Reviews
Direction of opening and ease of use as desired
I wanted a helmet holder that could be mounted with the open/close hook facing vertically, and that could be opened on the top side.
After installation, the upper hook opens from an oblique position so that the helmet is stable and secure without fear of falling off.
The design blends in with the car body and is unobtrusive and easy to install.
I'm glad I installed it.
Large was active in Touring immediately.
View detail
Helmet holder
[How is it used?
Simultaneous installation with Endurance Carrier
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
It was easy because the Carrier originally has a hole to install this.
How was your experience with it?
I use it whenever I park and have no problem using it.
It is easy to use
[Included Parts:were they on?
It was all there.
[Was there anything that disappointed you?
There is none
Other items that would be helpful
As with Carrier installation, it is a good idea to have Screw Lock agent available.
View detail
Helmet holder
I purchased this along with the Endurance Rear Carrier.
I thought that if I installed Endurance's Rear Carrier, I would not be able to attach the Helmet to the Rear Sets.
There was also a Helmet holder made by another company,
It was stated that if it is the same Endurance, it can be installed at the same time as the Rear Carrier,
I had no hesitation in purchasing the Endurance product.
With this Helmet holder fastened with Key Hook, mounting and dismounting of the helmet was easy.
Once this is installed, it will no longer be a hassle to install the Helmet on the Rear Sets.
View detail
practical item
This product fits perfectly into the endurance carrier I purchased earlier. It is by far the best in terms of design and practicality.
Since it can be attached to both sides of the carrier, I plan to order and install it additionally.
Unlike other products, the finish is neat. -------------------------------------------------- -------- It is the perfect product that fits the endurance carrier first purchased. It is the best in design and practical. It can be sweet on both sides of the carrier, so it will be ordered and mounted. Unlike other products, the finish is clean. Powered by Google Translator
View detail
The sense of security is different without it.
We installed it on a GSX-R125.
As a former victim of helmet theft, this is a must-have product.
To install, simply remove the Left Side Tandem Footpeg once and insert it between the two.
It is a very simple process.
In the meantime, we recommend retightening the screws with the proper torque to prevent the footpeg from falling.
View detail
It's solid
The lock is smooth and easy to use even with the Rear Carrier on. View detail
active in some way
The installation was done without any difficulties.
It is also easy to use.
View detail
ENDURANCE Endurance Helmet Holder Kit
The OEM Helmet lock was purchased because the Seat needs to be given. When the key is inserted, the lock is unlocked with a snap by Spring. When locking the lock, you don't have to turn the key, just push the bracket into the lock. The only thing I have to say is that it is expensive. View detail
Installation itself is easy.
The OEMBracket was removed once and installed between the brackets, but the OEMBolt to loosen it was hard and required a lot of force.
Well, it is probably because it is equipped with a loosening stop. This kit uses the bolt as it is, so it is safe in that sense.
The work itself can be done as long as you have a Hexagonal Wrench that fits the size.
View detail
good on cost
Mounted on Endurance Rear Carrier on PCX (JK05).
The PCX Endurance Rear Carrier originally has holes for mounting, so simply align the holes in the Carrier with the protruding holes in the Body and tighten the Bolt.
I think 5 minutes is enough time to install it.
I don't see anything wrong with the way it looks and feels, and how lightly it is used.
We are not sure if we will use this product, but we thought it would be more convenient to have it.
If you are using a Rear Carrier made by Endurance, it is not expensive and there is no harm in purchasing one.
However, you should not use this to run while hanging Helmet.
I think Cowl will be scratched.
One thing that bothers me is not a problem with this product, but Endurance does not include an Instruction Manual these days.
Instruction Manual cannot be downloaded without scanning the QR code on the paper included in the product and going through the registration process.
In this case, I don't need to read the Instruction Manual, so it is not a problem, but I would like to see the Instruction Manual included if possible.
