Reviews
Mirror is quite thin.
Installation is very easy and requires no special tools.
Mirror is quite thin, and before installation I can see right through their faces." However, when used outdoors, it seems to be surprisingly translucent.
Color:I chose Sky Blue, but the vision is yellowish.
It is uncomfortable at first, but eventually your brain compensates and you don't care.
but the visibility is still NORMAL. [Color] Compared to Clear, it falls off. It feels much darker, especially when entering Tunnel.
I knew that, but it seemed darker than I had imagined, Visibility." is -2
Also, the Shield is now hard to raise and lower. Quality and texture was set to -1.
View detail
good
Color:Yellow was purchased.
It could have been a little darker for daytime use.
Night visibility is good.
When installing the helmet, there was some rattling depending on the type of button on the helmet side; inserting the aluminum tape eliminated this rattling.
The included ProtectionRubber was too thin to fill the gap.
It comes in when it rains.
but it was comfortable and not foggy. I think the gap served as ventilation.
IncomeI put it on, but there is some wind roll in from my chin and noise in the Microphone.
View detail
Quantity:Set purchase is recommended.
I think it is good because it is dedicated to this product. The quality and functionality are just as I expected, and I have no complaints. View detail
Generally looks good, but a little distressed.
Fitting is perfect. It installs without any problems and looks kind of beautiful.
Blackness is equivalent to Semi-smoke, not Light smoke by ARAIHelmet standards. The face is almost invisible from the outside. It is good during the daytime and visibility is good. [Color] Clear and calm driving.
However, in the tunnel or after sunset, although it is not dangerously invisible like ARAI's Dark Smoke, it is often difficult to see, and one unconsciously raises the Shield.
View detail
LEAD Industrial Optional shield Color:Gray
I purchased this as a ReplacementShield for White/Red for ApeRate.
The standard is [Color] I replaced it with Fashion because it is Clear,
I like it because it looks like Visor when the Shield is splayed all the way up.
View detail
Good cosmetics! Good accuracy!
I was looking for a Bubble shield that could be installed on my commuter ARAI Classic Air, and I found information that this product could be installed and purchased it.
As I am getting older and less confident in my night vision, I gave up on Light smoke, which I prefer in appearance, and went with Flash yellow, and this was the right choice as I can easily see the unevenness of the road surface in the dark at night.
The quality is high and the assembly was easy.
Another great point is that this type of bubble shield comes with a pad that fills the gap between the helmet and the shield to prevent rainwater from dripping through the gap in case of rain.
The movement may be a little stiff when trying to upload the Shield, but this may be due to the high precision of the product.
Spraying a little Silicon Spray on the working parts will improve the movement.
In general, I was more than satisfied for the price.
Since Shield is a consumable item, it has a high cosmetic value that can be easily replaced if it gets scratched!
View detail
I still prefer OEM Product.
Was the one you received as per Image?
ManufacturerOEM Parts are all in good shape and quality.
[How did you feel about the Fit?
No problem.
How was your experience with it?
It works perfectly fine.
Incidentally, we also tried a counterfeit product manufactured in China, but the height and thickness of the Shield were slightly different, so the Shield was not closed properly and Wind Cutting sound came in.
What are the specifications of the product?
Clear shield and Pin Lock Seat can be installed (Pin Lock Seat is not included)
[Was there anything that disappointed you?
Gold amount is high and Pin Lock Seat is not included.
How did it compare to other products?
There is no comparison.
Other items that would be helpful
Opinions and requests to Manufacturer:Please enhance the sales of parts in JapanFOR JAPAN MODEL.
View detail
Blue is easier to see.
[How is it used?
I used it for commuting and touring, so this will be my Impression of it.
The hats used are RX7-X and AstroGX. The same VAS-VShield can be used for both.
In this case, Semi-smoke×Blue was selected.
Was the one you received as per Image?
It was just like the Image, this is my second ExtraShield and I bought the first one in Semi-smoke×Gold.
Neither the Gold nor the Blue shield I purchased this time has yet to show any peeling of the Mirror coating as reported by other impresarios.
How was your experience with it?
In Semi-smoke×Gold, while it has a very high anti-glare effect during the day and has the Merit of being the most transparent inside of Semi-smoke and not being able to see the face, it is difficult to see in the Tunnel or in dimly-lit Timing, and the Level is not useful at night.
Therefore, in this issue of Color:Select Semi-smoke×Blue, which has a yellowish appearance.
No anti-glare effect can be expected. Ordinary semiSmoke Shield has better anti-glare performance.
The visibility is indeed a yellowish vision. This is very easy to see.
Contrast is clearer, so it feels really easy to see. I have also used it on night roads,
It was not difficult to see on streets with streetlights or on main roads, and I was able to drive without anxiety.
However, it was indeed difficult to see on roads with few streetlights. Still, it is much better than GoldCoating.
[Points to note]
Mirror coating seems to scratch easily, so it is better not to scrub too hard.
Also, you should not rely on the way the product looks in the product image or on the Manufacturer's website, as they may have incorrect notations.
How did it compare to other products?
In fact, I also purchased Semi-smoke×Red, which was the best.
