Reviews
Required processing
The one-touch made it easy to attach and detach the Belt, but the part where the Belt passes through is too narrow and the Button attached to the Belt does not pass through. View detail
![Ventilation Liner for Helmet [Skull and Bones]](https://img.webike-cdn.net/catalogue/images/2697/ho-air_hd-no-02-01_TS.jpg)
Unfortunately, it works, but it's not painless.
At first, it was good, but after about 30 minutes, my head began to hurt and I realized that I could not use it for a very long time, which was disappointing.
I shifted the position of the device to see if it would improve somewhat, but after some time, it became very painful.
View detail
The string is easy to pull out.
I am afraid to attach the strings later by Sliding them without sewing them, but they can fall out.
A soft type of string may slip through the gap and lead to an unexpected accident.
I ended up sewing it up and using it so that there was no Gap.
View detail
That's too bad
For one thing, I was surprised and a bit troubled that the Instruction Manual was nowhere to be found.
One, I made the mistake of buying it without looking closely at the impressions.
I did it as I saw fit, but alas, I did not use it.
I tried to install it on an ARAI RX-7X, but when I put the string through the bracket on the Male side and folded it back, the Button hit it and did not go through.
I also tried with SHOEI's J-Force ? (25mm string), but the Male side also did not go through because the Button was in the way.
View detail
How to remove
I was able to remove it by inserting the radio pliers as shown in the photo and pulling it out strongly while holding it down. I don't know if it can be used again, but I don't recommend it because it is a safety issue. View detail
![Ventilation Liner For Helmets [Checkered].](https://img.webike-cdn.net/catalogue/images/2697/ho-air_hd-no-05-01_TS.jpg)
It might be a little large for women. 。。。。
For those of you with XS to S Full face helmet, you may need to get a little creative.
I wear a S Size Full face and when I went Touring for half a day with this product on, I got marks on my head and headaches.
I thought it would be different if it was a Jet type Helmet.
View detail
It gives me a headache.
You can hardly feel the effect of the breeze when you put this on.
If you wear it for a long time, the weight of the Helmet will gradually push the Silicon flecks against your scalp and head, making your scalp and head hurt.
I threw it away because my head started hurting more and more over time and I couldn't stand it anymore, even if it would improve my blood circulation by preventing hair loss.
View detail
headache
I put it on for about an hour and a half, but Helmet is a perfect size or my head hurts! View detail
Fits: Others
Ouch …
Can I easily take it on and off while wearing Gloves? I bought it, but when I tried to fasten the chinstrap tightly, the plastic part was stuck to the skin It's biting and extremely uncomfortable
I removed it immediately
I liked how easy it was to install
View detail
difficult to use
The installation was easier than any other product I've ever used, and the construction was very convincing It's just a matter of accuracy, and although it's possible to fix it in place with one touch, it doesn't come off at times I'm going to have a hard time with it 。 View detail
subtle…
Buy Jet helmet. DRingSpec. Because I bought it from the troublesome.
Because it is Universal, Spec. That's it.
It was originally a tight helmet so I could not get it first in normal driving.
I think that it is useful if there is.
Those who place importance on practical use may be tough.
View detail
![Ventilation Liner For Helmet [Frames].](https://img.webike-cdn.net/catalogue/images/2697/ho-air_hd-no-04-01_TS.jpg)
Maybe he or she chooses Helmet
Usually Helmet is S Size (OGK KABUTO AerobladeIII) using. When I used it for about 40 minutes to go to school, Iboibo hurts, I have started headache ....
I thought that it might not have been suitable for Exletly's Helmet, M Size (arai RX-7 RR5) I tried it with Helmet, but it still itching itching.
The shape of my head is not a good one, but it is the first time that I suffered a Helmet and had a headache ....
Since it is not cheap at all, I will think about ingenuity without giving up.
Just a hair disorder was somewhat prevented.
View detail
Excessive Large expectations are prohibited
Prevent hair collapse and buy to improve breathability.
Helmet is OG KKABUTO ASAGI.
I could do installation without suffering anything.
(About a moment Quantity : Pair (for Left and Right) I did not understand)
Because I expected so much,
I was not feeling much effect.
Breathability and collapse of hair.
If it is a bit cheaper "Is this like this?" I guess it might have been.
View detail
A little disappointed with low durability.
Since the Screw of the flip up portion of the CR - 4 that I normally use was loose, I tried to remove the Shield to tighten it again, I broke the nail of the Shield base and purchased it as for Repair. CR-4 itself has already been discontinued, but this part was saved because it was a common part with CR-1 modify.
The exchange itself is easy, but the material itself seems to be brittle, so I tried to install the shield after replacement, and a part was missing. Although it is used as it is because there is no problem, it seems better to think that this part is a consumable item.
View detail
Yamaha It attached to YJ-5. The Snap button removed and attached. most worrisome, metal fittings are equivalent to the Adam's apple -- you must just be going to adjust looseness a few. Since the Size of a Helmet is S, it may be that it is too many worr
Yamaha It attached to YJ-5. The Snap button removed and attached. most worrisome, metal fittings are equivalent to the Adam's apple -- you must just be going to adjust looseness a few. Since the Size of a Helmet is S, it may be that it is too many worrisome. I would like to try for a while and to judge. View detail
The string of Z-6 is long, since it is metal although the kana which can be adjusted if it is this was thought, it is heavy and also attachment is quite difficult. It may understand whether to be attachment and is not attached.
The string of Z-6 is long, since it is
metal although the kana which can be adjusted if it is this was thought, it is heavy and also attachment is quite difficult.
It may understand whether to be
attachment and is not attached.
bought and lost.
A direction with
D ring feels that attachment and detachment are easy.
View detail