Reviews
For WORKMAN's Jacket.
It is a little too Large for WORKMAN's Mesh jacket, but this is not a problem as it can be easily cut with Scissors.
Of course, I think it can be attached to RoughAndRoad's Jacket with no problem, but I don't know because I don't have it.
View detail
Added to Rough Parka for a little ride.
It is additionally attached to Rough Parka RR7234.
I think Rough&Road's Jacket would have Standard Equipment or Mounted Space.
The shape of the place where the Parts to be protected (back, shoulders, elbows, chest) are placed is the same.
See Catalogue for details.
I used to share Hard Type RR10074 with RR7001 Gore-TexTrekJacket.
I purchased an addition to my Parka for street riding.
The protection is 4 stars compared to RR10074.
Compared to a full-scale product, the Level is better than nothing.
View detail
It was Exactly in workman's Mesh jacket!
It was Exactly in workman's 2023MODEL mesh jacket.
Large Variety Satisfaction
View detail
I attached it to a Mesh jacket from Kuhl Lace Miss.
I attached it to a Mesh jacket from Kuhl Lace Miss.
Cutting is required, but can be easily done with scissors.
Although the protection is better than nothing, it is not as good as nothing at all.
View detail
Plus peace of mind.
Purchased this for a Mesh jacket of the same Brand. It protects not only the upper part of the chest but also the whole chest, so I feel more secure. I was a little worried because the price was so low, but when I saw the product in the mail, I thought it was surprisingly well made and would be sufficient. It fits the jacket perfectly and is easy to put on. View detail
Purchased for insurance purposes in case of emergency
[How is it used?
Purchased for Summer jacket from Laflo
Was the one you received as per Image?
Yes
How was your experience with it?
Not as sturdy as Hard Type, but installed for insurance purposes.
[Points to note]
It is soft, so some people may feel uneasy.
In that case, you might want to buy a Hard Type Chest pad.
How did it compare to other products?
I only have OEM.
If you plan to purchase Protector later, you may want to purchase a full Protector jacket from Raflo.
View detail
Thin, lightweight, and inexpensive
[How is it used?
I purchased the soft protector for touring, winding, and highway use because I thought the original soft protector would not be safe enough.
Was the one you received as per Image?
It was just like the Image as shown in the product picture and Review.
How was your experience with it?
It is thin, and the fit is good because it is bent to follow the ribs. The weight does not bother you once you put on the Jacket.
[Points to note]
Note that this is not CE Standard compliant, so be careful if you care about it.
How did it compare to other products?
The plastic part is quite perePera, so the actual defense performance may be a little inferior.
【Review】
Considering the defensive performance that seems to be sufficient at the public road level, the lightweight and thin fit among hard protectors, and the price, I think the cost performance is quite good.
View detail
Used for the company's Full mesh jacket.
I thought it was just a thin plastic board attached to a thin cushion material in order not to destroy the silhouette of the Jacket, but it is a three-dimensional structure that fits the ribs, so the fit is good, and since it is a separate type, it cannot protect the center portion such as the solar plexus, but it seems to protect the ribs on the sides. It is a separate type, so it does not protect the center part of the ribs, but I feel that it protects the ribs on the sides as much as I put it on. View detail
This could be good!
I purchased this product to attach to Workman's Mesh jacket.
The installation was smooth and the fit is good.
I thought it would be better if it were a little thicker,
Considering the price, I guess this is about the same.
I think it was a good purchase.
View detail
Good
The company's Mesh jacket (RR7308A) and purchased this product because the chest Protector was an Option.
Jacket was ExactlySized, so this Protector was installed.
I wondered if it would be tight. I thought it might be too tight, but it is not that thick and comfortable to wear.
It is lightweight and appears to be strong.
View detail
It's out of position.
Was the one you received as per Image?
Quite different and thinner than it looks.
[How did you feel about the Fit?
Fit feeling is not bad, but something is missing.
How was your experience with it?
Stronger than nothing.
[Was there anything that disappointed you?
I'd like to see a little more protection closer to the collarbone.
What are the specs of the product, such as protector?
It is hard material but does not protect the area near the collarbone. The thickness is also thin.
How did it compare to other products?
Personally, I can't use it.
Other items that would be helpful
Deciding Factors for Purchase/Included Parts:Presence or non-existence of Included Parts/Points to Note/Opinions and Requests to the Manufacturer
General review
It did not fit my personal physique.
