Reviews
Expensive, but Parenthesis is good and functional.
[How is it used?
I bought this because I didn't want to damage my Boots when I ride my Motorcycle with Timberland Boots.
How was your experience with it?
Belt to connect to shoelaces to prevent falling off, Sole side (Reverse side) has a Rubber to make footpeg grip.
The cheaper ones don't come with that, so it's a good make for the price.
Rubber is thin, so it is not hard to walk on. While driving normally, you can operate it without any discomfort, but in sports riding where you have to load it with your toes to the fullest, there is some gap and discomfort.
[Points to note]
L Size is more than 30cm in circumference. Boots that are somewhat sturdy, such as Timberland, will be in L Size.
If you buy a small size, it will not fit, and if it is too large, it will cause a gap, so it is better to measure carefully before buying.
View detail
This is hard to dislodge.
I had used a similar product from another company in the past, but it came off as soon as I walked. I was looking for a shift pad for my new Kadoya Black ankle after 25 years, and I found this product. The price is reasonable, but I am very satisfied with this product because it is genuine leather. View detail
Some caution required when using
The leather thickness of the part where the change lever hits the Boots is about 1 cm (2 pieces), so the lever angle may need to be adjusted wider in some cases. Also, if the Magic tape part is not properly aligned (if the rest of the Magic tape part on the upper side hits Boots), the leather of Boots will be damaged. View detail
feel well
I bought these for when I ride around town in Whitey Sneakers.
Since the product is made of leather, White will still show a little bit of color.
I guess it would be OK if I drop it in Wet tissueetc. right away, but I guess I shouldn't leave it there because it has its limits.
Some of you may have a problem with the Gap, but I didn't have a problem with it.
I am generally satisfied with the product.
View detail
It would be useful if there were.
Let's ride motorcycles! I don't ride in sneakers when I'm really determined to ride a motorcycle, but there are times when I ride in sneakers on a moment's notice. I bought these sneakers just in case the part where the Shift Pedal hits the shoe gets damaged by even a little bit of riding. I don't use it often, but I'm glad I bought it. It protects it well. View detail
For Mesh Type Sneakers
This is my first Motorcycle and I bought it because I drive with a bash.
Installation is easy and adjustable.
The drawback is that they shift forward, probably due to my wide feet.
There is also a Strap to prevent Gap, but it is shifted away from the Sole.
It is about to be pulled out.
I am going to make some adjustments and see how it feels to use it.
It is comfortable without damaging the shoes even when touring.
View detail
I like the floral pattern.
Deguna is good at making Small things.
This is also a very good product.
Grip is also good.
I use it to prevent my shoes from getting dirty, but I don't want them to get too dirty.
View detail
The decoration is cool.
It is a little easy to shift, so I sewed it to prevent it from shifting.
I use it sometimes because I like the decorations.
View detail
Hard to shift.
I like the fact that it is hard to shift.
We could choose some colors, so we chose a less conspicuous color.
Grips despite its silky smoothness.
View detail
![Motorcycle Wear Gear Protector [SCHALTHEBELVERSTAERKUNG]](https://img.webike-cdn.net/catalogue/18859/held-8450-01_TS.jpg)
Try it?
It looks good and is easy to use.
I'm glad my shoes are less dirty.
View detail
Cospa is good though!
No Shift change Guard, easy and good looking Matching for Sneakers and Boots?
However, the reinforcing leather on the back has been removed after only one use? I have only walked on the Toilet and ServiceeOnly rear. At first, I crimped and fixed it with G17. I will probably have to check and fix it every time I use it.
View detail
effective
It is easy to put on and is convenient to wear on large shoes to prevent scratches.
The well-shaped shoes are also easy on the back of the foot, allowing for smooth shift up.
View detail
Universal nature of Holder ◎ Guard selects the shape of Boots.
Material of Boots on hand:The plastic shift guard is falling apart due to hydrolysis, so I asked the manufacturer for a repair estimate and they said it would take more than a month for delivery. I looked for a Universal Shift guard, but after reading reviews and impressions, I found that many people had experienced that it came off easily and was dropped, so it seems that it must be a type with a belt that prevents it from falling off as well as wrapping around it.
All of my boots and shoes are laceless, so even if there is an anti-fallout belt, there is no place to fasten the belt.
I found this product, and since the Holder is designed to be compatible with other manufacturer's Guard, I bought it to try it out.
Quantity:As you can see in the product photo, the Shift guard set matches the thicker square shape of work boots. I put the rubber belt between the boots and the slider, and cut the slider attachment part. This prevents the slider from shifting and it feels like it won't fall off even without the holder, but the shape of the shift guard doesn't match the Boots and it doesn't fit right! In the case of boots with tapered soles that are not flattened, the guard lifts off the boots toward the toes and does not fit well.
I'm not sure if this is possible, but I've been working on a separate DAYTONA. Shift pad that is hard to dislodge." I also bought a
Holder is used upside down, only Shift guard is DAYTONA, and it is JUSTMatch!
In this case, Quantity:I purchased a Set, but the Quantity:The Shift guard set is suitable for work boots with a small difference in circumference between the instep and the toe.
DAYTONA's pad fits better with tapered racing boots.
In any case, since Holder seems to be Universalistic
Recommended for Boots without strings.
Quantity:The Set is a must buy for those who don't want to damage their square shaped work boots without laces and shift guard, or for those who have a pain from Pedal hit.
Durability depends on how it is used, so it is a matter of judgment for each person.
It looks good in my opinion. I think the cosmetics are good.
View detail
It looks like Elf's Pad and I'm happy with it.
I use Elf pads and tried to put them on my Sneakers and couldn't find them.
It's rubber, but not too soft or hard, and it's good to be able to cut with Scissors. If there is a snag, it can be cut and used.
I made two holes for shoelaces and removed the Band. Basically, I don't think about removing the Band, so if you frequently remove the Band, you might want to leave it on.
I didn't want to buy a Chinese product from Amazon so I bought it here.
View detail
For the protection of Riding boots
Was the one you received as per Image?
Street Image
[How did you feel about the Fit?
Exactly
How was your experience with it?
They'll guard you well.
[Was there anything that disappointed you?
It gets a little Gap when you use it.
I bought it because I liked the design and the DEGNER product. There is no gap between the front and back with the Magic tape and the Band, but when I use it, the tip turns and the rubber part comes off when I walk.
I don't think it's a problem if you're a little careful.
View detail
Strong operation feeling
The Shift Pedal has a better feel and is easier to put in Neutral, I had a Harley Evolution that was hard to put in Shift and I was worried about the Boots Damage, but it was easy to install and made it easier to ride. View detail
It makes it easier to operate
It prevents dirt and wound from sticking to the shoes by Shift operation, and the operability of SHIFT UP becomes much better. It can be fixed firmly and does not gap. The cowhide leather is strong and good quality, and it will be used for a long time. View detail
For improved shift operation and shoe protection.
It is made of cowhide leather with good quality and performance, and the gold price is very reasonable. It's easy to put on and it's not easy to gap while using. View detail
This is for Engineer boots
If you use Shift guard on Engineer boots, you should have it, not only to protect your boots but also to look motivating. View detail
To protect your Boots.
It is very useful for improving the shift operation in riding boots and sneakers. It's easy to shift without Gap while driving, and the material is solid leather, so it will last a long time. View detail