Reviews
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA MT-25
It is easy to install.
The product is fine, but it can only be installed on the Left Side, and the position is a bit low. View detail
OffHelmet with Glasses
It is especially convenient when attaching and detaching the OffHelmet.
The fogging is eliminated by removing it even at traffic lights, and it can be quickly put on for running.
Convenient anyway.
View detail
It is outstandingly light!
Was the one you received as per Image?
It is cooler than it looks in Catalogue.
[How did you feel about the Fit?
It seems to be a Japan-only spec, but the inner pad is harder than the Japan product.
It is hard and rough and has a low Fit feeling.
How was your experience with it?
The lightness is outstanding, I always had neck pain with SS, but my head was light and easy.
The aerodynamic characteristics are also better than OGKShoeema.
Wind Cutting sound and quiet characteristics are normal.
What are the specifications of the product?
Ventilation is normal within legal speed limits.
Included Parts:is a good value for the money.
It even has a Dark smokeSeal, Pin lock and ShieldFilm.
[Was there anything that disappointed you?
When the Shield lock is opened by Button type, there is no flange on the Shield.
It is difficult to open.
The cap is not compatible with wireless microphone.
Fit feeling is quite low. 。
How did it compare to other products?
Material at this price:Carbon products are not found in domestic products.
It is lightweight and has good aerodynamic characteristics.
The interior quality and fit feel is low.
Other items that would be helpful
Deciding Factors for Purchase/Included Parts:Presence or non-existence of Included Parts/Points to Note/Opinions and Requests to the Manufacturer
Rear spoiler is available as an Option.
View detail
Installed on a KTM890Duke-R
The product is presented as being for a KTM 790 Duke, but I was able to install it on an 890 Duke R with no problems. There are about 15 bolts that need to be removed, and two bolts need to be replaced with the supplied ones in order to sandwich the supplied spacers (long and short) for product installation. In the process of removing the ground cable holder mounting bolt, adding the short spacer, and replacing the bolt, the original locktite was in the way, making it difficult to twist the bolt in, so we used a tap to prepare the female threads. Also, the short spacer had to be installed between the vehicle side parts, so dexterity was required. View detail
DAYTONA Re-Helmet
I bought this for use after touring. I used to use a Plasma Raster, but the airflow is so much stronger than the Plasma Raster, so I am expecting a Large for use after touring in the middle of summer. View detail
It didn't fit.
I bought it because WeBig says it fits New Model from 2023,
Could not install.
I checked KIJIMA's Homepage and it was 2023 - not compliant,
View detail
![[K・TOUR] Helmet Holder](https://img.webike-cdn.net/catalogue/images/97787/80x564x28030xa0_TS.jpg)
(after neg. verb stem) had better (verb)
[How is it used?
I bought this product to prevent my helmet from being stolen when touring or going out.
I used to not have a Helmet lock, so I had to carry my Helmet with me when I got off my Motorcycle.
I was always worried about hanging it on Mirror because I think it is easy to be stolen.
Was the one you received as per Image?
KITACO
KITACO in the world
It's in a clear bag.
Quantity:2pc keys are included, so even if you lose one, you can rest assured that you have another one!
Was the installation difficult?
May be difficult for beginners
All the Rear cowl has to be removed, so if you have never removed a cowl before, please do so carefully.
If too much force is applied, the plastic part is prone to cracking.
The bolt on the Tandem Footpeg is coated with Screw Lock, so it was a bit odd to remove the Bolt Large, but it is not impossible to remove.
How was your experience with it?
I was attracted to this product because of its mounting position, so it is not very noticeable and I think it is very beautiful.
I think the recommended point is that it is the same color as the bright black Tandem Footpeg, so it does not disrupt the balance of the entire vehicle.
However, I have no problem because I have a 1 pc exhaust system, but if you use the OEM Dual Exhaust System, the helmet will come in contact with the exhaust system, and if you apply the helmet when it is hot, the interior of the helmet may melt, Be careful!
