Reviews
Separate upper and lower sections allow for replacement when worn out.
I bought the upper and lower and installed them and I am very happy with them. It is good to be able to stop it at the upper part because the type that just wraps around the foot will definitely shift. It is very stressful to have to check each foot and correct the gap. It is also good for my wallet because I can buy only the lower side when it wears out. I am very satisfied with the effectiveness and usability. I can recommend this product. View detail
Separate upper and lower sections for convenient interchangeability
I ride with Engineer boots, but the shift lever started to get scratches, so I was looking around and found this. I found this one, which is very convenient and I like it because the top and bottom are separated so I can make fine adjustments. I like it very much. Now I can enjoy riding boots without worrying about damage from lever! There are many different types sold, but I can really recommend this one. It is not uncomfortable and not tacky when installed (this is a personal thing). View detail
Universal nature of Holder ◎ Guard selects the shape of Boots.
Material of Boots on hand:The plastic shift guard is falling apart due to hydrolysis, so I asked the manufacturer for a repair estimate and they said it would take more than a month for delivery. I looked for a Universal Shift guard, but after reading reviews and impressions, I found that many people had experienced that it came off easily and was dropped, so it seems that it must be a type with a belt that prevents it from falling off as well as wrapping around it.
All of my boots and shoes are laceless, so even if there is an anti-fallout belt, there is no place to fasten the belt.
I found this product, and since the Holder is designed to be compatible with other manufacturer's Guard, I bought it to try it out.
Quantity:As you can see in the product photo, the Shift guard set matches the thicker square shape of work boots. I put the rubber belt between the boots and the slider, and cut the slider attachment part. This prevents the slider from shifting and it feels like it won't fall off even without the holder, but the shape of the shift guard doesn't match the Boots and it doesn't fit right! In the case of boots with tapered soles that are not flattened, the guard lifts off the boots toward the toes and does not fit well.
I'm not sure if this is possible, but I've been working on a separate DAYTONA. Shift pad that is hard to dislodge." I also bought a
Holder is used upside down, only Shift guard is DAYTONA, and it is JUSTMatch!
In this case, Quantity:I purchased a Set, but the Quantity:The Shift guard set is suitable for work boots with a small difference in circumference between the instep and the toe.
DAYTONA's pad fits better with tapered racing boots.
In any case, since Holder seems to be Universalistic
Recommended for Boots without strings.
Quantity:The Set is a must buy for those who don't want to damage their square shaped work boots without laces and shift guard, or for those who have a pain from Pedal hit.
Durability depends on how it is used, so it is a matter of judgment for each person.
It looks good in my opinion. I think the cosmetics are good.
View detail
This is for Engineer boots
If you use Shift guard on Engineer boots, you should have it, not only to protect your boots but also to look motivating. View detail
Not good
PreviousQuantity:I can't use it with BootsBelt bought in the set, the Size of Hook is too small
The Hook came off yesterday, I'm tightening it up but it's only a matter of time before it falls off while running
As the years go by, it's getting better and worse as it gets better
It doesn't work
View detail
That's four times
Previously, I bought from various sicknesses in the actual store
Previously, Boots' BeltQuantity:I bought it as a set
The Shift Pedal is like File's (non-slip), so it's absolutely necessary! Even in NORMAL, there is a Damage in Sneakers, but the one I have on now has a hole in it You're definitely there because it opens up
Spec. is changing in many ways, you don't have to walk around with it on, but it's still friction and pressure It will be torn off, you'll have to break it off as a consumable
I bought it because the Pedal can get caught in the laces or the Pedal can get caught in the shoes, which can cause an accident It is
View detail
Useless
Where have you flew by one use.
So, it can not be evaluated.
In the first place, the performance as explained, the expectation was completely betrayed.
View detail
Used in TrekkingShoes "C1_02S"
- Shoes attached : Caravan's TrekkingShoes "C1_02S" (Size29cm)
- Your Motorcycle : SEROW250
About quality
When opening the product, it was confirmed that the hole through which the shoelace passes passes gap diagonally as a whole compared to the product image.
(It is hard to understand in the attached image, but ...)
Since this product is curved to fit the shape of a shoe, if there is the above-mentioned trouble, a large gap appears in the installation position.
I do not know whether the thing that arrived to me happened to have a problem or whether it is bad as the overall quality.
Usability
I have a problem described in?, But I devised devising the shoelace and I managed to use it somehow.
