Reviews
I just wanted to put this on...
Taichi's jacket RSJ726 Monster All Season Parka has elbow and knee pads, but damage to the chest, as indicated by the number two mortality rate after the head, Chest protector However, I didn't like the weight of the separate model (TRV079 Lynx Separate Chest Protector), and I didn't like the hassle of attaching and detaching the integrated model (TRV063 TECCELL Chest Protector). I didn't like the weight of the TRV079 Lynx Separate Chest Protector (TRV079 Lynx Separate Chest Protector), and I didn't like the hassle of attaching and removing the integrated model (TRV063 TECCELL Chest Protector), and the split model (TRV067 TECCELL Separate Chest Protector) seemed the best.
While the above three products are CE StandardLevel2, this is a lower grade. Level 1 compliant So, although it may be less robust, I decided to try this Balance because the softer one will definitely be more comfortable in driving conditions anyway.
It is exactly the same as 3Snap buttonType in Thailand. Pushing at the time of impact and instant hardening! and Fit your body with instant hardening soft fit! I believe it is a good sense of balance, if you believe in that point!
View detail
DP-001 Cut-resistant Slim fitInner protector with
It is attached to the chest of the cut-resistant Slim fitInner protectorDP-001.
It is thin and soft, so there is little discomfort.
CE StandardLevel 1.
View detail
Considerable comfort has been achieved since the last product Chest Protector
[How is it used?
The company's past products SAS-TEC Chest Protector CP-2 Body Only Item No.:94856 This is a Replace from
Was the one you received as per Image?
It was softer than I had imagined and flexible enough that even if I held it horizontally anywhere, it would not be level.
The Image is a shape-like SAS-TEC resin on a resistant fabric.
How was your experience with it?
The company's past products were thicker and a little stiffer, so when I put them in my Jacket and stretched my chest, I felt like a muscle breast plate ghost, and it was uncomfortable to hit my chest again. I am very happy with it.
And since they are thin, I am very happy that I don't have a muscle chest plate ghost.
[Points to note]
Although it is still a little uneasy at heart compared to the complete HardProtector, it is very comfortable considering the previous company's SAS-TEC as a standard. I am glad I bought it.
How did it compare to other products?
I don't know because I don't use other companies' products.
[Others]
I feel that the softness and fit are so comfortable that I would like to replace the SAS-TEC for Knee with the SAS-TEC for Shoulder and Elbow.
View detail
Looks effective.
Normally soft, hardens upon impact….
I tried it!
When I gouged it with something hard, it got hard!
The area is smaller than expected, but I believe that the acute areas are protected.
View detail
Purchase for tandem
I knew the importance of the chest protector, but I bought it because it was not included in the Daytona mesh jacket I purchased this time. It's one size fits all, so it's a bit tight for a small size jacket. It is said that the tandem chair did not feel very uncomfortable. I recommend it. -------------------------------------------------- -------- I knew the importance of the chest guards, but this time I bought it because it was not included in the mesh jacket. The size is one size, so the small size jacket has a little tight feeling. It is recommended that Tendemja did not feel very uncomfortable. Powered by Google Translator View detail
Relief
It seems to be strong but not too large, so I think it will go well with thin summer wear. View detail
It's properly cured!
I am not sure about the Protector that comes with the company's Coach jacket as I see it, I don't care if the price goes up, just make this Standard Equipment." I bought it thinking that it was a good idea.
It feels like a very hard, low-resilience material, but when the temperature is high or warmed by body heat, it softens and becomes less sticky and uncomfortable. It is a strange protector that becomes stiff and pushes when it is subjected to impact. I am sure that this is the case, because my hand hurt when I hit it as hard as I could.
I will continue to use it, hoping that it will not be taken care of.
View detail
DAYTONA Chest Protector
Light and soft, good fitting feeling to the body.
I don't want to experience the impact Damage, but the security of wearing it is Large thing? I think so.
View detail
About DAYTONA Chest Protector
I used to wear a chest hard protector. I saw DAYTONA's pre protector in a magazine and got it. it is soft and light and seems to be less uncomfortable to wear. I don't want to experience the protective properties myself. View detail
Used for DEGNER's Jacket
I tried upgrading my DEGNER flight jacket with a Standard Equipment Protector. The size is almost the same and it fits in the ProtectorPocket without any difficulty. I'm glad I wore it!" We will strive to drive safely so that there are no View detail
good chest protector
I bought this DAYTONA SAS-TEC chest protector to equip it on the NANGA AURORA-TEX jacket I bought before. I thought that this chest protector would come with the jacket, but it turned out to be optional. This chest protector It is usually soft, but when it encounters an impact, it will harden instantly to protect my body. -------------------------------------------------- -------- Buying this Daytona Sas-TEC breast protection is to put it on the Nanga Aurora-TEX jacket that was purchased before. I thought it would be attached to the jacket before the jacket. As a result, it needs to be selected. It is usually soft, but when I encounter impact, I will instantly harde my body. Powered by Google Translator View detail
Relief!
I purchased this product to attach to a Jacket that either did not come with a Chest Protector or had performance concerns.
It's a Separate type, so the middle is open, but it's not a problem.
Quantity:Pair (for Left and Right) The chest area of the "Mere Old Man" is covered with a gusset, which gives him a sense of security.
The hardness is soft enough to bend in ammmm bend when it is warm, but hardens when it is cold.
It is like a Ca Lamele or a Hi-Chew.
I use it curved to fit the Line of my body.
