Armor LightJeans [StraightFit].](https://global.webike-cdn.net/photo/impression/00/003552bd57a7f36648f613b317be36d4L.jpg)
It is indeed different from Lee Vise.
I wear 32-inches on a daily basis, but when I tried them on, the Protector at the waist was quite thick, so I went with the 34-inches; I wish there was a 33-inches setting.
At first when I walked, the Protector on my knee felt quite uncomfortable, but after wearing it for half a day, I became quite familiar with it.
It's very hot in the middle of summer, when I'm riding my motorcycle it's still good, but when I walk it gets very hot and stuffy.
Compared to Jeans with Protector from other companies, it is quite sturdy and has a high sense of safety, but it does not have the comfort of Lee Vise as expected.
I think the best thing about Protector is that it's not noticeable.
View detail
![Armor LightJeans [StraightFit].](https://img.webike-cdn.net/catalogue/images/95796/stone-wash_straight_TS.jpg)
It's not a Lee Vise indeed.
The size is usually 32-inches, but I bought 34-inches. 32 was too tight because Side Protector is quite thick. 33 would be just right.
When I wore them new, I felt quite uncomfortable with the Protector on my knee when I walked, but I got used to them after wearing them for half a day.
It is hot in summer. When running, it is good, but when walking, it is hot and it steams. The ProtectorPocket of the knee was Mesh in Catalogue, but the purchased product is a thick cloth, and Protector seems to protect it more surely than Jeans with Protector of other companies.
It's not a Lee Vise by any means, but it's a good product for safety.
View detail
Good design, although regrettable in places.
I'm 165cm tall, clothing Size is XL/13 in Ladies, M in Men's, and I tend to wear 27 or 28Inch in regular (non-motorcycle) Denim.
Size・Length
I saw reviews of this product in various places and decided to go with size 30. It's a bit tight when you first wear it, but it stretches a bit when you wear it 2 or 3 times like stretch denim. it comes down when you are touring, so you can choose the tighter one.
I think this one is made in Korea, but it might be for the West, and I had to do a lot of lengthening after the product arrived. I usually wear the Inseam (inseam) 76-78cm Denim without lengthening, but I think it is quite long because I cut more than 10cm.
Nice try! Where
I think the fact that the Protector for the knee is inserted from the outside leads to the high design, but after riding the motorcycle for about an hour, the Protector comes out of the Pocket for the Protector little by little.
And the sewing of the Button hole of the Button part of the stomach was torn and separated from the fabric as soon as I started using it. I'll fix it soon, but it's too much trouble, so I'm wearing it as is.
I can't say it's a perfect 100, but it's a design that fits my motorcycle and is better than other manufacturers' designs for Casual MotoPants.
View detail
Riding Pants with a lot of potential.
The design looks like Jeans, but the leather on the inside of the thigh and calf blocks the heat from the exhaust system and engine. They are also fitted with Protectors to ensure safe delivery. View detail