Sometimes my shoes are large and Lever hits the part off the Guard part, but it is a compromise range.
Because it is lightweight and has strength, I think that it is a good product unless there is a problem of?.
View detail
No way I can not change it.
ROUGH & ROAD's items have a sense of inexpensiveness, I still patronize other products, but I can not do this alone.
I tried to attach it to Shoes of High cut, but I purchased it, but the material is hard, rounded, it gaps, so it was not easy to operate, let alone change. On the contrary, Pedal got stuck in my leg and it hurt (I tried the two mounting methods in the manual but it is not good).
Wait a minute, surely I chose Motorcycle and Shoes were bad, different Motorcycle and Shoes (Sneakers) I tried it, but the result was the same.
I will search for other things. To be sorry.
View detail
It was a failure..
Because I often walk down Motorcycle, my shoes are for Woo King. The part of the finger of the instep is soft, with the fingers of the foot "Kakuna" I bought it because I do not like the feeling of Shift.
I can not use it at all. First, the shape is bad. Since Shift Pedal is more Right Side, this shape is enough to hit the tip of Pedal a bit. If it is not shaped to cover more Right Side. Length is also insufficient. This length is just the last time.
Coupled with poor shape, it is hard to shift.. Frequently often the beard is caught between this and the shoe by mistake. It is much easier to remove.
I used Velcro on shoelace and back together for installation, but it is useless.
At first, there was no problem at all walking with this attached, but do not use it for the essential Riding.
For Riding alone, the exclusive Shoes is the best. I should not have a Riding shoes considering walking.
View detail
Since the safety shoes currently used instead of the Boots at the time of commuting had been cracked by the Shift lever, they were looking for the Shift guard.Since the Type with which it equips with the Rubber belt was turned off in two days when it
Since the safety shoes currently used instead of the Boots at the time of commuting had been cracked by the Shift lever, they were looking for the Shift guard.Since the Type with which it equips with the
Rubber belt was turned off in two days when it walked stuck, this product was purchased in search of the Type knit by a Shoelace. a good point: He can walk, equipped.
Wearing is firmly possible at a Shoelace.
Color which cannot be easily conspicuous.
Firm intensity
a bad point: Because of an egg shape, when you walk, hit an instep and it is painful.
Since it is only one color, shoes are chosen.I am glad when there are various colors.
View detail
[webike] Although a certain mountain-climbing boots were used to the ankle of a Gore-Tex by Monitor commuting, the hit of the Clutch lever ... The thing which can cover only the shoes upper part with a string was looked for. The using f
[webike] Although a certain mountain-climbing boots were used to the ankle of a Gore-Tex by Monitor
commuting, the hit of the
Clutch lever ... The thing which can cover only the shoes upper part with a string was looked for.
The
using feeling is comfortable and it can use it.
Moreover, not only a string but the equipment which fixes the whole is attached.
If there is a different color, I would like to purchase for summer.
We can recommend you.
View detail
Although there was a thing also similar to the product of the other company, they were set through the sole by the Elastic band or the belt type. Letting the sole pass is torn, it goes out, or has a Risk of omission. Since the attachment b
Although there was a thing also similar to the product of the other company, they were set through the sole by the Elastic band or the belt type.
Letting the
sole pass is torn, it goes out, or has a Risk of omission.
Since the attachment by 2WAY of a shoelace and a Flap (what is fixed so that it may not escape on a Magic tape through a thing like a Clip among strings) was possible for the goods here, unlike the product of the other company, it thought that durability was satisfactory, and decided on purchase.
Surely there is neither omission nor a fear of a Belt being turned off.
Since it is goods attached to the last based on a shoelace portion, carrying out only
, it is dramatically difficult to aim and set to the position (also including the range of a certain amount of play) where a Change pedal hits depending on shoes.
If big form around which it turned to the inner side portion to a slight degree is carried out, I will think that the Cover range increases.
After
, although it is the form around [ form ] it went slightly in accordance with the portion of a shell, this does not suit the portion of the shell of shoes well easily.
If it bends by hand since the
main material is an Aluminum, curve condition can be united to some extent, but it is not perfect too.
If it is a soft raw material which says and into which it exceeds, is large and can change form also in raw material, I will think whether to become goods which can be used more.
Since it ends with a little improvement, I would like to expect at future.
Although only the
request was written and it was now [ striped ], the function to guard shoes is achieved.
Since I regard the goods not using the
Belt as or this much, in such a sense, it is recommendation.
View detail