Reviews
Pleasantly surprised.
I stumbled upon this whilst browsing the Webike catalogue from the bottom up. It piqued my curiosity, as it made promises to improve my riding comfort etc etc & for such a cheap price I couldn't turn it down despite feeling somewhat cynical about it. The mounting instructions on the product page are easy to follow. Removal of the old foot & fitting the new one only took a few minutes. (You will likely need to destroy the old cap to remove it) Having used it for nearly a week so far, I'm actually finding I like it & really don't have anything negative to say about it. Shifting with it is easy & light, possibly a little easier than previously. I can't say yet wether it relieves pressure on the foot like the manufacturer claims - maybe time will tell. Hence the four stars. Don't worry about too much positioning, as it will sit on the pedal naturally in relation to how your foot contacts it. It's less of an eyesore than I was afraid it could be. Overall for such a low price, I recommend you try it at least once. View detail
safety measure
I have a jacket and a Jeast Fit, but I have thick arms, so the elbow pad part is narrow and it is hard to move around. Unfortunately, I have to change back to soft pad for that part. View detail
I attached it to a Mesh jacket from Kuhl Lace Miss.
I attached it to a Mesh jacket from Kuhl Lace Miss.
Cutting to size is required, but can be easily done with scissors.
I think it is better protection than nothing, but when you actually fall down, the degree of bruising etc. will vary quite a bit if you don't have it on.
It's best not to fall, but you never know what can happen….
View detail
Excellent ventilation
As it looks, it has excellent ventilation, does not retain heat, and is soft, so there is no foreign body sensation.
However, as you can see, the bottom side is pointy, so depending on the Pocket, it may shift to one side or the other.
View detail
Rough &Road Air through pad set
I purchased this to attach to Workman's Mesh jacket.
The elbows and shoulders fit without modification, but the Spine Pad required modification due to its length.
It could be cut with Scissors, so it was machined and fitted safely!
After that, I will actually wear it and run with it to see how it feels.
View detail
Work Fat Mesh Jacket
I tried to attach it to the Workma Fat Mesh jacket. Shoulders and elbows can be attached without any modification. The spine pad on the back is a little large, so if you cut the top of the pad with scissors to fit the pocket, you can attach it without any problem. View detail
Easy to handle.
I was looking for a Pad in a Mesh Jacket. As you can see, it is mesh, so it doesn't interfere with ventilation. The shape can be modified with Scissors, so it can be easily and effectively matched. View detail
Style is good.
I used it here because it is a thick Pad for other Manufacturer's Jackets.
Scissors makes processing a breeze!
View detail
To make you feel better
As long as the manufacturer is producing, I think there will be an effect in the Large and Small It is However, you have to keep in mind that riding is always a good idea if you don't have a chance to use it I think it is better than nothing View detail
I will pretend to imply
Those other things do not write things that are fine as they are doing wonderful impressions, but it's a light, thin, cool three point set fly.
Regarding strength, for the time being as long as it does not happen even in the Large accident Large With the hardness and thickness of the durable position, it is quite impressive if you ran a bit.
At the previous intersection sliding on the white line of the pedestrian crossing the 5th and dragged in, the soft pad that was sewn in the 3 Season Nylon jacket of GardnerSeries who was out from phoenix was scratched by the lining Mesh , I remember I did not get hurt anywhere so I'm sure Large is totally durable.
Pad that was in use at the time of purchasing Mesh jacket of spoon two years ago which I am using two years ago which is used now is a thing with shoulder and elbow thing with 1 cm thick low rebound Urethane with holes at appropriate intervals, back and chest Pad was also Urethane sponge with a thickness of about 7 mm and fine holes open from point to point so I bought a recommendation of a friend I have been using for many years. (By the way, Chest Pad is getting in the way because it is in the way)
Even if you wear Rain Wear on top of Mesh jacket, the goodness of breathability is very big thing, it's comfortable to prevent steaming.
Jacket, who was heavily heavy when I bought it, was light and it became the original coolness of Mesh.
If you buy Mesh jacket, we recommend you to look at the places you said so well and buy it, and if you can buy with importance on design for the time being, this Pad is recommended.
View detail
I am using it in Komine's Full mesh jacket
【What made you decide the purchase?】
I bought it for installation on Komine's JK - 100 Protect Full Mesh Jacket.
This Jacket has a shoulder in Standard - elbow - Because it is equipped with Hard protector in the chest and Protector of the Urethane Material on the back, it boasts a defense-free defense power as Mesh jacket, but ventilation has poor airflow, summer is hot and it has no choice, so it is limited in the near field I was looking for Mesh shaped Protector.
