Reviews
Difficult to detach and obtain
The base is held in place by a magic tape, but it is so far back that it is difficult to remove and must be pulled to the point of tearing.
As is the case with all HelmetParts these days, it was hard to get them in stock and I had to wait more than 6 months for them;
View detail
For city driving and a little bit of riding, Recommendation!
Helmet is always necessary when riding a motorcycle.
The hair can be crushed when wearing it for a long time.
Then there's a product that claims it won't crush or steam your hair!
A summary of many of the impres↓ sions goes something like this.
Merit:No hair crush, no steaming, It is easy to install.
Demerit, unevenness hurts (leaves marks), poor cosmetics.
The price of the regular product is 3,500 to 4,000 yen per piece, which makes me hesitate to buy it.
I searched around and found a product that seemed to be OME, so I gave it a try.
In case you are wondering, two for 2,500 yen.
In conclusion, all your impressions are correct.
My impression of the product is that it is just right for city driving and commuting.
Installation:Easy (position is your choice)
Feel:Less steamy (better than not wearing it), hair gets crushed after wearing it for a long time (about 6 hours).
Pain:It doesn't bother me for about 30 minutes to an hour. After that, the weight of the helmet starts to bite into it. 6 hours of wearing it, I had to lift the helmet every time I got a signal.
COSPA:I would buy hats if they cost 3,500 yen each.
View detail
subtle
[How is it used?
Used in Touring.
Was the one you received as per Image?
I had seen it in a supply store and it was on Image.
Was the installation difficult?
No problems
How was your experience with it?
The ventilation feels better and my hair is no longer flat.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
The Helmet's Size feel has changed because the top of the head is now tighter.
I wish they would make it a little thinner.
I've heard that it doesn't make my hair flat, so I'm happy about that, but I think the price is high.
View detail
One-touchSpec. will be w
Clip to make the chinstrap One-touchSpec.!
It took some effort to install, but with the One-touch chinstrap attachment, I'm happy!
View detail
Warts on my head…
I'm using it on my SHOEI JCruise, which has been in use for five years and has a dented interior.
I bought this because I use it for my daily commute and can't wash it often, so I hoped it would be less prone to sebum stains.
I am not sure about the sebum stains on the Helmet interior as I throw it in the washing machine whenever I feel like it.
I put one between the interior and the other, so I think it's less likely to stick.
I can't tell if my hair is messed up at all because I have a shaved head.
I feel that the Helmet's Bench effect is enhanced because I feel more air flowing through my head.
The biggest demerit is that if you wear it for a long time, you will get warts on your head.
The Inner Cap is a necessity if you are going to ride for a long time.
View detail
Out of despair comes hope.
If I take the helmet off every 2 hours or so, it doesn't get squashed, and if I shower, it's almost back to normal. If you wear it for a long time, it becomes flat, but there is still hope to return to the original compared to the time when there is not. 2 hours or more, I think it is individual difference, but I think that the head comes to hurt by ThornThorn, so the break is Large cut moderately. View detail
I no longer worry about how my hair looks when I take my Helmet off!
First of all, the ventilation inside the Helmet will be better.
If you don't want your hair to be floppy when you take off your helmet, it's a good idea to buy this.
Demerit can be painful if you wear it for a long time.
View detail
How well it works!
I bought it because a friend who uses it recommended it. It definitely creates a physical gap, so you can feel the breeze. Also, it's good for those who care about their hair... (I don't care for it myself.) I hope it's a little cheaper View detail
You need Ventilation on the Helmet.
Without air ventilation in the forehead area, you may not feel the effect as much.
As for Hairstyle, I definitely feel like it's not falling apart there either.
View detail
It didn't fit in my head
Put this in a Helmet and wear it to keep your Hairstyle from collapsing and your head from getting steamy, etc They have a However, the warts shape creates a space with the scalp to have such an effect, and The weight and wind pressure of the Helmet pushes those warts against my scalp and makes my head hurt when I run.. .. I ended up using it about two times and gave it away to others
I think there are some heads that fit and some that don't It's not that cheap and hard to try on, though, so it's difficult
Looking at Impressions on the Net, it seems to be effective, so I'm just saying.. If you are interested in buying this product, you may want to try it out
View detail
I bought it as a backup, just in case
At the end of the year, I purchased a WINS X-ROAD COMBAT and used the included Postcard to enter the I received a free Fogwyn Plus
I need to remove the Visor, Shield to install the fogwins, and various Screw is Material for better Visor attachment:Because it has been written that it is weak with Aluminum, it is a spare Repair Parts I ordered it as
I couldn't find the Coin driver, so I ended up turning in a $500 coin, but In the end, I was able to do it without damaging Screw
So I had to keep it as a spare
View detail
It is okay
Although I felt sore at first it felt like there was a nice place while using while changing position slightly
Although I might be used to it, I felt that it would not hurt so much if I found my own position
I felt there was a reason for the effect
View detail
Almost, the product as described
It is still before the hot weather, but try on it for about 30 minutes ...
