Reviews
Thin Gloves for convenient maintenance
I bought these Gloves because I didn't want to get my hands dirty when doing maintenance.
I found it at Home center and bought it before. I liked it so much that I bought more for my inventory since it was also listed on Webike.
Rubber is just thin enough and strong enough. Of course, since it is thin rubber, it can tear,
This Level can be used several times for light maintenance.
It is just thin enough so that Stress is not felt that much during maintenance.
I also use them when I wash my car. My hands get cold when I wash my car in cold weather, so these gloves make it much easier.
View detail
It can be used for a variety of purposes!
[How is it used?
I purchased this product for use during routine maintenance.
How was your experience with it?
The Large size is a big help when working with rough hands.
The most significant by-product is that my hands are no longer rough when washing the car.
How did it compare to other products?
This is the first time I have bought such a product, so I cannot compare, but I will continue to use this product.
[Points to note]
Not particularly
I usually use M size gloves for Motorcycle. It fits perfectly.
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
Easy to use and tear resistant
[How is it used?
I purchased this product to use for Custom, Cleaning and Restoreetc. of Motorcycle.
I have often worked without gloves in the past, but I decided to use them because the roughness of my hands and oil stains caused by the chemicals in parts cleaneretc. were getting worse.
How was your experience with it?
My impression after using it is that I wonder why I did not use it earlier.
Since these are work gloves, they are highly chemical-resistant and tear-resistant, so they protect your hands well.
I have also had my hand caught on the Gold genus and cut myself while working, but these Gloves protect me.
How did it compare to other products?
I compared this product with other Gloves and found it to be the most cost-effective because of its low price and quantity.
[Points to note]
Not particularly
View detail
Easy to work with details
[How is it used?
I use it for daily Motorcycle maintenance.
Was the one you received as per Image?
Yes
How was your experience with it?
I used to always use military gloves for maintenance, but once I used them, I couldn't stop because of their workability.
I sometimes fiddle with my phone during maintenance to view PDF manuals, but I can operate it while wearing this product, so it is convenient for Large change.
The size is the same as regular gloves, and the M size was just right for me.
Although there is no surface treatment such as conspicuous protrusions to prevent slipping, I did not feel any defects because I could work without slipping even with some oil on the surface.
The only Advantage of the military gloves is that they can be used to wipe dirt on small parts with the fingertips, but I think this product, which is superior in workability, is more convenient by several orders of magnitude.
View detail
Cospa strongest
[How is it used?
I use this product when I do maintenance such as changing oil.
Was the one you received as per Image?
For some reason, there were two for the Right hand in the package. I don't have any problem since I only use it with one hand, but I wonder if this is the way the product was originally made.
How was your experience with it?
It is perfect! I was very happy that my hands were clean and less rough.
[Points to note]
Nothing in particular.Right handQuantity:2pc. It may be for Set, so just be careful there.
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Not only for maintenance, but also for car wash.
I don't do much maintenance myself, but when I touch it from time to time, I tend to make scratches on my fingertips if the work is unfamiliar to me, so I bought this to prevent injury.
I think it is good to have something like this to reduce stress because it does not make my hands sticky during grease-up work, which reduces the need to clean up after work and wash my hands.
When washing a car, it is easy to get hurt by sharp edges of Tie Wrap when polishing or wiping intricate areas, but with this, such risks can be reduced and safety can be assured.
I usually use S Size Mechanics Gloves and this product was Exactly in M Size.
We hope this will be helpful to buyers in their choice of Size.
View detail
Satisfied with durability and ease of use
My previous Gloves were thin and not very durable, but I am happy with these.
It is non-slip, inexpensive, easy to use, and ideal for maintenance.
View detail
work gloves
I purchased these gloves for maintenance work on my motorcycle. They are ordinary gloves, but they are indispensable for the work. View detail
Just right for light work
I use this for carrying packages and other tasks where I don't want to get my hands dirty. It is inexpensive and just right for adjusting shipping costs. View detail
The thick fabric is quite durable.
[How is it used?
I use it for cleaning other than Motorcycle tinkering.
It is very helpful because I have very rough hands.
Nitrile gloves have been in short supply in the medical field recently, so I was glad to get them.
