Reviews
Maybe it's just my imagination, but it seems to work!
I have been using it for over a year now, and in that time, the inside of Helmet has never started to smell, so I think it works reasonably well.
I own 3 Helmets and use them differently, and I always deodorize each one with this after Riding. Two of them can be washed with the interior removed, but I have not washed them yet. (Don't tell me it's dirty.) Even so, there is no smell. I always put on the helmet after putting on the head cap, so it may be related to the fact that sweat does not penetrate directly into the helmet's interior.
The first, Jet helmet, was purchased with RedCUB 5 years ago and was used year round at first, but about 3 years ago I bought a half helmet for summer use and used it in fall and spring, and about 2 years ago I bought a System helmet for winter use and limited it to spring and fall use.
In other words, the interior washable Jet helmets are worn almost exclusively in the spring and fall when the weather is nice, so they do not sweat much, and the washable winter System helmets are worn almost exclusively when the temperature is cool, so they may not smell as much. Still, the non-washable half helmets are worn during the sweaty season, but they do not smell. This may be due to the fact that the wind does not blow in as much and the head cap keeps sweat out.
The top surface on which the helmet is placed is sloped toward the front, but I feel like the helmet might slide down. The vent is raised, so I don't think it will get caught and slide down...but it would be nice if it were a little gentler.
The body is Type C and comes with a Type A-C Cable.
I always use it at maximum air volume? 3 hours operation, but with a 10000mAh Mobile Battery, I can run it 3 times +/-, which is quite eco-friendly.
View detail
For storage of removed Shield!
[How was the product?
As the name suggests, this is a pouch for storing and carrying Shield, and the material is made of fine-grained fabric to prevent wounds from sticking to the Shield when it is put in and out of the pouch. Also, the size is (side) 26cm× (Vertical) It is a generous size (46cm) and can accommodate a variety of Shield shapes. I would have preferred a size that fits the Full Face Shield, but it's a little hard to tell from the picture. I would have preferred a size that fits the Full Face Shield, but it's a little hard to tell from the picture on the site!
For now, the use of the Porch I purchased is to store Shield at home, so I will hold out for Size.
Other than the Size, the material and design is a good product.
View detail
RE:MET
It is useful for drying wet helmets and gloves on rainy days.
Air volume control (low, medium, high) and Timer (1, 3, 6 hours) are convenient.
It is helpful because it dries a Large body overnight. (Used on high, 6 hours)
I think the deodorant is working because it doesn't smell bad. Maybe in the summer the effect will be a huddlerill?
View detail
Interior drying for comfort
Helmet's interior drying had been done with an electric fan, but this product was purchased at a discount.
It's a lot easier than fan drying because all you have to do is put the Switch in and place the Helmet.
We would like to check the deodorizing effect next summer to see if it works.
Some people say that it is difficult to adjust the air volume after placing the Helmet, but before placing the Helmet, you can use the Quantity:Set and there is no problem.
I have no complaints because I can just move Helmet out of the way when I want to switch in the middle of a session.
The surface is prone to minor scratches, so the included Seal is applied to protect it.
Adapter is a 5V-2.4A one from 100s with no problems. (At first, I used one with less than 2.0A and it did not produce high airflow.)
View detail
Replacement of defective products.
It seems that the item we purchased was defective. We reported the symptoms and received a replacement request from the Manufacturer.
It takes about five days to receive the request, send the defective product, and receive the inspection report and replacement product.
The very quick response and honest reporting of the cause of the problem as an abnormality of the underlying wiring increased my trust in DAYTONA. However, if the response is too quick, then conversely, there may be many defects in this manufacturing lot or in the product itself, and there may already be some data. (I myself work for Manufacturer's defect analysis.)
And I knew that when I opened the package, it was covered with dirt and fingerprints as before….
Please note that germophobes should be aware of this.
At any rate, I have been using the replacement for 1-2 hours each time I wear Helmet, and so far it is working fine without powering down this time.
docomo MobileCharger02 (Catalogue specifications output 1.5A) so "strength" The 1-hour Timer works perfectly well with a
I think this could go on the road, and since the Mobile BatteryBody can be charged from USB while on the road, it would be a good idea to carry it with you if you have room in your Trunk or Bag Space when Touring.
If possible, there should be a special Bag for it….
View detail
The functionality is good, but the position of the Switch is bad and the product looks used when opened.
I also bought a new helmet with the replacement of the Motorcycle, so I also popped this one in while I was at it.
