Reviews
For WORKMAN's Jacket.
It is a little too Large for WORKMAN's Mesh jacket, but this is not a problem as it can be easily cut with Scissors.
Of course, I think it can be attached to RoughAndRoad's Jacket with no problem, but I don't know because I don't have it.
View detail
Fit is not great, but very warm.
[How is it used?
Winter commute protection
Was the one you received as per Image?
I thought it would Fit on the legs a little more. There will be a gap. See photo
How was your experience with it?
Very warm when worn under windproof Rain pants
[Points to note]
I think it is better to wear it under the Large size Rain pants, because I think it is easy to come off when falling down etc.
How did it compare to other products?
No comparison products
View detail
I'm a soft shell guy.
I have previously purchased a Jacket with Hood with a hard pad in RSThailand.
However, I personally do not like the firmness of the pad and was thinking of replacing it with something softer like a soft shell. The reason I don't like it is that it makes me tense up when I am not riding my motorcycle.
This product is a product of RoughAndRoad, but the Pad shape is similar, so they were compatible.
Of course, the safety will be less than the original performance, so I believe that it is the responsibility of the individual to replace them.
View detail
Added to Rough Parka for a little ride.
It is additionally attached to Rough Parka RR7234.
I think Rough&Road's Jacket would have Standard Equipment or Mounted Space.
The shape of the place where the Parts to be protected (back, shoulders, elbows, chest) are placed is the same.
See Catalogue for details.
I used to share Hard Type RR10074 with RR7001 Gore-TexTrekJacket.
I purchased an addition to my Parka for street riding.
The protection is 4 stars compared to RR10074.
Compared to a full-scale product, the Level is better than nothing.
View detail
Pad smells too much.
The internal Pad smelled so bad that I replaced it with another Pad.
Other than that, I am satisfied.
View detail
Not available
After only a couple of uses, the Rubber has stretched and I am indebted to the 100 Elastic band.
It was a pathetic creation.
View detail
It was Exactly in workman's Mesh jacket!
It was Exactly in workman's 2023MODEL mesh jacket.
Large Variety Satisfaction
View detail
Other companies' products will not fit.
I was going to use the Hard Spine Pad that came with the Thailandichi Jacket I bought 10 years ago, but it didn't fit in the Rough AndRoad Jacket, so I had no choice but to buy one.
I was able to use it for the Jacket at Comiket, but the Pad at RoughAndRoad is a size smaller.
Although it was an additional expense, Hard protector still gives me a different sense of security.
View detail
safety measure
I have a jacket and a Jeast Fit, but I have thick arms, so the elbow pad part is narrow and it is hard to move around. Unfortunately, I have to change back to soft pad for that part. View detail
Universal and easy to use.
I used the Protector for a Triumph Jacket I won at an auction because it did not come with a Protector.
It is for fall and winter, so it did not need to be Mesh, but it seems to be Universal and Quantity.:I will use it because it was an easy price to purchase in a set sale.
Probably it will be quite cool when combined with a mesh jacket.
It is not thick enough, but it is better than not wearing it at all.
The Largeness adjustment was easy to Cut with Scissors. The smell was a bit annoying, but tolerable.
After mounting on the Jacket, the Protector is not assertive, which is a good thing.
It would be nice to have a Punching type with holes as well as a Mesh type.
If Chest Protector is a Quantity:I think it is good to be able to choose according to need, since there seems to be a Set item as well.
View detail
I attached it to a Mesh jacket from Kuhl Lace Miss.
I attached it to a Mesh jacket from Kuhl Lace Miss.
Cutting is required, but can be easily done with scissors.
Although the protection is better than nothing, it is not as good as nothing at all.
View detail
I attached it to a Mesh jacket from Kuhl Lace Miss.
I attached it to a Mesh jacket from Kuhl Lace Miss.
Cutting to size is required, but can be easily done with scissors.
I think it is better protection than nothing, but when you actually fall down, the degree of bruising etc. will vary quite a bit if you don't have it on.
It's best not to fall, but you never know what can happen….
View detail
Plus peace of mind.
Purchased this for a Mesh jacket of the same Brand. It protects not only the upper part of the chest but also the whole chest, so I feel more secure. I was a little worried because the price was so low, but when I saw the product in the mail, I thought it was surprisingly well made and would be sufficient. It fits the jacket perfectly and is easy to put on. View detail
Excellent ventilation
As it looks, it has excellent ventilation, does not retain heat, and is soft, so there is no foreign body sensation.
