Reviews
It didn't fit.
I bought it because WeBig says it fits New Model from 2023,
Could not install.
I checked KIJIMA's Homepage and it was 2023 - not compliant,
View detail
Helmet lock
Installation is easy
Even at touring destinations, it was inconvenient to remove the Seat and put on the Helmet NORMALSpec. so it became convenient.
View detail
In OEMHelmet holder
I have not been able to install it yet because the weather has been rainy on my vacation since I purchased it, but as far as I have checked Reviewetc., I think it is a highly satisfactory product.
Since the OEMHolder cannot reach the Helmet's Holder...
View detail
Simple and Minimum Helmet Lock Assist
I worked hard to use Wire's Hell lock that came with my new car when I bought it, but this one is one-touch and easy to remove.
I was worried about whether it would fit the inside diameter of the D-can.
Dear Mr. WeBig, It would be helpful to improve the illustration to include the Size of each part of the product in the illustration, so that we can be assured when we purchase the product.
View detail
Convenient to have
It is easy to install and looks like an OEM product after installation.
The Helmet is hidden on the Left Side, so it is good that the Helmet is not visible when taking pictures of the Motorcycle from the Right Side.
View detail
Fits: KAWASAKI Ninja 250, KAWASAKI Ninja 400 (2014-)
Necessities
The OEM helmet holder position on the ninja is not good enough for the helmet to hit the footpeg, so I installed this. It is very easy to use and I wonder why it was not in this position from the beginning. When you remove the helmet lock, you have to remove the t30 screw, but be careful not to lick it, because the screw lock is painted and very hard. View detail
Fits: KAWASAKI Ninja 250, KAWASAKI Ninja 400 (2014-)
Necessities
The OEM helmet holder position on the ninja OEM would not allow the helmet to hit the footpeg, so I added this. It is very easy to use and I wonder why I didn't put it in this position from the beginning. The t30Screw is coated with a screw loosener when removing the helmet lock, so be careful not to lick the screw. View detail
Fits: BMW R1200R, BMW R1200RS, BMW R1250R, BMW R1250RS, BMW S1000RR
It's perfect
We had a Dealer install it on a BMW R1250R in 2023!
The labor cost was 1,650 yen.
Very useful.
View detail
Fits: SUZUKI GIXXERSF250, SUZUKI GIXXER250, SUZUKI GIXXER150
That would be handy
The DL1000 V-STROM250SX is mounted on the same frame as the Gixxer 250, so no special modifications were required.
Wrap the Rubber around the Bracket and insert it into the Bracket.
*Because it is only clipped by Bracket, it is better not to run with Helmet hanging down, because there is a risk of it coming off.
I don't think I'll be using it much since I have a top case, but I think it will come in handy when I have a full load of souvenirs, etc.
View detail
It is easy to install.。
You only need one Hexagonal Wrench to install it, just apply Screw lock and tighten it. I always buy helmet locks from this manufacturer because they are inexpensive and the quality is very good. View detail
Postscript to postscript!
You probably think that a helmet is something that someone else is using in direct contact with your skin, and that there is no reason for someone to steal such a thing. The idea of a thief is that he/she wants a helmet for a Tandem person. So don't think that because the helmet is large, it is durable or that the probability of it being stolen is low. View detail
Postscript.
In my opinion, the screws of this Helmet lock are Large, which is an oddly soft material. In my opinion, the screws that fasten the Helmet lock are Large and are made of an oddly soft material! Therefore, it is safer to work with caution and take it easy or Shop.
Helmet locks themselves may be inexpensive, but helmets are expensive, and if they are stolen, you will not be able to get back on your motorcycle.
View detail
I was relieved that it was as good as I imagined.
The vehicle used is z900RS.
Due to the convenience of installing the Side Back on the opposite side of the Exhaust System. The existing helmet holder could not be used.
Then, I thought of for Tandem, Helmet holder.
It can be installed on the opposite side of the existing helmet holder.