Spray lightly with Resesh, Jet helmet is airflow "strength" 1 hour at Full face, Full face is air volume "Inside I tried it in about 2 hours at
The result is not a warm breeze, but if you just want to dry, the airflow "Inside It will dry in an hour at
I don't know about the deodorizing effect on items with sweat or scalp odor on them since Helmet itself is still new, but the smell of the recesh was gone, so it may have a deodorizing effect.
The Instruction Manual stated that the power source to be used should be 2A or higher, but I tried using my docomo PocketCharger02 fully charged and found that the airflow "Inside The system could be used for 2 hours at
After 2 hours of operation, the remaining battery power of the PocketCharger itself was about half orange Lamp, so it may have still had some extra power left, but this is just for reference as there may be individual differences between each Mobile Battery.
The specifications are 1.5A, as shown in the image below.
For use inside the home, we recommend using more than 2A of power normally.
Volume of concern is airflow "Inside If so, it's not that much of a concern, "strength" The "Large" size is a little too large for the "Large" size. I think it's a little Large.
If you are prepared for a certain level of noise, you will not be bothered by it.
Unfortunately, switches cannot be operated with full face.
Why didn't they place it on the side of the Body? The only question that comes to mind is.
Another concern was that there were fingerprints and smudges on the Body when the package was opened. (See Left Side and upper side of Body photo)
The power suddenly turned off once while in use, so I wonder if it might have been a defective item that was returned to us for inspection and found no abnormalities, so it was shipped out again as is. Whatever the case, the second-hand feeling was very disappointing.
The sudden loss of power was when I was using it connected directly to Adapter, so if I see the same symptoms again, I will consult with you as a defective product.
At any rate, I plan to use this one for 30 minutes to an hour every time after using Helmet, even in winter.
View detail
If you are a Jet helmet user
When it was first released, it was out of stock throughout the Season, and I bought it when it was finally in stock.
I don't ride for very long and Helmet is not that still, but I think it would be refreshing just to have it blow dry. I feel that way.
The body is slightly sloped forward and downward, so a Jet helmet without a chin section might roll if you try to place the front of the helmet facing forward. It will probably roll down.
I think Full face could be placed in a good fit.
Finding just the right power supply may be surprisingly difficult. In my case, the Tap was in compliance with the standard, but the Cable was not good enough to work. I think it's enough for normal use) would work, but it's not long enough to get to our Outlet…….
It is time-consuming to find a power supply with the ideal length and shape, but even if Included Parts:is included, there will be dissatisfaction with each part, such as long or short, or this shape takes up too much space, etc. So, the fact that it is cut down to the length and shape is a good thing. I think it is a good idea for riders who are in the habit of making adjustments to their own specifications.
View detail
very good
The effect is outstanding.
Odors such as perspiration are 99% gone.
However, the air volume adjustment button is reversed.
in notation
1:Weak 2:Medium 3:Strong
In fact.
1:High 2:Medium 3:Low
There is no problem in use, but I was puzzled at first.
View detail
Essential Items for Summer
[How is it used?
Used for Helmet and Gloves after use
Was the one you received as per Image?
Unchanged from the published photo.
How was your experience with it?
Available for Helmet and Gloves.
When used for Gloves, there is a dedicated Adapter that should be used.
I'm not sure about the installation position when the helmet is hung to dry,
It seems to be no problem because the Large body can dry without any problem.
The button is an electrostatic touch type.
Basically, the airflow is set to Max and Timer is also set to Max.
The sound at Max air volume is reasonably Large and can be heard when placed in a room.
Gloves are not a problem when used, but when using Helmet,
The switch is located inside the helmet, making it difficult to push.
When Helmet, it is better to put Helmet after it is activated.
The condition after use is well dried and there is no smell of sweat in the summer.
The same goes for Gloves.
I felt it was essentialItems for the summer season.
It has a filter on the inlet, which seems to be a deodorant.
It appears that they can be purchased as consumable items.
The body itself is light and not too large, so it will not get in the way.
[Points to note]
Proceed with the Button push ahead when using the Helmet.
How did it compare to other products?
No comparison products.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
It would be even better if the switch could be positioned so that it can be checked even after the helmet is installed.
View detail
For maintenance after touring
I don't care for the smell of Helmet, so I don't know about its deodorizing effect, but it can be dried and stored safely. I think the air volume is also sufficient. It is also useful for drying gloves. However, as others have mentioned, it is a pity that the Switch is hidden when the Helmet is placed on it. View detail
For Helmet drying
I bought it because I thought it was essential for the coming season.