I bought it as a chest protector for R&R leather jacket, but the hard part is lower than I expected and I can't change the position due to the sewing on the jacket side, so I removed it and use it with hit-air chest protector.
View detail
Cosmetic but universal nature is…
I think it is a Protector that hardly fits unless it is a Jacket made by RoughAnd.
However, it is a Hard Type with a wide protective range and good cost performance.
I am using a DEGNER mesh jacket with a self-made pocket for Protector.
I gave it 3 stars for protection because I have never been protected by a fall, but I'm hoping for the best.
View detail
Soft pad...
Hard type is also available. Both are inexpensive. However, since it is long and narrow, it interferes with the chin of the helmet while driving. If you are worried about it, you can cut it by 2-3mm. View detail
You look weak
"The delivery arrived well and the product was received well.
It looks weaker than I thought.
Just a mushy sponge? It's the same material. I was expecting something thicker, but it's a little disappointing.
I did it in a summer suit, but I don't think it will protect my body ------------------------------------ ---------------------- I arrived well and received the goods well. It looks weaker than I thought. Just a shakey sponge? It's the same material, and I was looking forward to it more. I was in a summer suit, but I don't think my body will be protected. Powered by Google Translator"
View detail
As expected
Purchased for Rough MeshParka
The Rough Mesh Parka I purchased had a Chest Pad as an Option, so I bought it for peace of mind.
I used it for Touring at 35°C and the wind was cool and comfortable while driving.
I don't know about Shock absorbing power because of the many holes, but it's better than nothing.
I think it is a good idea. I will encourage safe driving so that I will not encounter any Case that uses it.
View detail
Used for Mesh jacket
I bought a Workman's Mesh jacket to put in it as I bought a Workman's Mesh jacket for a neighborhood choir ride.
It goes in as is without Cut, but is slightly longer vertically.
I usually wear Komine's Hard Type stuff in it, so it's not surprising, but I feel it's pretty unreliable compared to that.
I put the Protector in the Jacket and tried hitting it with my hand over the Protector, but did not feel it was that protective.
It may be good if it is better than nothing.
It looks quite coarse and breezy (image attached).
When the Protector is placed in front of a fan, the wind it is receiving is considerably reduced, and the Protector is fluttering in the wind.
It may not be as well ventilated as you might think, but it will be better than Hard Type.
The defense is better than none, and the ventilation is better than Hard's.
It might be a good idea if you buy it thinking that's about all you can afford.
I'm not sure I can recommend it. "Yes" I would recommend it if you buy it knowing that it is better than nothing.
I would not recommend it to those who are looking for a defensive focus.
View detail
I attached it to a mesh jacket by WorkMa Fat.
The 2022MODEL work mesh jacket came with a ProtectorPocket, but a dedicated Protector was not sold, and when I checked around, I found that it had just the right shape, so I purchased it. As a result, I was able to use the device without any modification. I recommend it because it is lightweight, has good ventilation, and gives a sense of security. View detail
Used for Jams Gold BECK-1 Riding jacketM Size
This is a RoughAndRoad Air throughPad, which means that it is not a product that matches JamsGold's Jacket, so you are on your own regarding its use.
Each Size of Pad is
Back Pad, approx. 43 cm (length), 33 cm (width)
Chest Pad, approx. 34.5 cm (length), 16.5 cm (width)
Shoulder pad, approx. 21.5 cm (length), 17 cm (width)
Elbow pad, approx. 27 cm (length), 16 cm (width)
The shoulder and elbow pads are curved and the length is aligned with the curved surface. The shoulder and elbow pads are curved, and the length is adapted to the curved surface.
The material is urethane, so it can be cut.
The Jams Gold BECK-1 Riding jacketM Size allows me to use the shoulder and elbow pads as they are. The back and chest pad had to be cut to fit.
View detail
Buy to protect yourself.
I bought a new Ruffolo Jacket and an optional chest pad to protect myself.
This is a stabilizing measure in case of a fall or an accident.
It is better not to use it, but it is an insurance policy in case of emergency.
I think any Rufflo Jacket that is compatible with the chest pad is strong enough to be attached to the Large.
It is hard, light and easy to install.
It looks and feels like it will last forever unless there is an accident.
View detail
Light weight for Hard Type
I bought this because the Protector for my Raflo Air Through Parka was too thin and this is an OEM product so it fits perfectly.
Also, it is light for a Hard Type and does not make you feel heavy.
View detail