Reviews
Fits: Others J-FORCE IV, Others J-Cruise, Others J-CruiseII
Very easy to see!!!
I am using Dark smokeSilver. I used to use BlueDark smoke, but I changed to Silver because I could see my face a little in some situations. Silver does not show my face at all, and it is easy to see, and I have no problem with Tunnel. Good product. View detail
some [Color] Smoke is strong.
Slightly less than s-companies [Color] Smoke is too dark, but in daylight it is just right, and if it is still too bright, you can deal with most sunsets and sunrises by lowering Visor as if pulling back your chin.
If the light looks double when the Pin Lock Seat is attached, the tension can be adjusted by tightening the Lock pin.
View detail
Dangerous when driving
The front side of the road surface appears to be wavy, possibly due to distortion in the glass part of the Goggles.
It works fine on highways and main roads, but I'm afraid to use it on roads with poor Asphalt conditions.
Compared to using the Exzero's attached Goggles, my eyes get tired, probably because the quality of the Glass part is low.
However, it is a very useful shelter from the wind and rain, so I can't let go of it.
View detail
Fits: Others J-FORCE IV, Others J-Cruise, Others J-CruiseII
Buy Silver mirror!
I use Silver mirrorDark smoke. The face is completely invisible from the outside, and although it is dark smoke, it is not invisible even inside the tunnel. It scratches the Mirror finish very quickly. In general, I am satisfied with this product. View detail
Fits: Others ASTRAL-X, Others RAPIDE-NEO, Others RX-7X, Others VECTOR-X, Others XD
Green Light [Color] Smoke
I guess it's a little hard to see on the pass.
I like the Semi-smoke.
View detail
JacketButton is ….
The visibility was good, but the Crimp on the middle JacketButton came off after one use …. I thought about exchanging it, but unfortunately I will return it because the same event is likely to happen again due to the make. View detail
Moderate density
Since it is a Mirror [Color] The smoke is also on, but it's not particularly dark and is easy to see. View detail
It hasn't run yet, but …
It is just the right Mirror.
The appearance from the outside is just right, not too reflective, but not so much that you can't tell that the face is a haddrill.
I don't mind the visibility at all after wearing it.
View detail
Goggles
Jet helmet would be easy to match and convenient for wind protection.
It is nice to hang Sunglasses on it.
View detail
Light smoke but dark
I was thinking more like Semi-smoke/Mellow Smoke from ARAI and SHOEI. [Color] It was Smoke leaning.
Normally, the Level is sufficient without Inner Visor, but it is a little uneasy in Tunnel and so on.
conversely [Color] When combined with SmokeInner Visor, it withstands midsummer pecans and direct western sunlight.
It is not easy to replace them on the go, as a Phillips screwdriver is required for replacement, which is quite a hassle.
If you run before dawn or dusk or at night. [Color] It is safe to keep it Clear.
View detail
Good visibility with minimal distortion
Surprisingly good visibility with little distortion, but on the other hand, the reflection of one's face is strong and makes nighttime driving uneasy. The length is a little short, plus the quantity:Pair (for Left and Right) Wind cutting noise and eyes dry out at high speeds due to wind entrainment from the gaps in the View detail
Flash mirrorColor:Buy Yellow
Flash mirrorColor:I purchased Yellow, but the Mirror feeling was Zero.
If you want to hide your face, you should choose another color.
View detail
First Bubble shield
Purchase at the same time as the company's Jet helmet
This is my first Bubble shield.
This is my first time, so I don't know about other companies' products, but I think there is a little distortion.
But maybe this is how it is.
It doesn't bother me that much.
Even at night, it doesn't feel so tight.
As I mentioned in the Helmet Review, I feel a little thoughtful when I attach it to the Helmet.
View detail
It's vulnerable to scratches, but what can I do?
The OEM Clear shield was so badly scratched and visibility so poor that I went with the Blue shield while replacing it.
I waited a month and a half for a BackOrder that was ready to be out of stock because the color was lighter than what I had seen in the pictures.
During the daytime, it is very easy to see. No glare.
At night, it was darker and darker than expected.
Since it is an Anti-Fog Shield, it is susceptible to scratches, but this time, I applied glass coating to test it as well.
If this can be kept for about 6 months, the pace of Shield replacement will be extended, so I think Merit will be there.
View detail
Diversion to HJCHelmet from Y's Gear OEM source
Helmet is HJC's IS33?
