Reviews
I will spin!
Well, it may be understood if you think about it, but since it is a translation that can be stopped with Bolt one by behind Number
I will rotate around Bolt.
It is performance as expected as expected to be locked, but I wanted a little more ingenuity for the Plate to be installed.
View detail
Fits: BMW R1200R, BMW R1200RS, BMW R1250R, BMW R1250RS, BMW S1000RR
Problem with installation Relationship between Motorcycle and other Option
It was installed at the time of purchasing Motorcycle at Shop, but it seems that the compatibility with Wonder Rich Inner fender seems to be bad and it was said to be Large funny View detail
Fits: DUCATI Monster 821, DUCATI Monster 821 DARK, DUCATI Monster 1200, DUCATI Monster 1200S
Installation is simple
If you want to run without removing the top case you normally use, if this is attached
There is a sense of security.
Installation is easy with the Instruction Manual street.
No drilling processing. It is the Type which fixes by sandwiching Frame under Seat with 2 Brackets.
However, I worry about wobble while using.
For the time being, I applied the Screw lock agent and attached it.
The parts themselves are heavy except for those who are aiming to reduce the weight of their cars.
View detail
Personally I should have purchased it.
I bought it for use in CYGNUS X-SR 2008. The making of Red color is beautiful, light and Design is also good, my Motorcycle's Helmet holder has OEMHelmet holder in SeatFront so we can afford Holder I installed it because it was Large strange to hang the Helmet, but because of a hard Holder I caught on SeatFront and the Seat was partially damaged .. If it is a general independent Helmet holder I can keep the locked condition beautifully think. View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled)
There was something more convenient for you
There is no Helmet lock in the Z1000, it was fixed with Wire but it became troublesome purchase.
Installation is easy.
The lock part is crappy, but I think that it can not be helped if I think about the price.
View detail
Convenient!
GSX1300R HAYABUSA is a structure that removes RearSeat and hooks Helmet to Hook
It was likely to be bold if it took each time, I had Helmet on Seat but I little worried ,,,
So I attached Holder
It's convenient and the price is right and goods are also good
If you increase one difficulty, the installation location is behind RearSeat so Backetc that is wider than Seat. You can not use it on a ride
However, other than that can be Recommendation.
View detail
Very easy to install
It is hard to use MT-25 due to the hook behind the Tandem seat.
For that reason, we decided to add another company company's Helmet holder.
It is currently the exclusive Other Company Product
- KITACO
- KIJIMA
- AGRAS
Three companies, all of which are made to bite between LeftTandem Footpeg and Frame.
Since KITACO and KIJIMA are commonly found at a low price, we chose AGRAS which I have not seen anyone using this time.
AGRAS can select fixed plate and key parts with Silver or Black respectively.
Both pictures are Silver.
Personally I think Key is Body Cool Black.
Installation is easy and BoltQuantity : It takes just 5 minutes to remove the place which is stopped at 2pc and replace it with attached Bolt and pinch it and tighten it again.
As a feeling of use it is an ordinary Helmet holder with no special or superior usability.
I do not know how wonderfully this price is worth it.
The shredded Plate may be this price for Cool.
Although COSPA is bad, it is not something that can be recommended to everyone, but it may be Recommendation for people who want to stick to it because it looks good.
View detail
I am lost with KIJIMA ...
I got lost as KIJIMA made, I bought this.
Although KIJIMA was attached to another Motorcycle, I purchased it because I thought that there would be a problem if I had a letter since locking was not done when the lock part was U-shaped and it did not lock Helmet.
Although it looked good, it was hard to use if it was a single Body more than I thought.
It is scary because Helmet or Motorcycle is nearly scratched if there is no Helmet Anchor of the same Manufacturer.
I think that you are satisfied after purchasing additional Helmet Anchor.
View detail
Simple appearance and ease of use are good, weak fixing force to Handlebar
【What made you decide the purchase?】
In the past I used a type Helmet holder tightening with the Clamp of the Master cylinder made by KITACO, but for the sake of convenience it looked like an alternative thing because it looked so bad looking, I found and purchased the Helmet holder of Midge which seems to be easy to use in Simple.
【How was it actually used?】
As a Holder application, it is possible to use it normally without being impossible.
However, as described in the Package, it seems that we must regularly lubricate with Spray for the keyhole, and the movement of the key felt a bit awkward from the beginning of purchase.
【Mounting was difficult?】
Installation is easy with the hex of Wrench.
Those who are not used to attaching this hand are HolderBody, Bracket, tools etc. It would be better to curl so as not to hurt the car body by dropping it.
