Reviews
Hairstyle is hard to collapse !!
I bought it by seeing the reputation in item description and Impression.
I feel protrusions when you are covered and when you open or close the Shield
In the usual state, protrusions (Bottom boots) I do not care enough.
The sense that the air escapes is whether the refreshing feeling has increased if it is told, but it is
Than that - - - -
Hair collapse when taking off (It will look like Sazae depending on the shape of interior) But
Almost gone..
Especially when you spend a long time in Touring etc, the difference is clear.
It was good to buy!
View detail
Accuracy is good, appearance is tightened
I bought a Diamond back at Sale so I purchased kemeko's Shield fixing BilletScrew.
【What made you decide the purchase?】
The purpose of purchase is two
- Improved appearance
- The attached Pivot screw has poor accuracy and is difficult to detach
is.
Especially the standard Pivot screw felt broken if the accuracy was bad and the feel of tightening was bad and it had been tightened or loosened many times.
Since Helmet is a practical item, you must do it if it gets dirty. It is a purchase of being pressed for necessity because it is not possible to install and dismantle every time after all.
【How was it actually used?】
Compared to the included Pivot screw, the accuracy is good so we will go into the Screw hole with a slurry.
It seems easy to relax by that amount, so it's a good idea to lightly check the slack before Touring.
【Mounting was difficult?】
Standard Pivot screw for coin etc etc. Coin counterclockwise to remove it, just tighten the BilletScrew clockwise to fix it.
【Please tell me the installation point and hang】
When turning with too much force when fixing, it will lead to breakage of Shield or Screw hole, so be careful.
[Is there anything I was disappointed about?]
nothing special.
【Hope for Manufacturer - Please let me know if you have any improvement points]
nothing special.
【Have you compared items?】
- The company's BilletScrew Red
Since it gets up nearly 1000 yen just because it is colored, we made it cheaper Plain this time.
[Others]
Although some price is stretched, a little investment will increase the sense of quality.
This Screw and Smokeor Mirror shield should absolutely be installed when purchasing Simpson's Helmet.
This time I made it Plain color because of the budget, but it was a pleasant miscalculation that I got a luxury feeling better than the one that was badly anodized if I actually wear it.
Moreover, as accuracy as Screw is good, it also plays a part in improving Maintenance ability required as a practical article, so it is a gem that I really recommend for those who use Simpson's Helmet with Fleece top mechanism.
View detail
It is also useful for fine adjustment of Size.
【What made you decide the purchase?】
Because the size of Helmet was slightly bigger than the head and I was concerned about sliding down during use
【How was it actually used?】
Whether it stopped sliding down as expected and the mounting position became proper The wind chime from Cheek Pad disappeared.
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
SHOEINeoTEC (L) The previous MultiTEC etc was just right at L, but seems to have changed slightly with NeoTEC.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Not at the moment.
【Have you compared items?】
It is about a different color.
View detail
Although it is self satisfaction, it is luxurious UP
I bought it with Simpson M30.
Original Plus ticky - Material - Spec. Although it is not bad, I bought it because I used Gold around parts of Motorcycle. Small さ な パ ッ ツ Demonstration Ali, I think I am upgraded but the luxury feel has improved.
View detail
Fits: YAMAHA YJ-14 for ZENITH, YAMAHA YJ-16 for ZENITH
Plastic parts purchased Spare.
Shield, Sun visor, etc.. I bought Repair Parts of Plastic parts because I want to have it with Spare. Although it is said to be Spare, if you purchase it with parts, it will be a good Gold amount.
If you do something wrong, you better buy Helmet that thing!
View detail
Spare required.
Shield, Sun visoretc. I bought it.
Plastic parts are not uneasy if there is no Spare... It is a place not too much fun, so it is not easy to break so easily, but since you prepared Spare with Y's Gear, I bought it because I should purchase it.
