Reviews
Fits: YAMAHA BirdCity, YAMAHA Tricity155, YAMAHA BirdCity, YAMAHA Tricity155
It didn't fit.
I bought it because WeBig says it fits New Model from 2023,
Could not install.
I checked KIJIMA's Homepage and it was 2023 - not compliant,
View detail
in jeopardy
Flash mirror [Color] Purchased Clear. When backlit, my face appeared on the entire backside of the Shield and I was in danger of losing my vision.
When backlit, the back side is also Mirror. It is dangerous, so it was removed after one Touring and became Garbage.
View detail
It peels right off.
For Z8,,
2023/03/20 Purchased a Blue Type of this
2023/09/12 Red Buy this
I didn't want to change the color.
Mirror coating on the surface peels off quickly.
Coating to repel water is still peeling off easily, even the mirror part is peeling off.
At first it peeled off when I wiped it with SurLuster0, which is self-inflicted because the warning on this product says to use water only and apply Towel lightly....
(Mirror shield on Z7 didn't peel no matter how much I scrubbed it, so ......)
I was careful with the new Redi Type, but even with very careful care, it was peeling.
This is a RECOMMENDATION for those who can afford to replace it in six months.
The attached image is fogged up with breath for clarity.
View detail
Could not be used for X-ROAD II.
This is not Webig's fault, but we tried to install this on our X-ROAD II, but there was no space to insert it, so we could not install it.
The package says it is also compatible with II, but the product labeling is incorrect to begin with.
View detail
Fits: Others ASTRO-GX, Others RX-7X, Others ASTRAL-X, Others VECTOR-X, Others XD, Others RAPIDE-NEO
uncomfortable feeling
Anti-fog Film for ULOOK VAS-V Item No. : UL-01T01
Color; Dimmable For ASTRO-GX
OEM Pin Lock Seat (MVPin lock120) is not a problem. I was told that dimming is determined by the amount of UV light, but it is winter so I could not check.
View detail
It's not the same.
Is it really for EX-ZERO?
I'm disappointed with all the gaps.
View detail
Street riding only
The FRP was so thin that it cracked easily when I hit it. View detail
Not effective for the price!
Not effective for the price, and as the word of mouth, my hair became flattened after touring about 180 km. The prongs turn into a pain over time, even when placed inside the HelmetPad. I don't think I will ever use it again and would return it if I could. View detail
Fits: Others X-14, Others Z-7 RYD, Others X-TWELVE, Others XR-1100, Others Z-6, Others QWEST, Others NEOTECII, Others GT-AirII, Others GT-Air, Others NEOTEC
I don't feel the effect of polarization.
I wanted the polarization feature and also to make Clear shield a little darker because the Inner Visor of GT-AIRII is not dark enough.
It is said to be polarized, but I do not feel the effect.
The fake polarized Sunglasses sold on Amazon for about 2,000 yen are more effective in polarization.
Sunglassesetc. polarized light is used to reduce the reflection of light from the front glass of passing cars,
I had the impression that I could see Driver's face, and the trees and the sky's Blue were darker, but these are not there at all.
I guess it was the light, but sometimes it was difficult to distinguish between wet and dry road surface conditions.
Also, the features say that it reduces glare on the road surface, but to us, it seems to make it glare more.
Most of all, what bothers me the most is that the color appears to change at a dizzying rate/severe to adhere to compared to OEM.
This is disappointing because I had excessive expectations for polarization.
View detail
So bad
It's getting chubbier by the day, and I realize that the early days were genuinely good ones. View detail
String position is Gap.
The position of the string is much more Quantity when it is worn.:Pair (for Left and Right) It is asymmetrical. It is clearly marked as decorative, but it is quite cheap-looking. It was light and toy-like. View detail
I will never buy LS2 again.
Was the one you received as per Image?
I bought it because I fell in love with it at first sight when I saw the picture on the product description Page.
But the product I received was Black, unlike the picture.
I would not have bought it if it was this color.
Manufacturer claims that there is no problem because of the light and individual differences.
Perhaps it would be Silver like the description Page if it were shot using a photographic Light stronger than the direct sunlight of mid-summer noon.
However, this is a motorcycle helmet. Naturally, it is supposed to be used outdoors.
