Reviews
It didn't fit.
I bought it because WeBig says it fits New Model from 2023,
Could not install.
I checked KIJIMA's Homepage and it was 2023 - not compliant,
View detail
This is not a conversation.
The part where the clasp is hooked fell off during the product installation stage, and the product became Garbage as it was.
I bought this product because I believed in the brand, but this is not a good thing.
It's also a security product, for one thing.
View detail
Not available
Installed on a ZX25R.
The installation itself is very easy and can be done quickly with a Hexagonal Wrench.
After installation, I tried to use it, but to my surprise, the Wire length was too short to use.
I have a Smartphone Holder attached to the Daytona Clamp Bar, but it gets in the way and hits me.
I am considering whether to remove the Smartphone Holder or the Wire lock that I have installed.
View detail
Fits: HONDA CB125R, HONDA CB250R, HONDA CB250R, HONDA CB150R, HONDA CB300R, HONDA CB150R, HONDA CB300R
The structure can be unlocked in seconds without a key if you know how to install it as it is.
The details will not be disclosed for security reasons, as those who have purchased the product will be able to tell if they see it, but if the product is installed as is, it can be unlocked with a simple tool.
It can be improved with a simple modification, but why did they make it this way? It is too easy to remove even as a remedy for lost keys when you go out.
I guess it is supposed to be used as a simple lock for a short time, but I wonder about it.
The bolt that secures the lock to the bracket should have been made of something more difficult to remove, such as Torque, and if this product is used, it would be better to take countermeasures and use a strong screwdriver to attach it.
View detail
Helmet hits the gut.
If you wear a full face helmet, it will hit the footpeg hard and damage it.
I ended up buying KIJIMA again.
But KIJIMA was lamer for the keys, so I used KIJIMA for the Bracket and Endurance for the Key Body.
The key Body has the same shape.
View detail
Interferes with Tandem rider's leg.
[How is it used?
I wanted a Holder that I could easily hang my helmet on because I could not store my helmet when I put my luggage in the Rear Box when touring.
I had been using KIJIMA's, but it was a little difficult to use because it was located slightly behind the Tandem Footpeg, so I bought this one.
Was the one you received as per Image?
Almost as shown in the Image, but the Holder sticks out more than I expected.
Was the installation difficult?
It's easy
How was your experience with it?
Interferes with Tandem rider's leg.
In the end, I returned to KIJIMA.
[Included Parts:were they on?
It arrived.
[Was there anything that disappointed you?
As I mentioned above, I'm not sure if it interferes with the Tandem rider's leg.
Some may not care.
Mr. DAYTONA.
This will lower the Brand of DAYTONA.
Because it's DAYTONA... I bought it thinking....
I wanted them to think a little more.
View detail
Key must be inserted and turned when locking.
I bought KIJIMA thinking it would work without any problems.
Using a key to unlock the door is not a problem.
But using a key to lock the door is also a hassle.
And there is a little HANG in the use of the key.
In the end, it was so difficult to use that I hardly used it.
View detail
Hard to use.
The hook part is very small, so it is a little difficult to use. View detail
Fits: TRIUMPH BONNEVILLE T100, TRIUMPH StreetTwin, TRIUMPH SCRAMBLER
I can't install it
Compatible car models at the time of purchase include 16-" I bought it to put on my '16 Flat truckPRO because it was listed as a SCRAMBLER for the '16 Flat truck.
When I looked at the Instruction Manual, I found that there was something wrong. 17y-SCRAMBLER It was written.
Too bad, this is what you get when you buy on the Net.
View detail
Fits: HONDA CB400F, HONDA 400X, HONDA CBR400R, HONDA CBR250R, HONDA CB500F, HONDA CB500X, HONDA CBR500R, HONDA CB250F, HONDA CB250F
CBR400R 2022MODEL×
CBR400R I searched for 2022 MODEL and found it but I can't install it due to the difference in footpeg shape. 22 MODEL should not be purchased. View detail
Buy because it's less noticeable
I bought this product to make it less noticeable, but it is very difficult to put Helmet on.
I can't lock my helmet quickly when I'm touring, so I'm behind everyone.
I was disappointed because the look and Design is good, but I wanted something more SMART and quick to lock.
View detail
Fits: SUZUKI GIXXERSF250, SUZUKI GIXXER250, SUZUKI GIXXER150
You think this is Exclusive Design?
First of all, you can use the adhesive tape that comes with Tandem FootpegBracket.
You have to put it up.
It's a pain in the ass to measure all the way to the length. Just Cut it from the beginning.
