Reviews
somewhat thick
As Inner Gloves are slightly thicker, they are warmer.
However, if you put on thick gloves that are too tight, the fingertips will be compressed, and the fingertips will be cold. 。
Consult with the Gloves you have on hand.
View detail
Warm but thick
Was the one you received as per Image?
When I was heading for touring around Urabandai at the end of October, I was wondering what I should do since 3SeasonGloves are too cold, but I don't have Winter Gloves, and I can't put a Handlebar Cover because I'm not a CUB.
I thought to myself, "Shut up and buy Winter Gloves," but I didn't have any Gold, so I tried a bad idea with these WIN de BlockInner Gloves.
[How did you feel about the Fit?
From other users' impressions, it seems that I have large hands, so I chose the M size, one size smaller than usual. I think it is a good idea to buy a smallest size, because the operability of the inner gloves will be significantly reduced if you do not choose the smallest size due to the characteristics of inner gloves.
How was your experience with it?
Again, as I knew from other people's impressions, it is quite thick. It was about twice as thick as I imagined.
I was able to fit LimitGloves inside, but I had to take them off because the fingers were hard to bend and the grips were hard to grip.
[Was there anything that disappointed you?
I guess it's the thickness. I didn't expect it to be this thick. Because of this, it is better to check Gloves in person.
What are the specs of the product, such as protector?
None in particular. But I think it will improve protect performance a little.
How did it compare to other products?
I will look for something a little thinner.
Other items that would be helpful
Deciding Factors for Purchase/Included Parts:Presence or non-existence of Included Parts/Points to Note/Opinions and Requests to the Manufacturer
The warmth was quite good, so it would be great if you could make Inner Gloves half as thick as these.
View detail
It's warm, but...
It is thick for an Inner. It would be better if it were thinner. View detail
The raised fur inside is warm!
The inside of the inner gloves is brushed, so they feel nice and warm to the touch. It may be a bit of an exaggeration to say that it is like putting your hand in a blanket, but it is very close to that feeling.
I have the impression that the size is a bit on the large side. I usually choose a large size, and I chose the same size as usual this time, but it might have been better to choose one size smaller if I thought I could wear normal gloves on top of it.
As for the Gloves, we used them with Kadoya's C-NINEGloves.
It is slightly LongCaph, so it covers up to the wrists. I appreciate that it also protects me from drafts from the sleeves.
View detail
It feels slightly warm….
It is comfortable to wear. It is up to the wrist and warm.
The thinness of the product does not interfere with Gloves and does not hinder its operation.
It is tough in the middle of winter, but it can be used in the early fall.
By the way, it was 19.5cm from wrist to middle finger, Exactly in L size.
View detail
To combat the cold.
I bought it to protect myself from the cold.
The fingertips are coated with Urethane, which helps prevent wind.
I usually wear L size gloves, and this Inner Gloves is the same size and the fit is just right.
However, in the extreme cold, it seems a bit unreliable.
My personal impression is that spring and autumn are the best times for this.
View detail
Inner Gloves
It is very comfortable and cool to the touch. Because it is in normal Gloves, practically, I think that it is hot, but now in the middle of June, I think that it is suitable. Also, the vibration of Handlebar, if it is held down a little (It's a double layer, so it's not surprising…) View detail
Warm?
I think it's warm.
I think it can be used well in the winter.
View detail
Generally good.
I used to use ThermoTron of Thailand, but touched the Surface Fastener, because the fluff became worse, new.
The feel of the skin is rather stiff.
Like Thailand Chi, it doesn't get dramatically warmer.
I'm a costumer.
View detail
It is useless even in the Tokai region
Honda OEM's Grip heater is attached to PCX, but I am suffering from coldness of my fingertips.
Make 15000 yen, Honda GORE-TEXProtection Gloves also has no effect.
So I decided to try using Inner Gloves.
Result has no effect. The movement of the finger only deteriorates, the coldness of the fingertip can not be improved.
After all it seems that Handlebar Warmer is good.
However, because it attaches to Dorakko, I added Bracket to Mirror, so I can not attach Handlebar Warmer.
View detail
It is easy to fit
Purchase stock disposal items.
I do not like the wrist part so much that it is not a Tight feeling, I can attach and detach it with a spoop.
Anyway, I will put Gloves on top of this.
However, whether it is possible to find value by making it made of Honda.
If you choose another manufacturer, you should find cheaper ones with similar performance.
If you think that price is also part of performance, you may call it halfway.
On the contrary, sewing is solid for price and it seems durability, so I think that it is a product that can be best buy.
View detail
If you would like to use the Glove of a Leather too when it is comfortable if the Glove of a Mesh is used when using a Glove for summer, but running a long distance, but it becomes intense heat, I do not want to use a Leather just for a moment..Since it c
If you would like to use the Glove of a Leather too when it is comfortable if the Glove of a Mesh is used when using a Glove for summer, but running a long distance, but it becomes intense heat, I do not want to use a Leather just for a moment..Since it compares when it is not sticky since sweat will be effectively inhaled if
, however this are used, and not using heat, either, or it becomes and it becomes Massey, it is found useful.
View detail