【Please tell me the installation point and hang】
22. I attached it to a 2 mm diameter Handlebar, but the fixing force to Handlebar is weak, Holder will move easily by hand.
That is a problem with that, so we have fixed a thin anti-slip tape on the Bracket on the HolderReverse side.
[Is there anything I was disappointed about?]
The lack of fixing force to the above Handlebar was disappointing.
It is ruined though it is a good helmet holder.
I was seriously considering going to incombustible garbage until I found a thin type anti-slip Tape at Home center.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Anyhow, please fix it to Handlebar.
I think that it is impossible to hang an expensive Helmet with confidence if the Helmet holder itself seems to move up and down with a slight force.
【Have you compared items?】
Size is small Small Helmet holder which is all unified with Black from keyhole to Holder part is this there is nothing compared..
[Others]
I think that if the fixing force to the Handlebar and the durability of the keyhole are managed somehow it will be the best product.
It is true that it is overdoing a bit.
View detail
BABYFACEBabyface Helmet lock
Fast installation. Easy to install. When actually applying Helmet, it may be necessary to some familiarity - - Convenient if there is one. Making is solid. View detail
I can use it normally
Fixed to Handlebar. I can adjust the thickness with Rubber's Spacer, but in the case of my case I got loose but it did not fit well, so I adjusted the size by cutting the Rubber.
I do not feel that the lock part is so sturdy, so I do not want to put too heavy load .... There will be no problem for the purpose of locking a little Helmet.
View detail
It was a little
Hanging the D-can in the Helmet holder
It is a product that makes it easy to get caught because it is a little extended length,
Depending on the Helmet, the size of D camp is different
Be careful when purchasing.
By the way,
ARAI's AstroIQ
Was this review helpful?.
View detail
For immediate convenience
OEMBoltQuantity : Easy installation just removes 2 pc and replaces it with exclusive Bolt Expective Design.
But unfortunately - - -
Part 1
Helmet interferes with Rear tire and Tire's Rubber transfers to Helmet
Part 2
Because the unexpected thing itself stands out I wanted to hide a little more
(But I can not solve the problem of Part 1)
Although there are Demerit, I do not have to remove Rear seat every time, I think that the advantage that can be locked with One-touch is bigger than Demerit
View detail
I attached it to the 16th year MODEL of zx6r.
Performance itself is as expected and is generally satisfying. One thing I was concerned about is that when you attach it with DRing of Helmet, when you remove the key, since Helmet and the keyhole's clearance are few, it is a little hard to work by turning the key. I do not think we can use it, so I do not think there is any problem with Large.
View detail
We purchased Helmet for theft prevention.
- There was no Helmet holder in the car body, I always hung Helmet to the Mirror, but because I became uneasy I bought it for theft prevention.
- When attaching Helmet, it is difficult to attach because it is narrow with Cowl and Holder is in the back!
- expensive
View detail
Helmet holder is still useful!
Buy without Helmet holder.
Because HolderBody and Body interfere with installation, the installation Bracket has been processed, but in order to still interfere, we added a Spacer and fixed it.
Design itself, the product itself is solid, I am satisfied.
View detail
2016 Can not attach MODELNinja 1000 pump
Although Ninja 1000 which changed the model from 2014 may be common, if it is as it is, it comes into contact with the car body, it can not be forcibly attached.
I cut the hole on the Helmet lock side by 3, 4 mm with File.
After scraping, it became installable, it ceased to touch the car body, and we had a margin of about 2 mm.
View detail
The installation was able to be Smooth, but there was no sense of Well and it was disappointing
I attached it to HJ CHELMET. When wearing, it is always troublesome to tie down the chinstraps, there is troublesome, if you are trying to tie up in a hurry, there is a time when you are running in a state where Helmet is off in case of falling etc. without properly going through the ring.
Considering safety, I thought the binding of the chinstraps was a kind of ritual even though it was annoying.
The price is cheap, so I bought it for trial because it is easy to purchase.
Although it is easy to install, after pushing in, there is a little play, there is no sense of Well and it is a glazed one.
I am a bit more tightly and I think that it is easier to operate and has a sense of security if the body is light.
View detail
Universal
Key position and lock orientation are good. I used OEM of SEA BASS but it is hard to use Spec. It has changed. It was able to attach firmly to the Cross Bar with the attached Rubber spacer. View detail
It may be better to use Type attached to Handlebar
Making is solid..
It is convenient to be able to apply Helmet without removing Seat each time.
However, in the case of V-Stromno for tightening with Tandem Footpeg
Position is too low.
On rainy days I feel like using water drops and dirt around footpeg I can not help feeling it.
View detail