Reviews
Yellow color….
I bought it because I wanted to use Bubble shield from that era for a long time!
Nostalgic!
But I wonder if the spit is Design-like….
but this does a good job!
It was wonderful to be spared the sun and gain distance to Shield!
The reflection and distortion of the view is minimal for a Bubble, and the moving parts have a firm Click feel. It will be easy to use once you get used to it!
Only the color is shihai!
Daytime, Color:Yellow is dazzling!
View detail
Too expensive
Purchased based on the photo alone. The real thing is quite flashy. The environment is sunny and cloudy regardless. Glaringly Sensitive." is awesome. Tastes differ, but I personally think that Silver's [Color] I regret that I should have bought the Smoke one. 。 Still, the delivery time was slow and the price was high. Cost performance was not good.
Lastly, the durability of the coating on the surface remains a concern. According to the instruction manual, maintenance of stains is OK only under running fresh water. I wonder how long it can be used ….
View detail
![Shield [for RX-200R].](https://img.webike-cdn.net/catalogue/images/78742/RX-200RS_TS.jpg)
About Dark smoke
I use a Bell Helmet when I go Touring, but I use a LEAD Industries Helmet when I want to ride Motorcycle in a Showa era atmosphere. If you ride at night, you should definitely not use Dark smoke. It is quite dark. It is nice and not glaring in the mid-summer sun. I can also recommend it to people who don't want to show their faces. (Laughs) View detail
First Bubble shield
Purchased for color, the color alone is great, easy to see both day and night.
However, the inner reflection is quite noticeable and the pores on the nose are enlarged due to the shape.
I would like to see an anti-reflective method on the inside.
It is quite hot in summer without much wind inside.
View detail
Visibility is No.1
The vision is like the naked eye with no inner reflections and with color. It is at the same level as the naked eye with color.
However, the driving wind is also at the same level, and it is very windy to the eyes.
View detail
The density is moderate.
[Color] With Clear, there are times when it's just too dazzling. [Color] Changed to Smoke.
It is also reasonably priced.
I'm thinking of using it at dusk, too, in the middle of the day. [Color] Smoke.
It is not intended to hide the face, so it is moderately thick.
View detail
Difficult to use with eyeglasses.
Limit by the reverse playback of wearing the helmet when taking off the helmet, since it is not possible to wear glasses after putting on the helmet. [Color] There is only Clearance that can be Clear.
I prefer the Shield in Champagne gold with a bit more Mirror.
This color is cheaper than the others and I bought it with the points I saved so I will use it exclusively during the cold months.
View detail
unavoidable choice
Since Yamaha's Helmet is inexpensive, it is a step below ARAI and SHOEI. Still, they are very good in terms of ease of use. That is why I have been using it as SecondHelmet for a long time. My favorite is the YJ-5Series, which I have replaced three times and still use with a new interior and Shield. However, it was time to replace it, so I bought the latest YJ22. However, the fit was not so good, and I felt that I could not use it as a SecondHelmet. So I had no choice but to buy a YJ20. The reason why I had no choice but to buy the YJ20 is because the anti-fogging Shield, which is the "selling point" of the YJ20, has the advantage of being "anti-fogging" but also has the disadvantage of being "anti-fogging". Not durable." The Shield's anti-fog coating would deteriorate and become useless in less than a few years.
The Shield is always replaced with the Option Smoke Shield instead of the OEM Shield. I really wanted to get the DARKSmoke Shield, but only the Mirror Shield has no anti-fog function. So I bought this one, thinking that the anti-fogging function would not deteriorate.
Install the Mirror shield received from Webike as soon as possible.
Installation is easy, but it is necessary to read the Instruction Manual properly and raise the Shield fully up. Pull the knob completely. If you don't do these two things properly, you will break the mounting.
I'll try to wear it as soon as possible. [Color] The Smoke Shield of Yamaha's Helmet is traditionally thin, but this one is also thin. The conventional Smoke Shield is blackish in color. [Color] If it is Smoke, then this Mirror shield is an Amber-based [Color] It is Smoke with Brown tint. [Color] It is Smoke. It is an amber coloring often used in the WindowGlass of European cars in the past.
In the evening, instead of reducing visibility, they do not provide much protection from direct sunlight.
It is glaring when looking at the sun, so you will feel glare when driving toward sunrise or sunset.
For durability. No anti-fog." I bought a Mirror Shield from Yamaha, but actually the Mirror part peels off easily and the durability is not so good. I wish Yamaha would release a "no-fog" Spec. Smoke Shield and also lower the price.
View detail
Fits: Others ASTRAL-X, Others RAPIDE-NEO, Others RX-7X, Others VECTOR-X, Others XD
Green Light [Color] Smoke
I guess it's a little hard to see on the pass.
I like the Semi-smoke.
View detail
Good visibility with minimal distortion
Surprisingly good visibility with little distortion, but on the other hand, the reflection of one's face is strong and makes nighttime driving uneasy. The length is a little short, plus the quantity:Pair (for Left and Right) Wind cutting noise and eyes dry out at high speeds due to wind entrainment from the gaps in the View detail
Flash mirrorColor:Buy Yellow
Flash mirrorColor:I purchased Yellow, but the Mirror feeling was Zero.
If you want to hide your face, you should choose another color.
