Reviews
Easy to use
It is a little difficult to install, but the texture and feel is good.
This product can be unlocked with a key and the key can be removed.
To lock, simply engage the Helmet and push in.
With other products, you can't remove the key until you unlock the lock with the key.
Helmet is in the way and it's hard to operate the key.
Like this product, you can insert the key only when you want to unlock the door.
It is more convenient to use the one that can pull out the key that could be released.
View detail
It helps prevent theft
VIRAGO to Standard Equipment Helmet holder Plusα in
I bought another one to put on the Handlebar side!
You can lock the door with one touch without a key
Good You don't have to lock it up again to hang a Helmet
I'm using it as an alternative to the Oku-Hook
Plating is clean and not rusted after 2 years, so the quality is good
I think
View detail
I am useful.
Since the Helmet Holter of YAMAHA XJ 6 F can not be used unless Seat is removed, I tried using this product.
Installation was Pipe thick and included Bolt short, so purchased and installed 30 mm Bolt at Home center.
Installation is very easy.
I used it for a year, but Plating has no problem.
Key hole seems to be rusty.
It's free to install, it can be devised so that it does not get in the way, and Touring is useful too.
There are exclusive items by car model, but this product is enough.
View detail
Since it was hard to use the pure Helmet holder of NSR250, it purchased.The Rubber board was rolled and attached to the Upper cowl stay.In the case of attachment, since a key will fall out with a Hook opening if it opens by a key in the case of removal, a
Since it was hard to use the pure Helmet holder of NSR250, it purchased.The Rubber board was rolled and attached to the Upper cowl stay.In the case of attachment, since a key will fall out with a Hook opening if it opens by a key in the case of removal, and a Holder can be used without a key, it is convenient. View detail
Since a Helmet in is shallow and a Helmet could not enter easily, PCX purchases here.It is easier-to-use than the Helmet holder currently attached to the car body.It is also GOOD to be simply attached by one Plus driver.It can be made left open and ca
Since a Helmet in is shallow and a Helmet could not enter easily, PCX purchases here.It is easier-to-use than the Helmet holder currently attached to the car body.It is also GOOD to be simply attached by one
Plus driver.It can be made left open and can use also as a simple Convenience hooks.(Light thing limitation)
View detail
The pure Helmet lock of VTR will have too bad a place, and a Helmet will interfere in it at a Tire. Although it worried with the Helmet holder of PMC in search of which he will buy, since the goods here called it the inside of a Sale, it purchase
The pure Helmet lock of VTR will have too bad a place, and a Helmet will interfere in it at a Tire.
Although it worried with the Helmet holder of PMC in search of which he will buy, since the goods here called it the inside of a Sale, it purchased.The Helmet lock was attached to the Handle brace.Although it has attached easily, since the attached Rubber was thick, it was another, bought a Rubber sheet and had attached it.
View detail
By one Plus driver, it has attached easily [ a Handlebar ].Since it can lock if a pin is pushed in also where a key is extracted, it is user-friendly.Appearance is also texture like an original manufacturer's product with the sufficient plated part and af
By one Plus driver, it has attached easily [ a Handlebar ].Since it can lock if a pin is pushed in also where a key is extracted, it is user-friendly.Appearance is also texture like an original manufacturer's product with the sufficient plated part and affinity of PCX. View detail
The Helmet lock of CGC was purchased.Or [ that neither appearance nor the engine performance probably has great difference ].If it is , aren't the cheap goods here better?
The Helmet lock of CGC was purchased.Or [ that neither appearance nor the engine performance probably has great difference ].If it is
, aren't the cheap goods here better?
View detail
It becomes impossible to have used the pure Helmet lock with Muffler exchange, and purchased. Because it will be troubled if a Helmet is stolen while traveling. Attachment is OK in one Plus driver. However, when it fixes to a Handle, unless it chooses the
It becomes impossible to have used the pure Helmet lock with Muffler exchange, and purchased.
Because it will be troubled if a Helmet is stolen while traveling.
Attachment is OK in one Plus driver.
However, when it fixes to a Handle, unless it chooses the place whose Handle is a straight line, it cannot fix well.
The
key attaches three.
Since a price is also cheap, it is satisfactory.
View detail
If it does not take care at the time of attachment, and a Rubber is removed like me, there is fear which a crack attaches. I think that they are good goods except it since attachment is possible with one Driver and fear of the theft of a Hel
If it does not take care at the time of attachment, and a Rubber is removed like me, there is
fear which a crack attaches.
I think that they are good goods except it since attachment is possible with one Driver and fear of the
theft of a Helmet also disappears.
View detail
It purchases here for the Helmet-holder missing item of PMC. It is shocking that the price was however reduced after he purchased. It seems that attachment will become a narrow place inevitably if interference with a Tank is avoided or a rain escap
It purchases here for the Helmet-holder missing item of PMC.
It is shocking that the price was however reduced after he purchased.
It seems that attachment will become a narrow place inevitably if interference with a Tank is avoided or a rain escape is considered while
attachment place has a degree of freedom.
--
-- Since the jaw string of a Helmet is short although he wanted to act as Locke where a Helmet is covered over a Mirror in fact ...
only this much is unavoidable -- coming out -- the shin.
Locke itself is used satisfactorily.
