Reviews
Tight fit
I had a hard time choosing the Size because it is a European Brand.
The upper body is muscular and for reference, Dainese is 44 is Just fit.
Not MotorcycleBrand, but XS is Just fit for Patagonia.
My impression is Tight fit and close to Dainese. I can't recommend it to those who have a belly.
The design is good and I would like to buy a different series in the future.
View detail
Must-have jacket for motorcycle travel
This REVIT Sand 4 H2O Textile Jacket is a very popular flagship travel jacket, the outer fabric is made of lightweight durable and abrasion-resistant polyester fiber, with CE2 level protection on the shoulders and elbows, two configurations The inner lining is suitable for riding in all seasons, and it is very intimate to connect the jacket and pants with a short zipper at the waist. -------------------------------------------------- -------- This Revit Sand 4 H2O Textile jacket is a very popular flagship travel jacket. The outer material is made of light -quality and wear -resistant polyester fiber. There are CE2 -level protective gear on the shoulders and elbows. Configure two types: configured. The lining is very intimate with the cycling of each season, and it is very intimate with a short zipper and pants with a short zipper on the waist. Powered by Google Translator View detail
A good companion for motorcycle travel
I bought the REVIT Vertical GTX Jacket on webike. This travel jersey is made of GORE-TEX fabric, which makes me not afraid of wind and rain, and I don’t have to wear a raincoat in a hurry on the plateau where the weather changes quickly. The jacket is equipped with multiple CE2 levels The protective gear ensures my safety, and the design is reasonable and comfortable. -------------------------------------------------- -------- The Revit Vertical GTX Jacket I bought on Webike. This travel cycling suit uses a GORE-TEX fabric to make me not afraid of wind and rain, nor do I need to wear raincoats in the high-footed altitude. The protective gear guarantees my safety, and the version design is reasonable and comfortable. Powered by Google Translator View detail
just the right amount of vinegar and salt
It is warm even in winter.
There is less flapping, so it is less tiring.
Holds the body firmly so it is easy to maintain posture
View detail
It's hard to feel the size.
I tried on the M and L sizes of this item at a certain store and thought the sleeves were too short for the M, so I decided to go with the L size.
REV’IT itself policy (?) The Protector on the back in the Quantity:Even if it is not set, and the fit was OK on trial, the sensation will be much different when Protector is added.
The back Protector is thick and heavy, and after it was installed, the fabric on the back was pulled back and the collar tightened even though it was not in the riding position.
Design and function are difficult to reconcile.
If you are close to the upper limit of SizeChart and plan to install a rear Protector, I would suggest going up one size.
View detail
Fit feeling highest
I was looking for a tight mesh jacket and came across this one. The fit around the arms and waist is high, and it doesn't give the impression of being too tight, so it's a good choice for those who want to look refreshed. The front fastener is easy to open and close, even with gloves on, because it's a type that doesn't have a zip on the sleeve so it doesn't damage the tank.
Ventilated Protector is included for elbows and shoulders, but Pad for back is sold separately Chest Protector cannot be worn.
I ride a mc22 and even with my old motorcycle which had a tight forward lean, my back doesn't show. It also comes with a zip to prevent the back from rolling up.
I'm a cautious 173cm and weigh 59kg and the M Size is just right for me.
View detail
Satisfied
I'm 180 cm, 71 kg, and the LSize is just right. it's made of mesh material and has a lot of air ventilation, so it's very breathable. This is the second time I've worn Revit's year-round wear, and it's lighter than my previous one, which is great because Revit has heavy protectors on both shoulders and elbows. View detail
If Chest Armour is an OEMOption, it's perfect!
It is very comfortable even in the rain, thanks to the water repellent surface and a fully waterproof inner. The thermal liner is tough and warm, but we didn't use it as it squeezes the muscles in our arms and makes it difficult to move.
The Waterproof Inner is warm, so even in the winter it was perfectly fine, considering a little InnerWear.
One complaint I had was that other companies have a bag that can hold the Chest Armour and this one does not. We sewed an outer jacket and made a bag to hold the Komine HardChest Armour. Other than that, it was 100 points.
I sold my TENERE 660 shortly after buying it and bought a Panigale 1199sp, which I no longer use and gave to my brother, so durability is unknown.
View detail
AdventureSuit is revit
I have been looking for a RALLY 50Suit for my TENERE 700 and I was really lucky. View detail
Simple
I was looking for a half mesh that I could use in early summer and early fall
This product has a moderate MeshBalance and is made of Nylon where strength is required
I'm 178cm, 73kg Firmly and chose the L size and JUST That's enough
If you want a snug fit, you could have gone with a M size
(PlusPoint)
The Brand logo and Mark are acceptable It is a dark jacket with reflective material, but there is also a sense of security
Also, I think it is simple, but Waterproof Windproof Inner is Standard It's not a solid product, but it's not a clunker None It will work in a wide range of seasons and elevations, as expected
The red flap with the zip open a little is a fashion statement
Standard EquipmentProtectorCE level 1 for the shoulders and elbows is also solid I do
I like the price
(MinusPoint)
Is it a little thick around the arms? It is too thin when I fasten the adjustment Snap
Since the Protector is for the shoulder and elbow only, it can be worn over the Protector vest on the back of the chest and I am
There is a ProtectorPocket on the back, but the Chest Protector installation part is None
The back protectorPocket is narrower, and Universal Product requires less processing You might need it
There is a waist adjustment Belt, but no chest adjustment Well, it's Mesh, so I don't mind the flap
View detail
A good product for Beginner
Komine's Jacket for a couple of years (JK-573 Protect Winter Jacket CE) However, it was getting dirty and old, so I decided to use it as a new jacket I bought the Jacket of
I've been wearing a Komine jacket for a while now
I thought it was standard to have Protectors in the shoulders, elbows, chest and back
This item was fitted with Protector as standard on the shoulders and elbows only
Therefore, you will need to buy an additional chest and back protector
The MSize was a good fit for me personally, but I was thinking about wearing a chest protector I bought the LSize
View detail