How was your experience with it?
The fabric is thick, but just thick enough not to affect fine work.
It is very easy to use as it has a non-slip surface.
The price is high, but it is durable and can be used for a long time.
View detail
I was charged the full amount even though I was fully Pointed.
I was charged the full amount.
Even though it's a Point payment.
View detail
For Motorcycle Maintenance
I don't use them for really fine work, but I do use them for oil changes, grease up etc. The durability is much better than thin nitrile gloves. I think they are made to be a bit large, so if you are looking for a tight fit, you might want to go one size smaller than your usual gloves. View detail
It was just the right Size for my published height and weight.
Recently, Nitrile rubber gloves have become more expensive, so I bought 4 pairs of this product for about 100 yen.
On the occasion of the purchase, it is the translation which referred to the Impression published here, but if it is the person of my height and weight (normal body shape), it is just about good in L Size.
You can have a little more room, but if it is too large, it will be difficult to work, so it is better to choose ExactlySize.
The video is Carburetor overhaul scenery.
View detail
It's better than I thought it would be
I bought these gloves as work gloves when repairing Cowl with FRP.
I was looking for a pair of work gloves because the thin disposable gloves tear easily and I found this product.
The deciding factor in the purchase
The fact that it was inexpensive and came with Impressions that weren't bad was the deciding factor in my purchase.
I could have bought it at 100 yen shop or Home centeretc., but I bought it along with FRP RepairKit and purchase.
Impressions of use
I thought it was very easy to use while being inexpensive, about 100 yen.
It doesn't tear or ruin quickly and is well made.
It's difficult to do detailed work like using fingertips, but it works well enough for me because I don't have to do that kind of work in FRP Repair.
If you don't get it wet, there is enough grip power by two TolylRubber in the palm of your hand, so it is hard to drop and safe when you have heavy things.
Size Sensation
I am 174cm tall and have long fingers for my height, but the L Size was just right.
I think it's just the same Size as the gloves etc. that I usually use.
【Review】
The price is also the price, so I was thinking of using it up only once, but I think I can use it for a while.
I'll be using it for Motorcycle maintenance and small jobs in the future.
View detail
just as I thought
The thing was as expected and perfect for playing around with Motorcycles in the cold weather.
The only thing is that the delivery was subcontracted by Yu-Pack and the box smelled like cigarettes.
Is the car full of smoke?
I've got a cough that won't stop.
I'm not exaggerating, but I literally closed my mouth because it smelled so bad at Level that it made me sick!
View detail
It's slippery.
It was cheap, so I bought it along with another product.
The good thing is that there are a lot of Vinyl parts and Oils and such don't stain your hands.
However, the Vinyl part of it slipped too much, and it was Large strange to proceed with the work.
If there's any operation where these gloves come to life at Pinpoint...
View detail
stubborn
The fit feeling is also good, and it is Large sturdy even if it handles Gasoline and oils and fats, etc. I use it in various hard ways, but there is not even a sign of tearing if I use it once. This Gloves is recommended if you want sturdy and durable. View detail
Maintenance essentials!
It's a necessity for maintenance. There are a lot of similar products in the market, but this one was in stock and the price was low enough for me to choose it. If you install them tightly, your fingertips will feel as good as when you don't have Gloves on. Recommendation.
But when I sweat, the inside of the glove becomes soaked because there is no breathability. This is unpleasant, but it is better than the hand becoming pure black, so it is patient.
View detail
It's okay
The Fit feeling of the finger tip is not good, and the detailed work such as catching Screw may be hard. The non-slip part seems to be strongly attached. Because it is cheap, it is such a thing. View detail
When building the Engine
It is useful for assembling the Engine, and it is also useful for assembling your fingers on the Edge surface of the Crankcase and the Pin angle because you don't have to be afraid to cut
I wear blue Nitrile gloves under these gloves to keep my hands clean
Of course, unlike ordinary gloves, the fibers are made of Delicate Oils, which do not fluff up You don't have to leave it on line or anything I don't think anyone does it with a military hand, but it's useful if you have something other than Engine
When used with bare hands, oil stains from the backside &sweat due to Rubber's coating Nitrile underneath is my go-to because it stinks
View detail