However, as you can see, the bottom side is pointy, so depending on the Pocket, it may shift to one side or the other.
View detail
Excellent ventilation
I am wearing a mesh jacket, but it is old and the spinal pad is made of a urethane board. The Spinal Pad is made of a urethane board, which is not breathable, so when I stopped, it was sticky and stuck to my back. I looked for a waffle-shaped Mesh Pad that has good ventilation, which is now the mainstream, and found this product that seemed to fit in terms of size.
My impression when driving is that it is significantly cooler when running because of the wind draft. The shoulders inevitably come in contact with the back, so there is some stickiness, but the entire back is now cooler and less stuffy when the vehicle is stationary. Safety is not so good since it is made of urethane and mesh, but I think it is better than nothing.
Considering the comfort when running, I think the cost performance is excellent. If you are looking for safety, I think you should buy an expensive Mesh jacket or Spinal Protector. If the size fits, I would recommend replacing it.
View detail
Purchased for insurance purposes in case of emergency
[How is it used?
Purchased for Summer jacket from Laflo
Was the one you received as per Image?
Yes
How was your experience with it?
Not as sturdy as Hard Type, but installed for insurance purposes.
[Points to note]
It is soft, so some people may feel uneasy.
In that case, you might want to buy a Hard Type Chest pad.
How did it compare to other products?
I only have OEM.
If you plan to purchase Protector later, you may want to purchase a full Protector jacket from Raflo.
View detail
It was not bad to use, but CUB leaked due to sweat!
I wore it for a day on a hot, sweaty day and the part where the Protector was adhering to it was CUB-red and CUB-red….
The mesh fabric part is fine, but the ProtectorPocket part is made of stretch fabric that adheres closely to the Protector, and the Protector itself has no ventilation holes, so it gets stuffy.
This would not work in the summer or in sweaty situations.
I'd rather wear a mesh jacket that doesn't stick to my Protector.
View detail
Thin, lightweight, and inexpensive
[How is it used?
I purchased the soft protector for touring, winding, and highway use because I thought the original soft protector would not be safe enough.
Was the one you received as per Image?
It was just like the Image as shown in the product picture and Review.
How was your experience with it?
It is thin, and the fit is good because it is bent to follow the ribs. The weight does not bother you once you put on the Jacket.
[Points to note]
Note that this is not CE Standard compliant, so be careful if you care about it.
How did it compare to other products?
The plastic part is quite perePera, so the actual defense performance may be a little inferior.
【Review】
Considering the defensive performance that seems to be sufficient at the public road level, the lightweight and thin fit among hard protectors, and the price, I think the cost performance is quite good.
View detail
cost-effective
[How is it used?
I purchased the soft protector because I thought the original soft protector would not be safe enough for use on touring, winding, and highways.
Was the one you received as per Image?
The thickness, weight, softness, etc. were generally as per Image.
How was your experience with it?
I think it is one of the thinnest and lightest of the Hard protectors. After installation, I felt that the Jacket became heavier when I put it on, but once it was on, it was not so heavy that it bothered me. Combined with its original slightly rounded shape and its easy bendability, there was little discomfort in the riding posture.
Also, some reviewers said that Hard protector is hard to put into Jacket because it does not bend, but I was able to put it into Jacket easily.
[Points to note]
It is not CE Standard compliant, so be careful if that is your concern.
Compared to other companies' Spinal Protector, the part that hits the shoulder blades is made wider, so I think it needs to be tested to see if it will fit in other companies' Jackets.
How did it compare to other products?
I have never purchased a hard protector from another company, so I can't compare, but it is by far more secure than the soft protector. (Although judging from the picture, it seems that they are considering breathability in Hard protector.)
【Review】
It can be a recommendation for those who are not particular about CE Standard but are not comfortable with Soft protector. The price is low, but I don't think it matters much what CE Standard is at the point of hard, so if you choose this product for cosmetic reasons, this is the one for you.
View detail
Good for everyday
I bought this for protection to quickly put on my everyday clothes. I only ride behind my husband's motorcycle, so I think this will be enough for commuting and riding around town. When I go touring, I will of course wear a specialized MotorcycleGEAR.
It's easy to put on and take off, but it inevitably comes down gradually and floats around the knees.
View detail