Reviews
![[Repair Parts, Optional Parts] RS-1 Rear Spoiler](https://img.webike-cdn.net/catalogue/images/125897/RS-1_TS.jpg)
I feel like an EWCRider.
I have purchased a thunder c gp, which I have longed for, so I added it to my collection.
I found a careful explanation on the LS2 website, so I worked with that as a reference.
Firmly peel off the Defferential Gearo Spoiler attached to the strong while warming it up with a dryer.
If you heat the double-sided tape strongly, it will be easier to peel off the double-sided tape, but it must not harm the cap, so just warm it quickly and peel it off with the determination to break the Defferential Gear or Spoiler (laugh).
I'm guilty of breaking my new Helmet (laughs).
The description also said that the Defferential Gear form spoiler is not reusable. However, it is not easily broken and can be reused after applying a new double-sided tape.
Once the tape is peeled off, the glue from the tape is removed with a label remover and the adhesive surface is cleaned with silicon remover. This is the most large and strange part of the process.
The tape was temporarily placed on the surface and positioned at key points, and the chili feeling was memorized with the fingertips.
At any rate, I am Large satisfied with Parenthesis goodness.
However, it is a little disappointing that the Rear Emblem is hidden.
I would like to try the effect with HelmetBody at Circuit next time.
View detail
There is a LARGE difference between "with" and "without".
A must have for retractable Competition shield. No rattling. View detail
OffHelmet with Glasses
It is especially convenient when attaching and detaching the OffHelmet.
The fogging is eliminated by removing it even at traffic lights, and it can be quickly put on for running.
Convenient anyway.
View detail
It was carefully packaged and delivered to SPIDI!
I ordered it as soon as I found it because it is not easy to find. One thing to note is that it is Snap onType, not Bolt On. The Screen that can be attached to this Converter is limited to SnapType. View detail
I use it for EX-ZERO.
I am satisfied with both the convenience and the appearance of the product, which is exactly what I was aiming for!
The shipping from Webike was fast and courteous.
View detail
I like the ease of it
I used to love it when I used to go on my own long-distance expeditions and run Dirt to GunGun, but I don't run Dirt very far these days and stopped using it from Timing when I bought a new Helmet.
I think the reason is that I don't have to take the Goggles on and off as often anymore.
Also, the recent Strap from Goggles is so beautifully designed and non-slip that I felt it would be a shame to replace it with this one.
However, I recently purchased a new off-road vehicle, and after driving long distances, and even more dirt, I miss the convenience of this thing, so I bought it for the first time in a long time.
It is still convenient.
The design is also a bit more Edge and Sharp.
The most important advantage is the ability to quickly attach and detach the goggles with one hand, especially when attaching and detaching the helmet.
Installation is easy.
If you are not familiar with the position of the paste, you may be a little confused. (English Version) If you put it on the street, it's almost perfect.
The following are two things to keep in mind.
1.Strap size of Goggles you want to replace this with (width) to see if it fits.
Most large items can be made with this normal width, but sometimes narrow or wide items can be made with this width. (SCOTT's Advanced Gradeetc.). Since there are
2.I don't think it is possible to convert a Strap with a special installation method, so I think you need to be careful there.
View detail
It is useful for attaching and detaching the helmet!
[How is it used?
ARAI's Helmet is a type of helmet that is fixed by putting the chinstrap through the D Ring, so it takes time to put it on and take it off one time at a time.
KITACO and DAMMTRAX's could not accommodate the width of ARAI's chinstrap, so the only option was KIJIMA.
Was the one you received as per Image?
I thought the Black part was Plastic, but Material:It was Rubber. I think the texture is not bad, even if Steel is unavoidable.
Was the installation difficult?
If you do not bend the bracket between the belt and the chinstrap, the plastic part of the chinstrap will get caught and will not go through. It requires some ingenuity. I used other people's installation as a reference.
How was your experience with it?
If it is so convenient, I wish I had used it earlier. Some people say that the excess string becomes like a whip when cruising at high speeds, but if you fix it with the original plastic part, it will fit with no problem at all.