All of this is in Semi-smokeBase, but Red is more visible at night and in Tunnel than Gold,
Red is recommended if you want to use it for Almighty because it is more anti-glare than Blue.
Gold for those who aim for an anti-glare effect or want to keep their faces out of sight.
If visibility is a priority, Blue is recommended for Circuit driving, etc!
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
moderate [Color] Smoke
Especially in the summer, from the prevention of eye fatigue and designability. [Color] Smoke was selected. My personal impression is that the center line is not lost even in the Tunnel, and the blackness of the Tunnel is just right. [Color] I think it is Smoke. The photo shows a comparison of the inside of the Shield with and without a white paper placed inside the Shield, and with about 1 meter of frontal light shining on the inside of the Shield. During the daytime, the inside of the Shield was not fully visible through the Mirror because of the Visor's shadow.
Also, the curvature of the Shield is Large, so distortion is a concern, but it was not a concern with this unit.
More importantly, the reduction of outside light that I expected from Inner Shield is only (I would) recommend using this product only in true backlit situations, as the distortion of the Shield is a painful Level when used for long periods of time. In that sense, I think this product is effective.
View detail
Looks as good as expected
Buy Blue in Semi-smokeBase.
The color of the look is beautiful, just as I expected.
I wore it and actually saw it running, and the visibility [Color] Clear and no problems.
Mirror coating peels right off." I have not experienced such a problem with the one I purchased, so far.
View detail
Lost me with Dark smoke.
After much deliberation with Dark smoke, I decided to go with Merrow because of the nighttime hours.
The Mirror effect was also mellow and hard to see from the outside, so mellow was sufficient.
It is visible even at night and is recommended!
View detail
![[DIN MARKET] 3-Button Flip-Up Shield RT-1N SHIELD](https://img.webike-cdn.net/catalogue/images/94437/0720150930_60f6689a6c963_TS.jpg)
Can be attached to ARAIJet helmetS-70
The visibility is good with little distortion, but when the Shield is lowered, the wind entrainment is so great that the wind received feels stronger than without the Shield. View detail
First time! Bubble shield
I think it is good. As for myself, I am satisfied!
At first [Color] I thought Smoke might be too dark. I thought so, but when I actually put it on and ran, it didn't bother me that much.
View detail
Good job on the brim.
There is no distortion at all in the Shield, so much so that I forget I am wearing it.
And the brim is good! Is such a small protrusion useful?
but it helps reduce glare.
(It's not possible when the sunrise or sunset is right in front of you, though.)
View detail
I was able to install it on my Arai ClassicAir.
Moving parts are a little stiff. A cracking sound sometimes occurs near the moving parts while driving. View detail
TIGHTLY installed!
Color as nighttime visibility:Buy Yellow.
The 3Snap for mounting is also tight and can be mounted securely.
When Shield was raised and lowered, there was also a clatter of clacking and opening angles so far.
I have not yet driven with it, but I think it might be less wind-induced since it can cover the lower part of the nose when the shield is down.
The Shield surface has a smallest protective seat attached to it, but it does not seem to affect visibility even if it is left as it is, so we will consider using it as it is for a while.
I was able to purchase it for a little over $2,000, which is an amazing level of satisfaction for me!
View detail
Finally found it.
there is nothing to match
I finally found what I was looking for in so many ways.
View detail
Good visibility and no complaints during use.
I have not experienced any drawbacks while using it, and I have not experienced any lifting of the Shield at speeds below 80. However, if I raise the Shield while walking, etc., it falls down quite a bit.
In terms of glare reduction, direct sunlight on the Shield portion is usually glaring, I think it is reduced, but if it is daytime only, another color might be better.
At night, the white lines etc. are drilled so it is easy to drive.
The price point is superb Shield. On the other hand, the most frustrating point is that the HelmetBody options are only Button-type with the same shape.
View detail
Mellow Smoke/Blue Mirror
[How is it used?
I use it for daily use and touring.
While considering the Mirror shield because the OEMClear shield could not withstand the sun from directly in front of me, I chose the Mirror shield because I felt it could somehow withstand the darkening of the sky when I unexpectedly came home late.
Was the one you received as per Image?
I searched the Net and saw that the Mirror feeling was not strong, so it was to be expected.
How was your experience with it?
The view from the inside looks yellowish, but I can use it without any discomfort. It is not recommended by the manufacturer, and it is my personal opinion, but it was impossible to use it in an old, dark-lit tunnel, but I was able to use it in a modern, LED-lit tunnel. In the city where there are enough street lights, I could manage to go at night. In the city where there are enough street lights, it was possible to go at night.
[Points to note]
I can't help but notice the bug Attack.
Even though it is a consumable product, it is not cheap, so I am concerned about the durability of Mirror coating in the future.
View detail
![[Helmet/Option Parts]Pin lock Shield S-15](https://img.webike-cdn.net/catalogue/images/79595/S-15_pin_lock_shield_mirror_blue_TS.jpg)
Darker than imagined
I knew it would be difficult to see because of the mirror blue, but it was darker than I had imagined.
Of course, closing the Shield at night is very dangerous because you can't see anything.
On the other hand, it may be good on a sunny day.
View detail