Reviews
If you are interested in Helmet's Size, you can find it here!
Best of all, it is inexpensive!
This Sponge can be cut as well as pasted, so the size can be adjusted by pasting it on the part of the Helmet that you are interested in.
In my case, the size of the Helmet I purchased was a bit Oversized.
We were able to match them beautifully.
Many modern helmets allow you to adjust the interior, but you can use basic subtraction to make some of the interior Sponge "Unplugged." Because it takes shape,
A little tighter..." If this is the case, there is no other way but to replace the interior.
I think it is possible to try this product for a while before that.
View detail
For X14 Interior Repair
After washing the interior of my X14, the Sponge on the top of my head was falling apart, so I bought this product FOR REPAIR.
Cut the missing sponge part to a large size, and cut it further so as not to block the air hole part.
Attached to firing Styrene on HelmetBody.
You can easily cut it into any shape you want with Scissors.
The original Sponge was sagging, so even with 6mm thickness, the Fit feeling seems to have improved.
View detail
I chopped it up and used it.
I could have used it as is for the interior of the GT-air, but there are many gaps, so I cut it to fit it. It fits well on my head and is much more comfortable to wear. View detail
To adjust the size.
It is just right for Helmet Position adjustment, easy to use! View detail
Adjustment of loose helmets
I bought a helmet of a size that was easy to put on, but I found that it did not fit my head size, so I bought this one.
It is a universal product, so it is not perfect, but the Inner Pad fits tightly to the head and creates a sense of envelopment.
WeBig would be happy to be able to provide FittingService for Helmet.
View detail
Worth a try, for fine tuning, before replacing the interior.
It is said that the best way to select the size of helmet is to try it on, but the best way is not to try on a new helmet, but to try on a helmet that has been used to some extent and the interior has become accustomed to it. (Hetero) The condition would be desirable, but then I would have to try on the ones of people I know, and the MODEL I want is not always available. In general, helmets are not replaced that often, but the interior will always be worn out. Even if you choose a tighter fit when it is new, it may become looser than expected. In my case, with ARAI, I am JUST an XL when new, and an L is too tight, even assuming interior Downs. But I am an ARAI believer and have 4 Helmets, all ARAIRX7. I have 4 helmets, all of which are ARAI RX7, and I use them according to the motorcycle I ride and the wear I'm wearing at the time, but I still have a bias in how often I use them, and even with the same model, there are differences in fit. I like RX7X Kiyonari Birdco, which I have been using frequently recently, but when I ride Panigale, which has a tight forward lean, sometimes it becomes forward leaning, so I thought about changing the ARAIOEM System interior from the standard 7" to 10", but it is made-to-order and the delivery time is 3 months! The price is also about 4,000 yen.
So we decided to try this product anyway.
Result? ... ・ Except for the cheek pad, the fit is considerably improved, but not too tight. It is also less likely to drop forward. The only thing left to be seen is how long it will last, but since it is inexpensive, I will replace it if it gets loose again. I bought two of these for other helmets as well.
Easy to install. Kitchin and Quantity:If you set the double-sided tape, the adhesive will not shift in some places. It may be better not to stick the double-sided tape too tightly, considering the possibility of positional adjustments or replacement.
In the case of RX7X, the air inlet hole in the center is covered, so we cut that part only.
I would recommend this to anyone who wants to regain the fit of their favorite helmet that has become a bit loose.
It's worth a try.
View detail
Deodorant effect and sweat absorption effectLarge!
When touring in the summer, sweating and the smell of sweat make the inside of the helmet smell very unpleasant. The Helmet liner that I installed this time is not only deodorant effect and sweat absorption, but is also good because the hairstyle does not fall apart too much. It is also a high cost/performance product. View detail
ROUGH&ROAD Helmet Spacer
I bought this "spacer" to raise the seating height my Shoie GT AIR. I would have view issues when I would ride at high speed or leaning into the corners. By raising the way the helmet sits on my head, I could see more. It worked well. Then I bought the new Shoie NeoTecII and JCruise. Strangely enough, I believe that Shoie changed the sizing on their helmets as both helmets fit fine in the cheekpads, but loose around the cranium. I took my ROUGH&ROAD Helmet Spacer and installed it in my J Cruise and the helmet now fits fine. I might have to buy XL helmets in the future, but right now, I'm sweet thanks to this product. View detail
Not cheap though
Since changing the Helmet, the shape of the interior of Helmet is attached to the hairstyle as it is, so I bought it for prevention. I think that it was good because it became difficult to type. View detail
Helmet perfect fit Fit ♪
SHOEI's Off-Road Helmet "VFX-W" I used this product for M Size.
When I was continuously running long in the off-road, I noticed that Helmet's interior paddle was getting wet with sweat, and gradually the Helmet's Front was slipping downwards.
But, S Size feels that it's too small, and you can try replacing it with a new gold quota - - -
So the off-road companion taught us this product.
If it is this price, even if I fail, I feel like giving up, so I bought it!
There are things of 6 mm thickness and 10 mm Thick, but purchasing 10 mm Thick by Cut with Scissors and easy adjustment.
First I removed Helmet's interior pad and tried applying this item.
There are six legs radially extending and there are particularly long legs by 1 pc. It seems to be basic usage to set this to come to Helmet's Rear. I also did so.
Try fitting all interior Pad of Helmet back.
Because I did not cut one place, I wonder whether it will be too tight - - I thought, but I was happy to have a good feeling with a single shot.
Then disassemble again, peel off the Tape of this product and pasted it. Six legs stuck to the periphery so it was hard to paste slightly, but in the end it could be pasted without problems.
After that, she suffered 100 consecutive minutes at Enduro race, but Helmet did not go down as usual.
Also, though I thought that I had a headache when I had a hard time with Size, fortunately I was durable with Large.
Very cheap, I was able to easily make Helmet to Exitly Fit myself ♪
I appreciate my friends who taught me.
Recommendation!
View detail
Fine adjustment of Helmet
Purchase Helmet's Size fine adjustment.
You can fine-tune Size if you get a little Large.
The price is reasonable and texture is satisfactory.
There are also two types of thickness Please purchase according to the application.
View detail
It will not be a Mohawk
There is a groove in the inner parietal part of SZ - RAM 4 so that air can pass, but as long as I am wearing short hair, my hair does not go to sleep there "Petit Mohawk" Become.
By attaching this, it will not become a Mohawk.
It would be nice to wear Inner Cap, but it became troublesome and found this product where I was looking for a substitute Mohawk countermeasure article.
Although it has nothing to do with the original use, people with similar troubles can try.
View detail
The width of my helmet was just good size.However, sometimes I felt pain in my ears by being compressed because the depth of my helmet became a little bit deep.I was released from the pain and pressure of my ears after attaching this spacer.
The width of my helmet was just good size.
However, sometimes I felt pain in my ears by being compressed because the depth of my helmet became a little bit deep.
I was released from the pain and pressure of my ears after attaching this spacer.
Thanks to this strange shape, it was easy to attach to the curved parts.
I attached it not to close the air intake by cutting the sponge.
It is a very recommended product.
View detail
[Webike Monitor] If covered with the Helmet, does it come in sweat? It was found while looking for some in good goods there, and it purchased instantly and attached. It was the Exactly. attachment was also easy, and it wears and is ref
[Webike Monitor] If covered with the
Helmet, does it come in sweat?
It was found while looking for some in good goods there, and it purchased instantly and attached.
It was the
Exactly.
attachment was also easy, and it wears and is refreshing.
View detail