Until now, when I sweat, I leave it indoors as it is. I used to just wash it occasionally.
After purchasing this product, you will be able to use the Helmet immediately upon your return from riding your Motorcycle.:Set. just press the button and leave the rest to me. The next time you put it on, there is no unpleasant smell.
Minus one point, a separate Adapter is required.
View detail
Deodorant effect
It is a detergent for Helmet's interior, so it is fragrance-free and does not have any odor after washing. Anyone can do it easily by following the Instruction Manual. View detail
Convenient
Purchased for Mold prevention, deodorization, and moisture control
The prices are reasonable, especially for the Jet Helmet, the
If you have more than one full face
It is very recommendation when storing
There was one for Wear.
It looks like that one is no longer on sale.
View detail
2nd unit
DAYTONA's first generation?Helmet deodorizer DP-H1 was used.
I was wondering what to do when the launch ended and this one broke.
Whereas the first generation was only power on/off.
This one has Buttons for air volume and time.
In the first generation, I used to leave it on almost 24 hours a day when I used it.
It seems that continuous use of more than 12 hours is not a good idea this time.
So I am using it with the air volume at the Largeest and Timer 6 hours.
I think the airflow is more than the first generation when the airflow is at its most Large.
The first one is Plasma ku Raster and this one is Minus ion called Ionissimo.
I Sprayed and used fa BREEZE before using it.
So far the smell of Helmet has not been a problem.
It is also a Helmet storage area, and it feels good to always have a dry Helmet available.
The question now is how long the life of the Body and the minus ion generator will last.
View detail
For You who want to do HelmetCare.
I purchased this product for the purpose of deodorizing Helmet.
When deodorizing the Helmet, washing the interior would be most effective, but it was a hassle to wash the interior frequently.
This product also has a deodorizing effect, but I think the drying effect of the wind can be experienced more.
After the Helmet is dried, it is used as a Helmet rest as it is.
The touch buttons are concentrated at the top, making them difficult to operate when Helmet is in place.
View detail
You'll feel like you're wearing a clean Helmet every time.
First of all, I can do Helmet and I am grateful that I can do Gloves.
It also serves as a Helmet storage area, thus killing three birds with one stone.
However, it would have been better if there was a little more ingenuity in the button operation with the Helmet in place.
View detail
HelmetMaintenance products that I have wanted for a long time.
I have always been concerned about the sweat on the Helmet inner after driving.
This product saves me the hassle of taking the Inner on and off!
Sweaty smell is no longer felt with Ion deodorization☆.
The only reason I dropped one star is that I would like to have a little more Pipe for drying Gloves throughout the Gloves.
I would have liked to have had a device to make it go around....
But for post-run maintenance on the Helmet, the Large variant comes in handy!
View detail
Keep the inside of the Helmet clean!
[How is it used?
I always use it after running with full face helmet.
I bought it to replace my Helmet.
Was the one you received as per Image?
It was just as Image.
Although no one around me was using the product, I had seen various impressions and examined the product, so I had some understanding of the product.
How was your experience with it?
As I got older, Helmet left me with a different feeling than the smell of sweat, and each time I removed the interior and washed it, I was unable to get it back to smelling clean and nice.
I wanted to do something about it, so I bought a new Helmet with a renewal that I wanted to keep clean somehow, in conjunction with the purchase of a new Helmet.
I have been using it since then and always store it inside after use, even if it is not in the middle of summer.
Maybe that's why, some time after my purchase, there's been no change in the interior smell!
It is comfortable to wear every time.
[Points to note]
It seems that maintenance of SilicaClean itself is also needed.
It is also marked, so don't neglect it.
View detail
Ideal for drying
I love that i can use it and dry it out!
I can hear a fair amount of noise when in use, but oh well, it's tolerable!
I can't say what the deodorizing effect is, but I expect it in the future.
View detail
Easy because it is dedicated
This detergent is specially designed for helmet interiors:remove the helmet interior, add one bag to warm water, and wash by hand. After a while, the lukewarm water turns black and you can see that it was very dirty. In my case, I fill a washbowl with lukewarm water and put a bag of this in it. After rinsing and when the lukewarm water becomes clear, I drain it with Toweletc. and dry it in the shade. I think this is a must-have for the summer season when I sweat a lot, because it removes odors. After washing, it feels good to put the Helmet on and it feels clean. I think the price is a little high and if it were cheaper I would use it more often. View detail