Reviews
Fits: その他 GT-air II, その他 Z-8, その他 NEOTEC II, その他 J-FORCE IV, その他 J-Cruise II, その他 VZ-RAM, その他 CT-Z, その他 SZ-G, その他 F-17, その他 AERO BLADE V, その他 KAMUl-III, その他 SHUMA, その他 RYUKI, その他 EXCEED, その他 AVAND II, その他 A-FORCE RS, その他 G-FORCE SS, その他 FF-COMFORT, その他 A-FORCE RS JET, その他 G-FORCE SS JET
dull
I've tried all kinds of anti-fogging Spray, applying it before riding, during the ride, etc., but in the end it still fogged up.
I bought this product this time and I am very surprised that it doesn't fog up.
I've had this fog Win for so long that I don't think I would have ever needed to buy an anti-fog sprayetc.
When installing, clean and dry the Shield and carefully install it so that no Dust or Garbage can get in between. Surprisingly, it was easy to install.
I've used it every day for a while, morning to night, without the anti-fogging Spray.
Areas with fog WIN do not fog up at all.
I'm going to keep using it and see how durable it is.
View detail
Interference with M30 Clear shield
I used it on my M30 Clear shield and it interfered when raising the Shield up.
I thought I had pasted it too far up, so I tried pasting it at the Limit where it interferes with the bottom, but it interferes with the top again, and it opens to open, but gets stuck.
I thought it was Large sturdy because it managed to open, but the adhesive on the stuck part stuck to the Shield and Helmet and left marks even after wiping.
It is too much of a quandary, so I cut off the part that had adhesive on it due to interference and used it once, although the anti-fogging performance will be reduced.
Clear shield does not remove stains and I am thinking of replacing it.
It really sucks. I want my money back for Gold and Clear shield.
View detail
Fits: Others ASTRO-GX, Others RX-7X, Others ASTRAL-X, Others VECTOR-X, Others XD, Others RAPIDE-NEO
Don't expect so much.
It was expected that the change would not be too intense.
It is not responsive unless it is quite clear. I wish it was a little more responsive.
The response itself is slower than expected.
Well, this is how it is.
View detail
Used on a Simpson DiamondBack. It doesn't fog up.
[How is it used?
Used for Simpson DiamondBack.
Purchased this one because Pin Lock Seat is not available.
Was the one you received as per Image?
There was no problem with the image as it was.
almost [Color] Clear, but it looks like it has a little bit of color when you put it on.
How was your experience with it?
As for the anti-fog feature, it is very good.
It was comfortable to use.
As for visibility, the rim is inevitably in view.
This is somewhat concerning in Simpson, where even free visibility is poor.
It is necessary in winter, but it is better not to have it in summer.
I own another Helmet from WINS and have been using it for about 3 years for commuting.
About halfway through the second year, the surface of the fog WIN deteriorated and the visibility became finely wavy.
Depending on the frequency of use, it may be advisable to replace them once every few years.
Adhesion seems fine and has not peeled or fogged up.
[Points to note]
Since it is a universal product, it is slightly smaller than the Shield.
Given the large size of Simpson's Eye Port, this may still be the limit.
If you put it on the upper limit, it may interfere with the opening and closing of the door, so it may be better to leave a little room.
How did it compare to other products?
Pin Lock Seat is also used on another Helmet.
While new, I didn't feel any superiority between Fog Win and Pin lock.
I thought the durability of Fog WIN seemed to deteriorate visibility more quickly.
Pin lock also had a gap early on and sometimes fogged up even after adjusting the Pin, so I can't say for sure.
Point and hang of installation
If you put it too high up, it is prone to interference.
[ITEMS TO BUY TOGETHER
Shield without pin lock support
[Opinions and requests to Manufacturer
I would appreciate it if it were cheaper so that I could easily replace it.
View detail
dull
It was originally included with the Helmet when I purchased it, but because it had some kind of dirt on it, I rubbed it with Tissue and it got scratches on it.
A littleIt is a material that scratches easily, so be careful when handling it.
The effect is as good as any other Pin Lock Seat.