View detail
My hair did not go to sleep. Avoid headaches as well - - -
"The hair goes to sleep" It was 2013 that I bought the sort of AirHead that was the first effect of the effect. Since it was introduced in one magazine, it became short at a stretch and went out to buy it to Motorimoda.
Although I did not sleep properly when I wore it, my head hurts if I am short haired and do it for an hour. In the beginning I had patience but I could not stand it anyhow and eventually entered the storage. "I do not recommend using people with short hair" And although the explanation was written - - -
Two years have passed since then "Would you like to try a little bit if you lay it down?" One day suddenly comes to mind. In the scissors at the top of the head, scissors. Then how about it, the effect that the head hurts like a lie and the hair does not go to sleep may last on!
I think I should have tried it faster, but there was resistance to saying something that is not cheap as a part.
Although this usage may not be recommended, headache will disappear if cutting the protrusion of the part whose head hurts in a little range. Trial is self-responsibility.
View detail
Hair does not collapse !!.
【What made you decide the purchase?】
Perhaps I have been interested in it for more than two years and I put it in the Motorcycle shop, so I first bought it with one wig Big.
A year later, this time it is purchased at Repeat. The picture is attached to Arai's RX-7.
I installed it without gapping in another Helmet, so I think that any Helmet is OK. It's Rubber, it's just a fake.
【How was it actually used?】
It hurts if I suffer Helmet for a long time.
To be honest I think this is familiar. Lol
There may be people who do not agree, but now it does not matter.
【Was it difficult to install? (Hard parts case)】
I am attaching a pump. As soon as I'm worried, I would like to attach it to the Center. Lol
【Please tell me the point of installation and hang (in the case of Hard parts)】
Put the target in Center, Pong.
[Is there anything I was disappointed about?]
Is it expensive?. The price
【Hope for Manufacturer - Please let me know if you have any improvement points]
Variation highest ~. Will not you manage the price anyway?.
【Have you compared items?】
What is wicked on your head.
[Others]
"Is there such a thing?" It is Don Pissha Items.
View detail
Since it had the helmet made, it purchased. It is attachment at SHOEI VFX-W. A string's width is satisfactory if the goods of correspondence are purchased to 27 mm. It was not simply able to attach easily. It was not attached unless it rem
Since it had the helmet made, it purchased.
It is attachment at SHOEI VFX-W.
A string's width is satisfactory if the goods of correspondence are purchased to 27 mm.
It was not simply able to attach easily.
It was not attached unless it removed the metal fittings to which the portion in which the string remained is stopped.
Probably, the direction to carry out time reduction should be attached by all means, since it comes to be able to perform desorption of a helmet simply even if it removes!
View detail
Since the additional purchase of the helmet one-touch clip helmet was carried out, it attached (^-^) Since it decided that it purchased a new helmet since the one-touch clip is using other helmets, he planned to have purchased by a set. Although safet
Since the additional purchase of the helmet one-touch clip helmet was carried out, it attached (^-^) Since it decided that it purchased a new helmet since the one-touch clip is using other helmets, he planned to have purchased by a set.
Although safety is worried, it does not separate from it in something momentum (unless it pushes two places simultaneously).
Attachment is easy and does not have a fear of shifting, once it carries out adjustment of die length, either.
They are items recommended to town riding groups or touring groups (^.^)
View detail
This is always attached to the helmet purchased until now. Once it uses, it will be too convenient and will become indispensable. A stress does not start attachment and detachment of a helmet at all!! The product of texture of a kijima is good, an
This is always attached to the helmet purchased until now.
Once it uses, it will be too convenient and will become indispensable.
A stress does not start attachment and detachment of a helmet at all!! The product of texture of a kijima is good, and for every width of a belt, since the size is abundant, it is not troubled.
This type is attached when an expensive helmet is purchased with much trouble, although there is also a thing with a comparatively cheap price made from a plastic.
It is easy, and attachment is also strong and has no complaint.
View detail