[Included Parts:were they on?
Key Quantity:2pc
Quantity:Note that if you lose both 2pcs, you are finished!
[Was there anything that disappointed you?
OEMExhaust System may not be so easy
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Recommended for a single-pipe Exhaust System!
View detail
Mellow SmokeSilver
Mellow Smoke is difficult to see due to the reflection on the inside, so the inside is darkened. [Color] Smoke might be better.
I thought I had been gently wiping water droplets off with Towel after normal maintenance and after using it in the rain a few times, but the plating is peeling off and it is hard to see these days.
Very Delicate Plating.
It did not last a year.
View detail
I am satisfied
Semi-smokeGold
(before a negative form) (not) at all [Color] The color is clear, bright, and appears close to that of the naked eye, which is what I expected.
ARAI is also systematically installed, and anyone can easily install it once they get the hang of it.
View detail
Very good service, a genuine Suomy dark smoke visor. View detail
It is light and nice!
First of all, it looks cool! I bought it because it is lightweight and has a good fit. I used to use FOX V1, but the Visor was broken due to a fall and I had been using it for about 5 years, so I was in trouble without repair parts. The lightness is about the same as the FOX, and when I wore it for a long time, I got a little headache, but the Zealot is from Japan, so the fit is good and I can wear it all day and still be comfortable! I spoke with the Zealot store at the Nagoya MotorcycleShow, and they said they have repair parts in that color, so I confirmed that I can use it without any worries. Now I am thinking of using Carbon as well. View detail
![[FOGWIN] Universal Mini F01](https://img.webike-cdn.net/catalogue/images/15288/wins-japan_4560385767012_1_TS.jpg)
FOGWIN
My impression of wearing it on SIMPSON's RX-10 is that it gets stuck when opening and closing the Shield. I think this takes some getting used to, but I didn't mind it too much. I think this is something you have to get used to, but I didn't mind it too much. View detail
Helmet lock
Installation is easy
Even at touring destinations, it was inconvenient to remove the Seat and put on the Helmet NORMALSpec. so it became convenient.
View detail
Quantity:Set purchase is recommended.
I think it is good because it is dedicated to this product. The quality and functionality are just as I expected, and I have no complaints. View detail
What?
I have been interested in this Manufacturer's Helmet for a long time, so I took the plunge and bought it. The quality is great for the price, and I wanted several of them! View detail
Good fit
I like LEAD's Helmet because of its high cost performance.
I think the size is a little loose, but it holds up well.
Opening and closing the chin guard requires a lot of force. sun visor did not interfere with Glasses.
The cap is Large size and a bit heavy, but it's a System helmet so it's probably TradeOff.
The ventilation area is very elaborate with Qu-Rear Parts, red stitches, and other small details.
It will be useful for rehydration etc. in summer.
View detail
Satisfied
I can't see the Mirror's face.
I am satisfied with my purchase from
View detail
I've been curious about this for a while
I thought it might be a little heavy.
When it came time to put on Touring.
Fit feeling is good without worrying about weight
I'm glad I bought a new one.
View detail
![ULOOK Blaze Mirror] Anti-fog Film for Helmet for CWR-F2/R](https://img.webike-cdn.net/catalogue/images/133234/4color_TS.jpg)
Fits: Others Compatible with CWR-F2Shield, Others Compatible with CWR-F2RShield, Others X-Fifteen, Others Z-8
Cost-effective!
OEM Mirror shields are expensive, but this product provides the same level of replacement as Mirror shields and is very cost effective.
However, it was necessary to adjust the Pin lock with the adjusting Screw to make it adhere.
View detail
Alternatives to OEMHolder
The EliminatorOEMHolder was in the Seat and could not be used without removing it, so we installed this one.
The OEMBolt was unusually hard and it took a while to get it right, but I was generally satisfied.
View detail