This product has arrived. It looks the same in appearance as the existing OEM product.
I wondered if the existing helmet holder could be attached to the bracket as it is, and it did so without any discomfort.
In other words, the Helmet holder that can be used with the Engine key arrived on the opposite side of the existing one.
View detail
Ease of use unique to Exclusive Design
[How is it used?
RC42 has a Helmet holder if you don't remove the Seat.
It was inconvenient when I was on the road because I could not use it. I was looking for a product that was easy to use, and I found this product and purchased it with high expectations for its exclusive design.
Was the one you received as per Image?
Almost as per the Image.
Was the installation difficult?
Installation was very easy!
The only tools used are +Driver and 5mm and 6mm Hexagonal Wrench.
How was your experience with it?
Balance varies slightly depending on the type of helmet.
It is a Level that is not a problem.
[Included Parts:were they on?
The key is Quantity:Includes 2pcs. Includes a helpful Instruction Manual.
[Was there anything that disappointed you?
None in particular.
View detail
Can also be installed on the GSX-S1000GX.
[How is it used?
In the photo, I used a helmet, but I was concerned about the load on the chinstrap, so I installed a wire lock and used it to lock the seat bag.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
It was easy to install by simply removing the Bracket from the Tandem Footpeg.
The Bracket is quite heavy, so recommends that you remove it while holding your hand on it.
How was your experience with it?
I am satisfied because I don't have to take off the tandem seat any more because I don't have a helmet holder.
[Included Parts:were they on?
Key Quantity:2pcs and Instruction Manual, 2 KIJIMASticker
[Was there anything that disappointed you?
I was expecting to be able to convert it to one-key, but the keyway was the opposite type from the vehicle. If you want to convert to one-key, it is difficult to purchase on Net.
[Availability and clarity of the Instruction Manual
Even the Torque value of the BracketBolt of the Tandem Footpeg was kindly listed.
[Opinions and requests to Manufacturer
The GSX-S1000GT and RearSub-frame seem to be the same and can be installed. We would appreciate it if you could add it to the list of compatible models.
View detail
I am very satisfied
Installation of the product is very easy. Also, the delivery of the product is very fast, and the product description page and configuration are the same. View detail
Useful if you have it ^^.
[How is it used?
When you stop at Convenience or some other place where you stop for a bit.
Was the one you received as per Image?
Large Image Street
How was your experience with it?
It did not go into the CYGNUS Hell Lock pin as is.
[Points to note]
The pin holes are unexpectedly small, so some modifications may be necessary depending on the vehicle.
How did it compare to other products?
No comparison
Other items that would be helpful
As a side note, the included Carabiner is too small.
The 100 yen shop items of today are of higher quality.
View detail
Cannot be installed with Carrier
Ease of use of Helmet lock is normal
Installation was easy with tools.
Note that if a KIJIMA Rear Carrier is attached, it will overlap the Pipe and will not be usable.
It's about making sure you use other locks.
View detail
Fits: BMW R1200GS, BMW R1200GSAdventure, BMW R1250GS, BMW R1250GSAdventure
No need to worry about food while touring.
I used to hang my helmet on Mirror when I took a break during touring. I was worried that it might be stolen or fall off, but now I feel safe! However, I am worried about rust because the material is steel. It is easy to install and just fits. View detail
Helmet is now easier to lock.
I was having a hard time using the helmet holder that I moved when I replaced the rear suspension made by Y's Gear, and when I locked the helmet, it was close to the engine, so I had to be careful about the mounting angle, etc. I saw this product on SNS and thought it looked good, so I bought it.
Tandem Footpeg and Bracket are attached by co-tightening, but our car is equipped with SSB GymkhanaBumper and Quantity:Since the Slider in the set is attached in place of the Tandem Footpeg, the Spacer included in the product was not used.
I was able to install it without hitting the frame.
The OEM lock part was available as is, so the part used in this product was Bracket Only, but I am still satisfied with the ease of locking.
View detail