Reviews
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA MT-25
It is easy to install.
The product is fine, but it can only be installed on the Left Side, and the position is a bit low. View detail
OffHelmet with Glasses
It is especially convenient when attaching and detaching the OffHelmet.
The fogging is eliminated by removing it even at traffic lights, and it can be quickly put on for running.
Convenient anyway.
View detail
Installed on a KTM890Duke-R
The product is presented as being for a KTM 790 Duke, but I was able to install it on an 890 Duke R with no problems. There are about 15 bolts that need to be removed, and two bolts need to be replaced with the supplied ones in order to sandwich the supplied spacers (long and short) for product installation. In the process of removing the ground cable holder mounting bolt, adding the short spacer, and replacing the bolt, the original locktite was in the way, making it difficult to twist the bolt in, so we used a tap to prepare the female threads. Also, the short spacer had to be installed between the vehicle side parts, so dexterity was required. View detail
![[K・TOUR] Helmet Holder](https://img.webike-cdn.net/catalogue/images/97787/80x564x28030xa0_TS.jpg)
(after neg. verb stem) had better (verb)
[How is it used?
I bought this product to prevent my helmet from being stolen when touring or going out.
I used to not have a Helmet lock, so I had to carry my Helmet with me when I got off my Motorcycle.
I was always worried about hanging it on Mirror because I think it is easy to be stolen.
Was the one you received as per Image?
KITACO
KITACO in the world
It's in a clear bag.
Quantity:2pc keys are included, so even if you lose one, you can rest assured that you have another one!
Was the installation difficult?
May be difficult for beginners
All the Rear cowl has to be removed, so if you have never removed a cowl before, please do so carefully.
If too much force is applied, the plastic part is prone to cracking.
The bolt on the Tandem Footpeg is coated with Screw Lock, so it was a bit odd to remove the Bolt Large, but it is not impossible to remove.
How was your experience with it?
I was attracted to this product because of its mounting position, so it is not very noticeable and I think it is very beautiful.
I think the recommended point is that it is the same color as the bright black Tandem Footpeg, so it does not disrupt the balance of the entire vehicle.
However, I have no problem because I have a 1 pc exhaust system, but if you use the OEM Dual Exhaust System, the helmet will come in contact with the exhaust system, and if you apply the helmet when it is hot, the interior of the helmet may melt, Be careful!
[Included Parts:were they on?
Key Quantity:2pc
Quantity:Note that if you lose both 2pcs, you are finished!
[Was there anything that disappointed you?
OEMExhaust System may not be so easy
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Recommended for a single-pipe Exhaust System!
View detail
DAYTONA Re-Helmet
I bought this for use after touring. I used to use a Plasma Raster, but the airflow is so much stronger than the Plasma Raster, so I am expecting a Large for use after touring in the middle of summer. View detail
I am satisfied
Semi-smokeGold
(before a negative form) (not) at all [Color] The color is clear, bright, and appears close to that of the naked eye, which is what I expected.
ARAI is also systematically installed, and anyone can easily install it once they get the hang of it.
View detail
Very good service, a genuine Suomy dark smoke visor. View detail
It is light and nice!
First of all, it looks cool! I bought it because it is lightweight and has a good fit. I used to use FOX V1, but the Visor was broken due to a fall and I had been using it for about 5 years, so I was in trouble without repair parts. The lightness is about the same as the FOX, and when I wore it for a long time, I got a little headache, but the Zealot is from Japan, so the fit is good and I can wear it all day and still be comfortable! I spoke with the Zealot store at the Nagoya MotorcycleShow, and they said they have repair parts in that color, so I confirmed that I can use it without any worries. Now I am thinking of using Carbon as well. View detail
Helmet lock
Installation is easy
Even at touring destinations, it was inconvenient to remove the Seat and put on the Helmet NORMALSpec. so it became convenient.
View detail
What?
I have been interested in this Manufacturer's Helmet for a long time, so I took the plunge and bought it. The quality is great for the price, and I wanted several of them! View detail
Satisfied
I can't see the Mirror's face.
I am satisfied with my purchase from
View detail
I've been curious about this for a while
I thought it might be a little heavy.
When it came time to put on Touring.