- A place where the protrusion hurts came out. Is machining like impression essential?
- My habit of getting on my hair was a little, he fixed it by hand. (The forehead that is not covered is marked bad)
- It is not loose Helmet, but it did not feel too tight.
I'm trying to ride more properly, but I wonder if I buy it and I will not lose it.
View detail
It is the second post.
This time we will report the degree of exhaustion after using for about 2 years instead of product performance
As for the usage situation, I used washing with Helmet interior about once every 2 months using 3 to 4 times a week. Under that condition Ink seems to blur in the first year and that Ink comes out in the second year. Silicon also loses its tension, and when it is held in hand, it is pulled by gravity without sloppiness. If you put it in the Helmet, it remembers the shape of the interior if it is originally, although it is totally rounded, it can not be done, deterioration of Silicon becomes visible and the surface is uneven as well It was
On the other hand, as for another VentilationLiner purchased at the same time, the frequency of laundry is the same for 1 to 2 times of use per week. Compared to the comparison, deterioration is different, there is no bleeding of Ink, there is tension, and irregularities can not be seen on the surface
The two elapsed times are the same, but the frequency of use is more than doubled, so did the progressing speed of deterioration become faster? Even so, there is a difference in the degree of consumption. Either way, I think that there will be a deterioration due to the fact that Silicon has had a hole and water entered from there. The reason why the hole was emptied is unknown, probably because it hit a defective product ...? (=ω=;)
View detail
I want the texture to be better.
I purchased it because I accidentally damaged Shield base when I exchanged Shield.
Although it is easy to install, the texture is cheap, as dictated by the previous one, it can not be said that the durability is also high in flattery.
It is a fixed part of Shield, so I'd like you to raise the precision of the part where the shield's nail is plugged in particular.
View detail
Since desorption was troublesome at the Belt type, the jaw string of an ARAI's Full face currently used attached this One-touch clip. Although surely it could remove easily and became convenient single hand, since the feel when it inserts in is blun
Since desorption was troublesome at the Belt type, the jaw string of an ARAI's Full face currently used attached this One-touch clip.
Although surely it could remove easily and became convenient single hand, since the feel when it inserts in is blunt, they are uneasy goods which remain a few.
An after [
] metal part rusts easily for a while.
View detail
It is a Base for fixing the Shield portion of the Jet helmet with a Bubble shield of a LEAD. It exchanged together with exchange of a Screw. As a required Parts, a price is also cheap, and attachment is also easy. Since appearance only carried out
It is a Base for fixing the Shield portion of the Jet helmet with a Bubble shield of a LEAD.
It exchanged together with exchange of a Screw.
As a
required Parts, a price is also cheap, and attachment is also easy.
Since appearance only carried out Plating paint application in fact at the Plastic although seemingly it was metal, it is clearly cheap structure.
since it is merely exclusive elegance, it is satisfactory at all to the function itself -- it is .
View detail
It attached to Arai MZ. Although the jaw string's snap button was obstructive and was not able to let metal fittings pass, your impression has been attached by bending and referring to the stretch of the (1) portion of metal fittings. Although the
It attached to Arai MZ.
Although the jaw string's snap button was obstructive and was not able to let metal fittings pass, your impression has been attached by bending and referring to the stretch of the (1) portion of metal fittings.
Although the jaw string which remained collected by the belt stop (2) which suited at hand, he turns up and can also usually stop a snap button part to a passage.
Since a jaw string cover cannot be removed attached, when washing an inner package, it is necessary to remove.
It is troublesome to bend and carry out the stretch of the metal fittings to the degree of wash, and reinforcement is also likely to fall gradually.
Although the handiness of buckle fixation is charm, I feel that it may stop using before long for the reason mentioned above for it.
View detail
Although it is attachment, it is attachment by the side of metal fittings. Although a belt part is only forcibly stuffed into the break of buckle metal fittings, it is not likely to enter easily but a crack is likely to go into a belt. Since the hook
Although it is attachment, it is attachment by the side of metal fittings. Although a belt part is only forcibly stuffed into the break of buckle metal fittings, it is not likely to enter easily but a crack is likely to go into a belt.
Since the hook of floppy prevention did not hit and pass along the opposite belt side, the fixing bracket was once bent and removed on pliers, and after letting the belt pass, it reattached it.
How may I stick? Since an instruction manual was not attached, either, I thought that it was unclear.
Truly, lock release at the time of wearing can be performed simply, and attachment and detachment of a helmet become easy.
Since the buckle part was large although it was covered with the rubber however I thought that reinforcement is also enough since the main part is metal, sense of incongruity was felt at the time of wearing.
We recommend you a direction with much number of times of attachment and detachment by short distance.
View detail