View detail
The Hell lock to which it is attached from origin on the side face of the Motorcycle was attached in order to act to a handle part as Locke of the Helmet, since a position passes in the bottom, and it was user-unfriendly. Since one Screw only fastens the
The Hell lock to which it is attached from origin on the side face of the Motorcycle was attached in order to act to a handle part as Locke of the Helmet, since a position passes in the bottom, and it was user-unfriendly. Since one Screw only fastens the attachment itself, it is easy. Moreover, since the goods themselves can be made very strong, crime prevention nature is very expectable structure. View detail
[Webike Monitor] attachment can also be performed with one Driver, and since a fixing position is also a Handlebar, it is easy to attach.
[Webike Monitor]
attachment can also be performed with one Driver, and since a fixing position is also a Handlebar, it is easy to attach.
View detail
Compared with a Helmet holder authentic positive in a Yamaha, it is somewhat large. since the key portion and the Holder portion are divided as for user-friendliness -- -- only a few is easy-to-use. Whichever it uses, it is practical
Compared with a Helmet holder authentic positive in a Yamaha, it is somewhat large.
since the key portion and the Holder portion are divided as for
user-friendliness --
-- only a few is easy-to-use.
Whichever it uses, it is practically equal if it gets used to it.
since there is almost no
spread, even if it decides the rest by a Design --
-- it may be good.
View detail
[Webike Monitor] Although the Full face currently used every day is put in under the sheet,Since texture attached in order to cover a light thing instead of that he wanted about 1 more person and the Convenience hooks resembles the Handl
[Webike Monitor] Although the Full face currently used
every day is put in under the sheet,Since
texture attached in order to cover a light thing instead of that he wanted about 1 more person and the
Convenience hooks resembles the Handle of PCX, there is no resistance,although it was from origin, it attaches also like -- it will become, if suitable --
, although it was hard to attach in the problem of Size ? just for a moment,It is with all its strength, if it does hard, he would like to use as an attached
Convenience hooks, but since credibility of a Hook is a little unknown,
appearance used only as a light thing is pleasing.
View detail
It is with how it is that the Plating cap of a Key-cylinder part separates in the vibration grade of a Motorcycle although it is very much satisfied with the function, the price, and the Design and is found useful usually also. -- Although it is
It is with how it is that the Plating cap of a Key-cylinder part separates in the vibration grade of a Motorcycle although it is very much satisfied with the function, the price, and the Design and is found useful usually also. -- Although it is
vibration, it is 4 cylinders of CB400SF and a BALIUS, and is a vehicle type with comparatively less vibration than a single cylinder etc.
And it separated from both vehicle types during the run.
(Smile) At the
time, since the parts which separated in the neighborhood of the Handle post were caught, the direction of わい and a BALIUS was reattached by the Aron Alpha.
It has not separated yet from after
adhesion.
They are
, however a place to improve.
--
-- the direction which is a future and purchase schedule -- please remove a Cap purposely and paste up by an Aron Alpha (smile) --
* -- although it is natural, a Key stops turning to the inside of a Key cylinder so that it cannot enter
View detail
It attached to the Upper cowl stay of NSR250. Before , although the SEA-BASS pure Helmet holder was attached, on the occasion of attachment removal, the key was operated and it ran away. When locked, this product has an unnecessary key and
It attached to the Upper cowl stay of NSR250.
Before
, although the SEA-BASS pure Helmet holder was attached, on the occasion of
attachment removal, the key was operated and it ran away.
When locked, this product has an unnecessary key and it is easy to operate it.
Since it can attach with one
Driver and cannot remove in a locked position, I think that crime prevention nature is high.
View detail
It was attached to the handle of CB750. Since I purchased without investigating the diameter of a handle, it was not able to be attached as it was, but when one side (rubber by the side of a lock) was removed the rubber for a crack prevention for path adj
It was attached to the handle of CB750. Since I purchased without investigating the diameter of a handle, it was not able to be attached as it was, but when one side (rubber by the side of a lock) was removed the rubber for a crack prevention for path adjustment, it has attached. However, because the rubber was removed, there is an unstable feeling a little, but I think that it would be stabilized if a cushion seat (thin) etc. are processed and attached. Although it is larger than the lock of Suzuki genuine product which was being used before, I think that the appearance would be ok even if it attaches, since texture is not bad. View detail
PCX may be designed as semi-helmetl premise, and it is useless for fullface, (if it is attached, helmet hits the paint application position of a cowl and it is cracked), I attached this. Texture is rather good and its plating and color tone of the handl
PCX may be designed as semi-helmetl premise, and it is useless for fullface, (if it is attached, helmet hits the paint application position of a cowl and it is cracked), I attached this. Texture is rather good and its plating and color tone of the handle also suit. A key is required for lock release and a key is not needed for locking. It can be used as a convenience hook. I purchased after comparing many things, and since better product is more expensive and I don't feel to purchase it as a helmet lock, possibly this product may be the best choice in terms of a balance of a price, a function, and appearance. View detail
It is small and appearance is a good product. Locke is also solid. However, since the path was large, the attached screw was [ American handle ] insufficient for die length at all. Therefore, an one star minus is used.
It is small and appearance is a good product.
Locke is also solid.
However, since the path was large, the attached screw was [ American handle ] insufficient for die length at all.
Therefore, an one star minus is used.
View detail