Fit feeling is good without worrying about weight
I'm glad I bought a new one.
View detail
Alternatives to OEMHolder
The EliminatorOEMHolder was in the Seat and could not be used without removing it, so we installed this one.
The OEMBolt was unusually hard and it took a while to get it right, but I was generally satisfied.
View detail
Fits: HONDA 400X, HONDA CB500X, HONDA CBR500R, HONDA CBR400R (2013-)
Installed on a CBR400R 2024
Installed on a CBR400R 2024.
I was able to put it on with no problem.
View detail
![YX-6 ZENITH Graphic [Zenith Graphic] Helmet](https://img.webike-cdn.net/catalogue/images/73802/907911788L00_TS.jpg)
Goggles are good to use.
Usually SHOEI and ARAI use L Size and THOR uses XL.
I bought XL but Cheek pad was too tight so I bought Cheek padXLW and installed it.
→The result is a Size/Fit feel similar to ARAI's XL.
Goggles are 100% Accuri2 (image) The Racecraft2 is delicate because the nose guard interferes with it.
With Goggles, I can hear the driving noise, and with Shield, it's nice because it's very sound insulated.
Visor is too small to be effective in city driving. Styling is more important than function.
View detail
Convenient
I don't like to put Helmet on Mirror, so I've been using it.
I used to take my Helmet with me even when I was going away for a bit.
That has been resolved.
It was easy to install
View detail
![ULOOK Blaze Mirror] Anti-fog Film for CPB-1V Helmet](https://img.webike-cdn.net/catalogue/images/133234/4color_TS.jpg)
Fits: Others Compatible with CPB-1VShield, Others Glamster
I highly recommend it because it is not too dark!
"Green Light" I purchased Mirror!
There are other options for color variations, so you can choose the one you like best. The installation was easy:just remove the Shield from the Helmet and fix it to the Pin lock, so anyone can do it, and there is no need to buy an additional Shield. Moreover, the price is low compared to the cost of buying an additional ShieldBody.
I was surprised at the anti-fogging effect when I actually used it.The color of the Green mirror is SMART, you can just barely see your face inside the Helmet, but from the inside it has a Gray tint. It is like wearing thin Sunglasses.
It allows you to concentrate on driving during the day and also blocks reflected light. However, it sometimes felt a little dark when driving in Tunnel or at night, but it was not a hindrance.
View detail
Fits: Others Compatible with CF-1WShield, Others KAMUI III, Others SHUMA
It's insanely good.
It's great, I think changing the Shield makes it too dark, but this makes it so much easier to see both day and night. I think I made a good purchase. View detail
Fits: Others Compatible with VAS-V MVShield, Others RX-7X, Others ASTRAL-X, Others ASTRO-GX, Others RAPIDE-NEO, Others XD, Others VECTOR-X
Recommendation
The NORMALClear shield can be made Mirror, so it is the best cosmetic solution, and it is about half the price of a Pin Lock Seat on a Mirror shield. Also, VAS-V shields are especially good because you can make the entire shield Mirror when the shield is closed. View detail
Inner Visor. [Color] Can be changed to Clear.
I would like to share with you my impressions on the day I received the Helmet,
Size is currently using two SHOEI Z-7s and an XR-1100. The Z-7 is still in good condition with no interior wear and tear, while the XR-1100 is 12 years old and the interior is thinning like seasoned seaweed.
The size of this product is M and Z-7 is also M Size, but Z-7 is more Tight (cheeks).
The lightness felt like there was no difference in the experience. It is a little strange.
I chose this product because of its price, design and [Color] The Inner Visor of Clear can be used. (Mirror shield and [Color] (ClearInner Visor was also ordered at the same time.) I've been wondering what helmet to get next for about 3 years, and this has been an option for quite some time, but recently [Color] I felt like I knew I could use Clear's Inner Visor and decided to go with it.
The only thing that bothered me was that there was a stain on the synthetic leather on the underside of the Cheek pad. The Cheek pad is not visible once it is covered, so there is no problem, The Visor is also OK because I don't use it often and I don't feel like I can tell when I test drive it. I am satisfied with Large because I got a good product at a low price. I can finally retire my XR-1100.
View detail