Originally I was planning to buy the product of Rose sale of the same product, but I found a bargain Set of things on the way of search and bought it.
【How was it actually used?】
It's a combination of Mesh-shaped Protector in Jacket of Full Mesh, so it has the best ventilation, cold in the morning and evening in summer.
I think safety is far lower than Proton of JacketStandard Equipment of Komine. I think that it would be better for you to think that it is about the same level as not being honest as the original is Protector of Hard and Urethane.
In my case, I use Air through pad in the day-to-day ride with low speed range, exchange it with Protector of Standard Equipment for long distance touring using high speed and use it properly.
Since the shoulder and the elbow part were almost the same size as the Hard protector which was equipped from the beginning, it fits in the Pocket of Protector as it is, but since the Protector of the back was a little big eyed, it is Cut and using it. Since it is Mesh shape during Cut, Scissors was easier to cut than Cutter.
By the way, I studied whether to replace the hard protector of the chest part of Standard Equipment with Air through Pad for rough AndRoad's chest, but since the Metropolitan Police are engaged in awareness campaigns to install Chest Protector about it persistently, I am using.
【Fit feeling and height when wearing - Please tell me your weight etc】
It is comfortable wearing feeling without incompatibility even when wearing with a three-dimensional shape.
Also, since there is a Grip in the Material itself, even while wearing Jacket it will stay in place firmly without unnecessarily gapping.
[Is there anything I was disappointed about?]
Although there is no bad point to say this, I think that it would have been better if you could make it with a material with a little more strength if possible if possible.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Same as above
【Have you compared items?】
ROUGH&ROAD Air throughPad Shoulder - Elbow - Spine Pad
When searching, things of Rose seller came out first, but when I tried further searching, there was something of a bargain Set selling, so I brought it over there.
Those who think that the part is a Mesh shape Protector think that it is better to buy Rose selling items.
[Others]
Hard protector and D3Oetc. Compared to the high-performance Protector 's, it is more like a machine, so excessive expectations are forbidden.
Please consider that your use is self-responsibility, a certain level of safety and the coolness in the summer can be obtained with TradeOff.
View detail
It is better to have better than nothing
Although I purchased only Mesh jacket before, I decided to attach because it is a corner.
Material imagined a plastic system like Pipe, but it looks like Sponge.
Honestly, I think that it is better to have there than Level is not Level.
Is it suitable for those who run Hard?
I shed in mowing (Lol)
View detail
You can keep your eyes coarse.
In the Waffle mesh structure, it is good not to steam the air outstanding but it was a better Protector than a place I want a little more strength View detail
I used it for Jacket without Pad
I used it for Jacket for spring and summer without R & R's Pad. Until now I used Pad of Jacket for autumn / winter, but I found this product on Webike and purchased it. I thought that it would be a match for R & R's products, so I thought it was going to fit, I thought it was going to fit, and it fits perfectly to all the attached PartsSmooth and it was able to use it very comfortably. View detail
[Webike Monitor] He is Motorcycle beginner. The Protector was purchased for the first time. It fitted into the Jacket of a Goldwin which it had exactly. I think that it is light, and it is airy, and is cool, and they are good goods.
[Webike Monitor] He is
Motorcycle beginner.
The Protector was purchased for the first time.
It fitted into the Jacket of a Goldwin which it had exactly.
I think that it is light, and it is airy, and is cool, and they are good goods.
Although he wanted to obtain sense of security and it was purchased by equipping, it was soft than expected and uneasiness remained about the impact-absorbing effect.
If it is satisfactory that becomes narrow in liking to obtain sense of security like me, I will consider that it is better to choose a harder thing.
light - this product is infallible if it is practicality serious consideration with cool good - feeling of wearing -- I think that they are goods.
View detail
[Webike Monitor] The Mesh jacket of ラフロ is used by commuting. Although the backbone Pad of big Hole type sticks from the first, it will perspire, if it runs under blazing heat too. Although the Mesh jacket of the Buggy was also used b
[Webike Monitor] The Mesh jacket of
ラフロ is used by commuting.
Although the backbone Pad of
big Hole type sticks from the first, it will perspire, if it runs under blazing heat too.
Although the Mesh jacket of the Buggy was also used besides this Jacket, that one was a backbone Pad of the Type which the small hole is opening on the whole surface, and since it was fairly cool in it, it purchased this product.
Probably because the Pads which cannot be removed at the place where the
Jacket itself is various by the Type focused on a Protection stick, it does not go till the place referred to as cool, but it does not perspire from the thing of a big Hole type.
Although it was somewhat hard compared with the Pad of a Urethane currently attached from the first, it got used immediately.
I think that it should have changed earlier.
(^_^;)
View detail