View detail
First Bubble shield
Purchase at the same time as the company's Jet helmet
This is my first Bubble shield.
This is my first time, so I don't know about other companies' products, but I think there is a little distortion.
But maybe this is how it is.
It doesn't bother me that much.
Even at night, it doesn't feel so tight.
As I mentioned in the Helmet Review, I feel a little thoughtful when I attach it to the Helmet.
View detail
I was able to use it for AraiClassic.
I put it on my Arai Classic. I was able to install it without any problems, but the Shield is too stiff to move up and down. You may want to use silicone oil or grease to break it in before you install it. However, it may be that the accuracy of the Button part of the installation was bad by chance only for the one I bought, or it may be that it was just incompatible with my AraiClassic by chance.
I've heard that some bubble shields can distort the view, but this shield didn't bother me. I chose the Clear type because I do a lot of night riding. I think it's inexpensive, so it might be good to have several types depending on your mood and conditions.
View detail
JAM The reinforcing Suction Cup is used exclusively...
First of all, when I bought it, I did not expect the stiffness like ARAI or SHOEI products from the price.
I chose LightGradation blue for the flash mirror, but it looks more like light smoke than gradation, and moreover, it looks more like normal light smoke than blue, is this the manufacturer's standard or Naming? Certainly? But it is the original [Color] Smoke looks like it feels much darker.
There is little distortion and it is easy to see well, and there is no sense of eye fatigue.
The impression of the lack of rigidity as shown in the comments of the past evaluators is unavoidable because the thickness of the Shield itself is thin. However, there is accuracy that is not bad considering this price range, and the impression changes completely by adding the following Parts.
I installed a JAM specific reinforced Suction Cup on both ends of the Shield installation.
With this Suction Cup, the Shield itself has been given a more solid feel, and the usability has been improved. Also, it seems to have been improved to prevent sudden opening and closing on the highway by installing a locking snap.
I tried to run near the speed limit in the highway test section of the new Tomei, but I was able to use it comfortably without any particular problems or troubling scenes.
Anyway, it can be opened and closed, and when the sun is low in the morning or evening, it is possible to prevent sobriety with the eaves, and it gives off an old-fashioned atmosphere with ease. It becomes the form of Helmet that suits Machine.
I thought it would be a good idea to have one of those Helmets that have an atmosphere that allows you to run around town with ease.
It becomes the atmosphere of Helmet that suits especially W, ESTRELLA, and SR GB system Machine well.
Recently, the JAM Helmet has come in handy when I go out after changing the Shield.
View detail
Will not fit BELL's CUSTOM500
I think the thing is good work.
But unfortunately, CUSTOM500 can not be used for 5 points.
Because it is a Helmet of a foreign thing, it is inevitable.
I was reminded that the 5-point stop Shield will likely not stick unless it is OEM.
View detail
![Optional shield [for reise]](https://global.webike-cdn.net/photo/impression/60/60379c40d5b3e1a74e83587f1d7e909dL.jpg)
First Mirror
LEAD's Shield for reise (REIZEN) is available in Silver mirror or Standard Equipment. [Color] Two options for Clear.
Ever Soft (semi) [Color] I've never used a Shield thicker than Smoke and was happy enough with that, but the price was cheap enough to give it a try.
Well, I'm impressed that the glare is reduced and I can't even see my face at all.
Just install the Quantity:Pair (for Left and Right) It's a little difficult to adjust the position while matching at the same time, but it won't be a problem once you get the hang of it.
View detail
It's pretty dark.
The NORMALShield on the Gringo S was a clear type. [Color] I also bought Smoke.
The construction is a little different from the included Helmet Shield. It has a built in well print, and the color of the button is like Brass. But it is not impossible to install it and it is not inaccurate.
Moreover, since there is no surface treatment, etc., there are no small scratches that stand out.
But it's especially common in North American products. "Too dark [Color] Smoke is still alive and well, and it's also quite dark. You can't drive on country roads at night, I'm afraid.
The eyes are hidden and very good Parenthesis, but it is difficult to use it for the purpose of running at night in the countryside, and in the end [Color] I put it back on Clear.
View detail
sunny day only
As others have implied, it peels off quickly in the rain
I failed twice
The first time I bought it again because I had left it wet and thought it was inevitable The second time I wiped it off immediately after it hit the rain, but it was already too late
ARAI's Mirror shield for Pin Lock Seat is superfluous because there aren't many of them It's a shame to
I don't think I'll ever buy another one
View detail
It's cloudy…
Unlike the old competition shield, the 3D shape of the shield hides the chin when viewed from the front! However, because of this, the part where the breath hits the helmet will inevitably fog up It can be managed while driving because the air is released, but what about the fogging after stopping or putting on the Helmet? There is nothing you can do about it You will need to be careful, especially if you use glasses Personally, I prefer the Board Competition View detail
It is the second purchase.
I bought it once because I wanted a Mirror shield, and I was using it when it rained I wiped the Shield on my Gloves and had to repurchase it
It's a Miller coat from OEMShield so installation is no problem
Color:Blue Smoke is also easy to use, with no distortions or discomfort in vision There is, and it's just fine for me, as I'm a Main in the morning and during the day
If I want to be extravagant, I wish the Miller coat was more durable (in the rain) When I wiped it with my Gloves, it turned into blue powder and flaked off (^^;;)
View detail