View detail
Helmet holder
I installed it on my Endurance Rear Carrier. Installation was super easy as per Image and so far no problems with the Helmet holder. I'm glad I bought it. View detail
Perfectly used with the centre frame
It can easily be installed. The lock itself is quite broad, so it is convenient to mount your helmet in. It comes with two keys. One lock on each side of the frame sounds cool, but then I will need two keys to have them unlocked, which is somehow confusing(the keys are exactly the same). You should get a lock while purchasing the centre frame, it is is definitely worth it. View detail
Fits: HONDA CB250F, HONDA CB1300 Super Four, HONDA CB400 SUPER FOUR, HONDA GROM, HONDA CB1300 SUPER BOL D'OR, HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER BOL D'OR, HONDA PCX125, HONDA PCX125, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA VTR-F, HONDA VTR250, YAMAHA MAJESTYS, YAMAHA MAJESTYS, HONDA ZOOMERX, HONDA Forza300, HONDA CB500F
Easy to use
I installed it on my ADV150.
The Helmet goes under the seat, but I thought it would be too much to open the seat and take it in and out every time, so I put it on.
It also weighs about 200g, and the Handlebar's Quantity:Pair (for Left and Right) It is also a Balance adjustment.
(I had a Smartphone Holder and a Grip heater voltmeter on the other side)
On the way back from Touring, I was able to put Helmet on when the bottom of Seat was full of souvenirs, so I became comfortable.
What's good about this product?
There is no distinction between the top and bottom of the key, and it opens 100% by inserting and turning it.
The key opens down with a click rather than coming off, so you don't have to pull it out by hand.
When you tighten it, you push it upward. "Snap" It's easy to see that the lock is complete when you hear a
Installation is simple and straightforward as the Master Cylinder is tightened together.
Also, the Fixing Screw is hidden behind the locking rod, so there is less worry about the whole Screw being removed and taken away while locking.
【Review】
It's not high quality, but it's not visibly cheap either.
I think it is enough as a functional component, so I recommend it to people who have trouble placing Helmet.
View detail
Helmet is now easier to hang.
REBELOEM's Holder was too low and it was hard to hang Helmet.
Since I had an Enduras Backrest (with holes drilled for the Holder), I was able to install it easily without drilling.
I put a few drops of screw lock on the screw and fastened it.
It has become very easy to use ^^.
View detail
Fits: HONDA CB250F, HONDA CB1300 Super Four, HONDA CB400 SUPER FOUR, HONDA GROM, HONDA CB1300 SUPER BOL D'OR, HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER BOL D'OR, HONDA PCX125, HONDA PCX125, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA VTR-F, HONDA VTR250, YAMAHA MAJESTYS, YAMAHA MAJESTYS, HONDA ZOOMERX, HONDA Forza300, HONDA CB500F
Essential Items for Grom?
The Grom is a very difficult vehicle to use as it has no Helmet holder or under the Seat.
This product allows you to place a Helmet on the Handlebar, which makes it very easy to use.
However, since it is tightened together with the front master cylinder, it can be very dangerous if not installed properly.
Just tighten the Bolt, but you need to be aware that you are messing with the Brake.
The chin strap on the Helmet is short so you can place the Helmet in one position.
View detail
helmet key chain
This helmet key chain allows me to store the helmet and take away the worries from theft. It is easy to attach to the bike and I think the price is functionally appropriate for the product. It is great to be able to store the helmet and shop freely. Now I want to recommend this product. This helmet key ring has kept me a helmet and eliminates the worries from theft. I would recommend this product. translated by google View detail
Recommended for those who have trouble using the OEMHelmet holder
It's from various manufacturers, but it replaces the Bolt on the back of the tail cowl Many of the Type and Tandem Footpeg upper bolts were co-tightened to the upper bolts I chose to use Endurance, which has two bolts to hold it in place
The work was done with a Ratchet wrench with a HexaGon bit and Extension attached I did, but of course Screw Lock is painted, so the power is necessary in its own way
In the packaging, the Helmet lock is temporarily fastened on the other side of the plate You will need to reassemble As a precaution, I changed the Plus screws to Universal Product's Torque screw and used the I assembled it by hand
I don't think I need to explain the function any more, but I don't need to remove the Seat every time Convenient I think it is a good product
View detail
It's easy to use
KIJIMA Rear Carrier with WEBIKE MODE Helmet Lock But since the Carrier was removed, it can be attached to the License Plate I was looking for a helmet holder
I used to use a Helmet holder of the same type from SP Takekawa, and I have one on hand But there are times when it is difficult to use the cylinder-type locks slightly, and this model of STD shape? I bought the product
I am satisfied with the quality and feel of the product
View detail