Weighing 102 g on one side, it feels light in the hand.
The thickness is about 1.5 cm, but the fabric of the Bag for installation is thicker.
When placed in a bag, it is thick and gives the impression of being large.
The pocket for the Chest Protector is on the Small Jacket.
It is attached with this Bag.
It can be used for both Velcro and Snap Button Type.
I thought it would be useful for a wide range of Jackets.
I just installed it on my summer Mesh jacket.
The shape of the Protector was fully visible from the front, and it was ugly.
Too bad ….
Jacket in winter was no problem.
There are rumors that the Bag for this installation has a Snap button that is fragile.
I wish Bag was sold separately.
View detail
Change Protector
I purchased this product to attach it to Komine's Inner protector SK-693 sSize. It is a little smaller than the existing Komine protector, but it can be installed. It looks a little cleaner. I would like to purchase one for my other Jacket. View detail
For lightness!
[How is it used? Purchased as Chest Protector for Thailand Chi AirTruckParka RSJ333.
Was the one you received as per Image? As per Image.
How was your experience with it? No problem, no problem.
[Points to note] None in particular
How did it compare to other products? I was looking for something lighter than the Thailand Chi SeparateChest Protector TRV079, so it met my objectives.
Other items that would be helpful
It can be attached to the Snap button on the Point of Installation or the hang/Thailand Jacket.
Items to be purchased together/nothing in particular if you choose the bag included.
Opinions and requests to Manufacturer/I wanted the ZipperBody? (moving part) to be hidden when closed.
View detail
It could be attached to any Jacket.
Breathability is not so desirable, but it is definitely lightweight. It is also good that it can be attached to both summer and winter jackets using Magic tape, so it is economical to use one jacket at a time.
You can't know how protective it is in the event of an emergency until you experience it.
View detail
Stack them up to increase defense!
Was the one you received as per Image?
At first glance, it looks like a slightly hard urethane sponge, which may seem a little uneasy to protect from the impact of an accident, but it is certified under the European standard EN1621-3Level 1. [Color] Since it is Clear, the performance is probably guaranteed to a certain extent.
[How did you feel about the Fit?
I usually wear Komine's JK-574 full year touring jacket Rama II, and although this jacket originally had a Chest Protector called SK-689 Inner chest guardSF as Standard Equipment, I have not used it. The SAS-TECChest Protector is a thin plastic and urethane foam protector, so I use it over the SAS-TECChest Protector. I don't end up using the special bag that comes with this product. 2 layers of Chest Protector gives me some pressure when I put on the jacket, but I don't mind it while riding.
How was your experience with it?
The Protector is somewhat stiff when cold, but becomes quite squishy and soft when warmed by body heat. It is good that the Protector fits to the body shape, but I am concerned about whether it can really protect the chest area. Impact "surface" I guess it's fine when you take it in the "point" I feel that it is quite bad when the product is subjected to a The fact that there are holes all over the Protector to ensure ventilation also makes the impact "point" The "M" in the name of the "M" is not supposed to be used in the case of the "M". For this reason, we thought it would make sense to use Komine's PlasticProtector on the front side and this SAS-TECProtector on the lower side (body side).
[Was there anything that disappointed you?
As long as we don't have accidents, we won't be disappointed, so we will strive to have no accidents!
How did it compare to other products?
However, since there was some concern about using it alone, we decided to use it in combination with Komine's Chest Protector by overlapping it on the underside (body side) of the Chest Protector.
View detail
SAS-TEC is soft and reduces the pressure on the chest
It is a store purchase but Impression.
[How is it used?
It is worn in a Jacket with a chest ProtectorPocket for summer winter.
How was your experience with it?
SAS-TEC is soft and can be worn without much discomfort because it adapts to the body, and it becomes a pigeon chest when seen from the outside because it becomes a little thicker than HardProtector, but it is whether to allow there.
View detail
This is a good product, light and strong.
Hokkaido Touring is being planned. "For God's sake, wear a jacket with a Protector on it. I bought a jacket with Protector for the first time in my 5 years of motorcycle history, and I also bought this jacket.
Fits the ProtectorPocket of Daytona's and Henly Begins' Jackets.
When it comes to Protector, CE Standard is famous, but this seems to be a product that protects with a completely different Approach.
It seems to harden upon impact. I understand that it's kind of amazing, but I don't understand the mechanism at all. The development of technology is remarkable. Well, I wore it a little for street riding, but I feel protected and I might end up driving more dangerously. I am going to be careful.
View detail
Easy to install, large and secure.
I bought this product to attach to my Thailand summer jacket, the Viento Air Jacket. The ProtectorBody can be removed from the Cover, so it is good that you can wash the Cover Only that is dirty with sweat. It is better not to encounter Situation to be able to confirm the extent of the effect, but I think that it is better to have less Damage to the body even a little in case of emergency, so I think that it will bring a good effect mentally to have a sense of security plus when I am riding. Considering that I buy a new one every few years, I appreciate this price. View detail
ProtectorSingle Body with a bag is a little expensive.
I think.
At least if the entire front surface is Velcro and the position can be adjusted anywhere, but if you can do seamstress, it is better to buy ProtectorSingle Body and process it appropriately.
Let's try to put EmblemBase on the vacant Space for now.
The Protector itself is a little thicker than the CE1's and a little thinner than the CE2's.
According to DAYTONA, the load capacity is 50% higher than the CELevel 1 standard.
I hope you never get a chance to try it.
View detail