One of the pins of the standard Pin Lock Shield was removed and the wind noise while riding was noisy, so I thought about buying the same Shield, but I learned from Impression that a Shield that does not support Pin Lock from Y's GearYJ17 is available, and since it is less expensive than the Pin Lock Shield, I bought this Shield. I bought this one because it is less expensive than the Shield and I don't use Pin Lock Seat.
The only difference is that it is not compatible with Pin Lock Seat, and the engraved model number is exactly the same, Exactly attached.
View detail
competition [Color] Smoke is thick.
[How is it used?
Installed on FLX.
https://www.webike.net/sd/24464809/
Was the one you received as per Image?
compared with expectations [Color] Smoke was dense.
How was your experience with it?
[Color] Smoke is so dark and Mirror processed that you can't see the face at all.
[Points to note]
At night it is really hard to see when there is little light.
On rainy nights I have to open the Shield to see anything, so I do, but my face gets soaked.
To begin with, the Helmet has Sunglasses on it. [Color] Clear is better.
But this one is still definitely cooler looking.
View detail
fashion-conscious
Unlike the NORMAL Clear shield, the appearance is completely different.
Aside from looking very cool, they also block out the sun and reduce glare.
Items very effective in many ways.
View detail
I like the Titaniumium coating!
What made you decide to buy?
I installed it on my recently purchased ARAI:RX-7X PedrosaDesign helmet. When I started riding motorcycles, most of the shield replacements were Smoke Shield replacements. As time goes by, there are more and more options to replace the shield, and the helmet is one of those items that allows you to express your individuality. In case you are wondering, I am a shy person... I always replace the shield so that people can't see my face through the shield.
How was your experience with it?
Installing the Shield is much easier on the RX-7X than on the other ARAIHelmet, the Quantum Compared to the other ARAIHelmet, the Quantum -J, the RX-7X is very easy to install. I purchased the Mirror shield in Base Color:Smoke/Mirror coatingColor:It is blue. Since it is a Titaniumium color, the appearance of the shield color will change if the viewing angle changes. If I were to use a metaphor, I would say that it looks like a Titaniumium Exhaust or Titanium Exhaust Manifold. I don't think you can see my face even from the outside. I am a shy person, so this is perfect for me.
Next is the Impression from Shield, where the Base color is [Color] This is the DARKSmoke that I installed on my SHOEI Z-7 Helmet. According to the manufacturer's website, the Titaniumium blue shield that I purchased is the best choice for me because it looks brighter than the Shield. A slightly blue tint to the vision. Less color change and easier to see." It is described as follows. I'm looking forward to seeing how the seasonal changes of spring sky, mid-summer sunshine, autumn sky, mid-winter sky, etc. will look like through the shield. Here are some images of how the mirror shield I purchased looks. The photos were taken indoors under fluorescent lighting. I took pictures of the object without the shield and through the shield. (There is a difference in the way it looks depending on the monitor environment, so please consider this as a reference.)
Before installing the shield, apply a small amount of silicone oil to the sliding part of the shield. The instruction manual says, "Do not get silicone oil on the surface of the shield. Do not get it on the shield surface! Also, the Mirror shield is a delicate piece, so be careful when handling it.
View detail
I'm too shy to go to ・・・・ (laughs)
What made you decide to buy?
SHOEI:Z-7 Marquez Design Helmet Image Chain and my shyness... I replaced the helmet with a mirror shield so that people can't see my face through the shield (lol).
How was your experience with it?
Compared to the ARAI, the SHOEI is super easy to install. I think even women can install it easily. The appearance of the bike is great, and the parenthesis is so good that I wish I could see myself riding the bike with my own eyes.
until now [Color] I've been using Smoke's Shield, and while I was able to run with it in the Tunnel, I purchased the Base Color:Dark Smoke、CoatingColor:This is Orange. My impressions of the test run... Date:January 15, 2022, 2:00 p.m. Weather:Cloudy conditions. As mentioned in another user's review, the middle of the shield seems to be darker in color.:Pair (for Left and Right) I am using the ARAI Helmet with a blue mirror shield. When I installed the ARAI mirror shield, I felt uncomfortable, but I got used to it as I used it, so I am sure I will get used to this mirror shield as well. I also found it interesting to see how the different coating colors look differently.
This time, I'm looking forward to seeing how it will look like on a cloudy midwinter afternoon... or mid-summer afternoon sunshine. I just purchased the Shield Base Color:Dark Smoke. I think it might be dangerous at night, and it might be difficult to see inside the tunnel. I would like to drive safely with this in mind.
View detail
Used with ARAIS70
I used to use another manufacturer. This product has a long shield and is very windproof. View detail