Reviews
I am satisfied
Semi-smokeGold
(before a negative form) (not) at all [Color] The color is clear, bright, and appears close to that of the naked eye, which is what I expected.
ARAI is also systematically installed, and anyone can easily install it once they get the hang of it.
View detail
Very good service, a genuine Suomy dark smoke visor. View detail
Satisfied
I can't see the Mirror's face.
I am satisfied with my purchase from
View detail
![[Helmet Optional Parts] Pin Lock Shield S-15](https://img.webike-cdn.net/catalogue/images/79595/S-15_pin_lock_shield_mirror_sil_TS.jpg)
Affordable price
Visibility was good, not too dark and not too light. View detail
Cool
Used to replace a scratched and tired Z-7.
Mellow [Color] I purchased SmokeSilver.
Although the face is slightly visible from the outside, [Color] It looks better and cooler than Clear.
The visibility is Mirror, but it is not that difficult to see, and you want to be able to see well at night! It is a recommendation for those who want to have good visibility even when driving at night.
Mellow [Color] It's Mirror with Smoke, so it's quirky. [Color] Note that it is inferior to Clear,,
View detail
Mirror works better than expected.
It was a good decision to Base Mellow Smoke.
Visibility is a priority for Blue (Yellow color vision) so I could run at night without anxiety.
The sun makes the face appear transparent, but depending on the surrounding environment, the Mirror will be in full effect.
I am satisfied with the balance with visibility.
View detail
Blue is this color.
I purchased Titaniumium blue in Semi-smoke.
I like that it is Mirror so it is hard to see the line of sight from the outside.
[Color] Because it is Smoke, it seems to look a little dark at night, but it is not a Level that is particularly bothersome.
I think it would be better to refer to the ManufacturerHP, as the appearance seems to vary quite a bit with respect to the exterior color.
However, it seems that Blue and Orange are reversed on webike's product page compared to the ManufacturerHP ….
View detail
Fits: Others GT-Air II, Others GT-Air, Others NEOTEC
Image differs from the image.
Buy Titaniumium blue
From the inside, the color is not as blue as the picture, and there is almost no color at the center.
From the outside, you cannot see the face from both ends because of the Mirror effect, but you can recognize the face as it fades toward the center.
I'm a little disappointed because I was expecting an overall Mirror!
View detail
It is the best cospa
Nothing to complain about. It is a safe Brand. View detail
Is good
Visibility is good day and night.
The wind is rather blowing.
The rain doesn't get in your eyes, but it does get you wet from the nose down.
I put it on instead of Sunglasses and it is fine.
If you want to protect it from wind and rain, it may not be enough.
View detail
Blue mirror shield gives a slightly yellowish field of view.
[How is it used?
NORMAL is a clear shield, and although I feel that the parenthesis is bad, a darker Mirror shield would interfere with nighttime driving, so I decided to use a Semi-smoke Mirror shield.
Was the one you received as per Image?
I was worried that the color would be lighter than the Image and that it would be visible in its entirety, but when I installed it, it fit perfectly and was a good parenthesis.
Was the installation difficult?
It was easy to replace it by referring to videos on youtubeetc.
At first, it did not go well because I did not understand how it worked, and I had a little difficulty until I learned hang.
How was your experience with it?
The field of vision is bright at night with no problems.
The cheap Mirror shield is [Color] I was worried about the darkening of my field of vision with SmokeBase at night, but this Shield works perfectly fine.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
During maintenance, there are a few troublesome points such as running dirt under running water to prevent Coating from peeling off when cleaning.
▼ Many people say that Coating has peeled off quickly due to rain, etc. In my case, I wipe it off with neutral detergent, but so far I have been able to use it without any problems.
View detail
Mirror shield is the only choice!
I bought the same one because the Mirror coating was bald when I was running while wiping Shield on snowy Bandaiyama.
The only drawback is that they are prone to baldness if rubbed when wet, but they look cool and reduce glare during the day.
We also appreciate that the OEM Pin Lock Seat can be installed.
Mr. Yamashiro, Tour BlackV has been released, but there are still many Tour Black3Users out there, so please continue manufacturing!
View detail
New and feeling Refreshing
The Helmet Shield for CHOINORI was damaged, so it was replaced with a new one.
It is easy to install.
View detail
The product is of good quality and works well. View detail
As expected
[How is it used? 1.2 times a week
Was the one you received as per Image? Street Image
How was your experience with it? As expected from an OEM, it is perfect.
[Points to note] I'm afraid of shifting the Goggles and driving away, as if they're going to fly away.
How did it compare to other products? Nomination Purchase.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
The Helmet will make Parenthesis even better!
[Base color [Color] Clear
Mirror coating color Titaniumium silver
BaseShield is fine with OEM; OEMPin lock can be installed, of course.
Clear base, but you can't see my face and it's not too dark. As for my usability, I am very satisfied with this product.
View detail
![[Repair/Option Parts] Shield for MNF1 END MILL (End mill)](https://img.webike-cdn.net/catalogue/images/63665/12_MNF1_END_MILL_TS.jpg)
Fits: Others For MNF1 END MILL
Atmosphere at a low price.
The Helmet is a low-priced but chic and well-designed helmet, but the interior and other aspects felt price-approved. [Color] I recommend Smoke because it covers that little concern and is cooler than anything else. [Color] Smoke, so naturally [Color] It is hard to see compared to Clear and also other companies' [Color] Compared to Smoke, the impression was pleasantly darker. View detail
Good visibility
No installation or visibility problems due to OEMQuality.
Smoked red, but the Shield is closed at night except in residential areas where there are a few streetlights.
From the inside, it's normal. [Color] It may be similar to Smoke.
I've been watching other people's impressions of the Coating peeling off, etc., so I try not to touch Shield too hard, so it's been about 6 months and so far I haven't seen anything wrong.
View detail
Repeat purchase.
The VESPA Jet helmet does not have an Inner Shield built in, and when I was using it with this Shield installed, I inadvertently damaged the front of the Shield, and the wound was in my field of vision, so I bought a repeat pair to replace it.
Our favorite for daytime use only. "Light smoke" to the
Chin guard converted from Harrison, Harrison Chin guard (Old model) The surface of the "K" was worn out with age, so we prepared the surface with Sandpaper, and painted and rebuilt it with leather paint.
This Shield, personally, is more than Over Glass or Co-GRU. (against flying objects) I think it gives me a sense of security, and when combined with the Chin guard, it provides insect protection to the lower half of my face, and I now use it most frequently among the helmets I have on hand.
The Jet helmet with the Inner Shield built in looks Refreshing! On the other hand, this Shield may divide opinions, but personally, I think it looks good on Bobber style or Cafe racer.
The best part is that they are reasonably priced and can be easily replaced if damaged.
View detail
Countermeasures against the west sun
It is mounted on a LEAD APRETJet helmet.
I have been using Smoke Shield for a long time because I still get dazzled by sunlight when I run during the day.
This was my first LEAD product and it was pretty dense. [Color] It's Smoke, similar to Company A's darkest, until now, in the evening. [Color] I had replaced it with ClearSEEDle, so I thought it was a good idea, but to my surprise, the SEEDle could not be removed and attached with one-touch, so I had to remove the Screw and replace it.
Well, it's OK because it doesn't take more than an hour to do the work, but if you don't replace the parts before dark, it will be a problem if you drop the parts on the road.
View detail