In the midsummer in a certain ShoppingSite A Fat Amazon Review
This sticky tape is so sticky that it is useless.
I chose a cool time of day because I read that it was not
Work.
Sticky Tape [Color] Cleared, but here is the Male of Mounting Hardware.
This is the process of inserting the FemaleBracket while turning it.
It's a governor!
Close the screw and fix it (And the Instruction Manual says to use the screw lock agent.
It was stated. Then you should have included it in the package!)
However, even if I close the screw, it is still the governor and there is no way to talk about it.
After this, you can install the KeyBody, but the fixed bracket is not strong enough.
It's slipping away.
If I installed my expensive Helmet in this condition, I'm sure
It's going to slide down and scratch the Helmet!
The Helmet lock made by KIJIMA for old YZF-R25 that I bought a long time ago is
OEM Product? It is not regrettable only because it was the quality that seemed to be.
What did Kijima do to sell this Level as a model specific product?
You're thinking about it?
The Gixxer SF250 can't take Tandem Footpeg, so it's time to get a Bracket.
There was no place to insert the adhesive tape, so I had to use this adhesive tape.
It seems to have been designed, but I can't talk about it.
The design should be redone from scratch or the sale should be stopped.
I tried to remove the adhesive tape because it was useless.
I managed to get rid of the sticky glue by using Parts cleaner.
Removed and finished with WAKO'S Barriers coat.
It was a waste of time and effort, and it was totally annoying.
View detail
SHOEI Full face MicroRatchet's D Ring is hard to hang
It is difficult to hang D Ring of MicroRatchet of SHOEI Full face though I installed it.
It was scratched by dropping Helmet and failing to hang on the nail once.
Since then I have been using Helmet Lock Assist 2 KIJIMA:KIJIMA item number:P00033.
It's surprisingly hard to use and atrocious.
Not with this type of car.
View detail
The applicable year is a lie!
I ordered a BMW S1000XR and I ordered the Helmet lock before delivery, but after delivery I tried to install it, but the Size didn't fit!
The product description said 2015-2020, but that's wrong, it won't fit the 2020's!
Tried to return it but couldn't because it was too far apart from the order date. Give me an accurate product description!
View detail
Cheesy. Hard to use.
The texture is cheap.
The keys are also cheaply made and I'm worried they will wear out quickly.
The attached screw is designed to prevent theft and cannot be turned to loosen.
I noticed it after I installed it, so I can't remove it.
If you don't want to worry about the Screw being removed and stolen, I'd recommend using a different Screw.
You need a key to lock it and it's hard to use.
View detail
You may need a Helmet Anchor.
It looks perfect.
When I tighten with Tandem Footpeg, the hole position accuracy is too good, or it is off, or Bolt does not go into Smooth and hang.
After installation, I tried to put the D Ring of the Helmet through, but it didn't go in.
I managed to get it in at an angle, but the lock pin was bent and couldn't fit in the lock hole, making it useless.
The manufacturer recommended the use of Helmet Anchor as a guide, but
I didn't think to use it that much.
Because I never got to use it.
No performance, features, feel, or cosmetic ratings.
View detail
Fits: KAWASAKI NINJA H2(TM) SX, KAWASAKI NINJA H2(TM) SX SE
You're not
This item fits the Ninja H2 I purchased this product because it said it would fit the Ninja H2, but it doesn't actually fit the H2 You should think of it as a part and buy it... maybe the SX will come with a Bolt On! View detail
Fits: HONDA GROM, YAMAHA MT-09, Others , YAMAHA FZ1N, YAMAHA MT-07, YAMAHA FZ-8, YAMAHA FZ-1, YAMAHA BWS125, HONDA PCX
KN Planning Helmet Holder
I would not recommend to purchase this product due to following. there isnt any Bracket given to fix on the Product itself wasnt given instruction i have to use and modified my own bracket to fix. View detail
It's hard to use
I bought this while I purchased the Multi Mount Bar from DAYTONA
Basically, I don't use it very often, but it was very difficult to use it when hanging the Helmet 1.2 times
It's hard to turn the key around because it feels cheap and the hook is too narrow when you strap on the Helmet the reason is that ...
It is very difficult to use I wanted it to be secure
Also, I don't know if it's the mounting hardware noise while driving, but I don't know if it's the sizzling sound of the mounting hardware It's annoying
(Only during basic acceleration.)
It's also very expensive
View detail
Can not be installed.
Rnine T For MODEL before 2016, due to the shape of the product, RIGHT SIDE installation is impossible.
I am sorry I was looking for Right Side Helmet lock because I was wearing an Up type muffler.
View detail