View detail
Fits: Others ASTRO-GX, Others RX-7X, Others ASTRAL-X, Others VECTOR-X, Others XD, Others RAPIDE-NEO
A little more dimming would be better.
[How is it used?
A friend of mine who uses S Company's dimming Shield raved about how convenient it is; I wanted a dimming Shield with ARAI, so I bought it.
Was the one you received as per Image?
The size and shape of the seat is perfect as it is a VAS-V-specific Pin Lock Seat, and it fits the bumps in the Shield just fine.
How was your experience with it?
It functions perfectly as a Pin Lock Seat.
As for dimming.
Dimming degree ( [Color] (Smoked) is not very dark, so it is not likely to be invisible in Tunnel while waiting for the dimming time (of course, it will become Clear after some time, so no problem).
The degree of dimming is the company's [Color] The Image is much lighter than Smoke, about Light smoke.
I don't think it will meet the expectations of those who want the degree of dimming like in Company S, or for those who want it so dark that they can't see their faces.
Is this due to the dimming Coating? The slight distortion, reflection, and doubling of the Light due to the way the Light enters may be a little more noticeable than Clear's Pin Lock Seat.
The size is perfect because it is an exclusive product, and it looks good because it has good parenthesis.
[Points to note]
Installation is not particularly difficult, as with the OEM Pin Lock Seat, but it is easier if you can help push the Shield open if possible.
The hardest part is not to leave Dust, etc. between Shield and Seat. (It can be cleaned and reinstalled, so even if this is a concern, it seems to be possible to re-ca-Barry)
How did it compare to other products?
The more the dimmer Shield of company S, the more the dimmer ( [Color] (Smoke) is not dark.
Other items that would be helpful
Opinions and requests to Manufacturer
I think this is a revolutionary product with PinLock Function.
Since the product needs to be replaced periodically due to its performance, it would be nice if the price were more reasonable and if the dimming intensity were a little darker.
View detail
Fits: Others J-FORCE IV, Others J-CruiseII, Others J-Cruise
Required for anti-fogging.
I bought this product to try out because it is the same etc. product as the OEM Product. I use it for commuting and touring, so it is an essential product. The material is soft and should be replaced regularly. View detail
Fits: Others X-14, Others Z-7 RYD, Others X-TWELVE, Others XR-1100, Others Z-6, Others QWEST, Others NEOTECII, Others GT-AirII, Others GT-Air, Others NEOTEC
Non-dimmable
It is inferior to even OEMPhotoBlackMick, which is two years old and has a weaker dimming. In the first place, the Shield cuts the UV light, so there is no way the Pin lock inside would react to it. I should have realized this before I bought it.
[Color] Smoke and Color:I would like to try Yellow but only dimming is not recommendation.
View detail
Polarization effect subtle
It's polarized, but it doesn't eliminate the reflection of the Glass in the car.
Blue sky doesn't get darker or anything.
The reflected light was just rainbow-colored and the vision was psychedelic.
View detail
Fits: Others X-14, Others Z-7 RYD, Others X-TWELVE, Others XR-1100, Others Z-6, Others QWEST, Others NEOTECII, Others GT-AirII, Others GT-Air, Others NEOTEC
dimmer
It did not change at all, probably due to the UV Cut in OEMShield.
Melo when exposed to sunlight during breaks. [Color] It was about Smoke, but once Shield was lowered, it was almost [Color] Return to Clear.
I don't think you should expect too much.
View detail
SHOEI X-14 with dimmer Pin Lock Seat
Mistuba Sankowa Pin Lock Seat dimmer.
Installation itself is easy, although it requires a lot of effort.
The view through the Pin Lock Seat appears a bit distorted compared to OEM, which is uncomfortable until you get used to it.
The OEMShield from SHOEI does not allow UV light to pass through, so it does not dim at all.
When I checked the external Shield, I found that the Base is all OEMShield with Mirror processing, so the dimming Pin Lock Seat for CWR-F is completely useless.
View detail
Dimmable? Almost. [Color] It won't be Smoke!
I purchased a dimmer Pin lock, but it only changes to a very light color even under the hot pecan sun.
Amazon's Universal dimming Pin lock is 3 times better.