[Included Parts:were they on?
None in particular, and no Instruction Manual is available, which is unfriendly.
[Was there anything that disappointed you?
Nothing in particular,
I think it will eventually rust because the material is steel, but if it were made of stainless steel, there would be nothing to say.
▼Material even if a little expensive:I would really like you to make a Stainless Steel product. In that case, it may be difficult to process Bracket, but ….
View detail
A must-have for the Eyeglass Rider
I had given up on OffHelmet and Goggles because I use glasses, but when I learned about this product, I bought the whole set.
The result was that Goggles could be used normally!
Although there are more removal and attachment ceremonies than for the naked eye, if you choose the OTG Type for the Goggles, you will be able to decide without problems.
It is a little difficult that one of the Strap hangs down when removed, but considering that Goggles can be used with glasses, it is not a big problem.
However Goggles can only be used with Small glasses, even with OTG display. There are many Manufacturers, so you should actually try them on your glasses before you make your choice. I recommend Scott's OTG after trying many different ones.
View detail
Kemeko goggle clip
About quality and texture The clip is made of stainless steel. The contact point was given a Velcro with non 3m sticker About the feeling of use It holds the goggle is place in a case of the strip popping out. Removal of the goggle strip to the holder takes a bit of effort as the holder is made of metal. About Design Design is genius but the material is a bit heavy. Cost performance and comparison with other products Not sure about other products which I didn't saw it in the market yet. But price is affordable which I bought two which I can change me colors of goggles effortlessly. About shipping and packaging Item is small. Shipping is not expensive. Any concerns, cautions, or advice when purchasing I bought two as I have to change the goggles colors for day and night. The strip is pretty hard to remove so if buying two is easy for other goggles color changes. If one color you need just purchase one will do. Which I use it for my Simpson M30 View detail
Daily use.
I bought this for spare parts.
I searched for it but didn't find much on the web, so I bought it here.
View detail
Highly satisfactory and convenient product!
I wanted to attach and remove Goggles easily, so I bought it.
It is as convenient as I had expected.
If the fixed position is slightly off, Belt can be adjusted, so Large is sturdy without that much nervous positioning.
If I had to say, the hardest part would be removing the Belt from my Goggles.
Strap for this product is not explained, but the structure will tell you how to fix it.
View detail
I have been using it for a long time.
Do I have to remove the Goggles when wearing the Helmet? Yes, but it is easy because you only need to remove the Magic tape.
I change it every time I change Helmet.
The previous version had the resin in the same color as the Strap, but the MODEL has been changed and the resin part is now only Black.
This time, I made the Goggles in Black and the Strap in Black, so I don't mind.
I like it, although it is more expensive than I expected.
View detail
Exclusive Screw, no other substitution possible
When replacing parts of the Helmet, I thought that the Screws were not so important.
I was expecting this, but I couldn't find a replacement at other Screws.
Purchased
It's not expensive, so you can use this special Screw for this Helmet.
It is better to use it.
It is only a dedicated product and it fits perfectly.
View detail
It will be a nice revival.
Aluminum part will be scratched, so a new replacement will bring it back to good shape.
When installing, it is recommended to apply a small amount of silicon grease before installation.
Shield's movement is Smooth.
View detail
As expected of an OEM Product, it fits perfectly!
I bought this with spare parts for the Helmet I purchased.
I haven't replaced it yet, but from what I've seen, it's an OEM Product.
It is the perfect Size.
View detail
Easy to use even after model change
It is easy to take off and put on, and I used it for the previous MODEL. View detail
cheap and quick
It arrived about 4 days after ordering. The price was also the lowest I could find. The installation was done by a contractor who filled in the uneven areas with Pate and then Allpen. View detail
Since it is a resin
Resin Screw, damaged by falling helmet. It is to be replaced. View detail
Higher grade feeling
It is a privilege for Large people.
Make a difference from the others.
View detail
A necessity for eyeglass users
Goggles to Quantity:I used to have trouble adjusting the position of the glasses when setting, but after using this, I can easily adjust the position, so I recommend Large Change. View detail