I was delighted with the exclusive Pin lock, but I am disappointed.
I will see if I can return it now.
Everyone be warned, it is about half the density of Mellow Smoke.
View detail
Fits: Others J-FORCE IV, Others J-CruiseII, Others J-Cruise
I shouldn't have expected too much.
I was attracted to the dimming function of CJ-2 for Shield by J-Force?
I was somewhat prepared for the delivery time as they were out of stock, but ・・・・・
The actual delivery time took two months and ten days due to every delivery postponement.
I had high expectations based on the product description, but I feel like I've been completely shattered.
First of all, the thickness of the product itself is too thin.
Compared to the OEM Product is the impression of a much thinner Pe LePera.
When I adjust the pin lock, the pin lock is wrinkled.
Still, the tension was put on and made to adhere closely...but it is an uneasy area.
And the dimming function, which I was expecting the most, is disappointing to say the least.
I exposed it to sunlight for 10 minutes on a sunny day, but it was only slightly purplish.
It is thinner than OEM Light smoke.
I am sure I was expecting too much, and I am disappointed with the touted message.
Moreover, the field of view is distorted, probably due to the thinness of the tip. I guess it does not bother me while driving.
It is intended for nighttime use and for wintertime use when days are short.
View detail
Fits: Others X-14, Others Z-7 RYD, Others X-TWELVE, Others XR-1100, Others Z-6, Others QWEST, Others NEOTECII, Others GT-AirII, Others GT-Air, Others NEOTEC
About the same brightness as Mellow Smoke.
Even under the hot sun, it only turns to Mellow Smoke. I should have bought PhotoBlackMickShield even though it is 4 times the price. View detail
Buy Repeat.
Previously, the Ally Light Smoke + Pro Grip Clear I had installed it with Lapide SR's Standard Equipment's Clear Shield with Progrip Bronze Mira combination. As for my impression. Ally Light Smoke + compared to the Progrip Clear I feel that visible light is reduced well because of the mirror shield. Even when looking directly into the sunlight, this combination is less glaring than the previous one. I think it is a good combination. I bought this shield to use the one I have left over this time, but I also considered using the mirror shield of Other Brand Product. I also considered mirror shield of Other Brand Product. However, the shield itself is easy to peel off, so I decided to use the outside of the shield as shown in this article. Mirror processing on the inside of the shield I think this combination of shields is more durable. The price of the Other Brand Product processed shield is about 8,000 yen, and the OEM Shield + Progrip Mirror Shield Pro Grip Mirror Shield I think this combination is more economical. View detail
Fits: Others YF-9 ZENITH SportsStripe, Others YF-9 ZENITH Pinstripe
easy to read
The Visor should be spread out until it is completely flat. View detail
Just a clear base. [Color] Not Clear.
It is only a clear base, but it contains a thin layer of pink, so it is a little dangerous to drive at night.
The dimming function is also not Large.
The ultraviolet rays change to Blue, so my face did not get hot from the sun, but the glare was the same.
I bought it because it had a dimmer function and Ideas was good, but I think the price is more expensive than other Pin Lock Seats, and I don't think I will buy it next time.
View detail
It's rather solid. Slightly transparent when bright?
Screen can be changed in less than 5 minutes. It's a little transparent when it's bright, but I'm generally satisfied. View detail
Pin lock.
I use AGV K5 S.
Shield was just getting WoundWound.
Due to unavoidable circumstances (laughs)
I scratched the shield on Asphalt surface and replaced the shield.
I didn't get the pin lock because I didn't know when it would be delivered, so I installed the one I've been using for a while, but hmmm, the pin is in the wrong position and I can't reach it (lol)
So I decided to go for the fog-in, which was recommended by Seiho.
There's an adhesive side to stick it to.
With pin lock, it gets more and more subtle (laughs).
I feel like this is better. Mm-hmm. (laughs)
I just put it on and will try it again and report back on how it works.
View detail
very good
I've installed it on my OGKCUBtShoeoma.
It was a Review like Pin Lock Seat itself is not good or Pin Lock pin is broken.
I am also satisfied with the fact that the anti-fogging effect is preeminent and can be reapplied if it fails.
View detail