And this looks like Black even in direct sunlight at noon in midsummer, no matter how anyone perceives it. Helmet in Black. Id.
I doubt the good sense of the manufacturer to sell a product with a picture that looks like silver, using excuses such as individual differences and the sensitivity of the light.
For the guests (at least for me). I've been duped." I can only feel that this is the case.
[How did you feel about the Fit?
It is not AsianFit, so the top and back of my head is too much on the side of my head for my typical Asian head.
Moreover, the cushion on the side of the head is thin, and there is a groove carved into the liner in that area, and the protrusion of the groove hurts when it hits.
The narrow frontage makes it hard to put on and take off, and the cheek pad is tight.
On the other hand, if it is covered, Quantity:Pair (for Left and Right) The Fit feeling of the "Fit" is not bad, and the advantage is that the Income speaker is also close to the Plus for quietness and improved sound quality.
How was your experience with it?
Upper Ventilation is useless.
As shown in the attached photo, the head interior is fully covered.
Therefore, the head is completely separated from the wind path from Ventilation by the interior.
This would not allow the head under the interior to feel the wind, even if the wind did pass through.
In addition, if you are a person who fits your head, the Cushion on the top of your head could completely block the passage of the wind.
For now, we'll just drill holes in the cap and the liner." I have to wonder if this is the idea.
Ventilation at the mouth, on the other hand, has a large opening for better airflow.
In addition, while helmets with Inner Visor generally do not have an air inlet from the forehead due to their structure, this product has a structure that allows air to flow from the forehead to the inside of the Inner Visor, which is a notable advantage (although the effect was not felt).
What are the specifications of the product?
The Microphone storage space for Income at the mouth is kindly designed.
[Was there anything that disappointed you?
Interior sewing was shoddy, with some gaping from the center and some forgotten stitches. The interior sewing was shoddy, with some gaping from the center and some forgotten stitches.
The Speaker of Income is covered by a Chin strap.
Income mounting is not well considered, as evidenced by the Inner Visor Slide in a position suitable for Income mounting, and there is no suitable flat surface for taping (inevitable floating edges).
How did it compare to other products?
Motorcycles and wears are popular among overseas manufacturers, but when it comes to helmets, they are treated as third-rate products and not even looked at by many people, which is strange until now.
If this is the case ... Helmet of Foreign Manufacturer is no good." It is only natural that this would be the case. I learned a lot.
View detail
High Garbage.
I opened it from the box and InnerSunshade is already removed.
The interior smells damp and pungent.
Are they covered in China under the guise of inspection?
If I pay 30,000 yen and receive such Garbage, I am usually displeased.
I don't mind if it's expensive, I just want you to raise the quality.
View detail
This is not a conversation.
The part where the clasp is hooked fell off during the product installation stage, and the product became Garbage as it was.
I bought this product because I believed in the brand, but this is not a good thing.
It's also a security product, for one thing.
View detail
Is it something like this?
I bought an inexpensive Winds Helmet for my commuting For Scooter, but the quality of the ARAI, Shoei, and Shark I have owned is not nearly as good as the HJC from a neighboring country, and at the time of purchase it was still in the Quantity range.:Pair (for Left and Right) The thickness of the Cheek pad of the Cheek pad is slightly different. I have never seen such a manufacturer before. I had no choice but to buy only the pad from Webig, but this time, the One Side has a wrinkle on it, which I can't see if it is stitched or not. Well, it is cheap. View detail
Good for circulation? Is it?
I've heard that it tingles and is good for circulation, but is it a compromise? Not for me.
The tingle was really tingling and painful, so I gave up after 10 minutes.
I guess it depends on the type of head Large Kisa Helmet. Impossible
View detail
Not available
Installed on a ZX25R.
The installation itself is very easy and can be done quickly with a Hexagonal Wrench.
After installation, I tried to use it, but to my surprise, the Wire length was too short to use.
I have a Smartphone Holder attached to the Daytona Clamp Bar, but it gets in the way and hits me.
I am considering whether to remove the Smartphone Holder or the Wire lock that I have installed.
View detail
quality
I had been wearing a SHOEI XXL, so I ordered an XXL. It fits very well, but it doesn't fit my big head and my head hurts when I run for a long time. When I opened the box when it was new, I thought it looked different from the picture, but after a while, the Outer and Inner were not glued together and had come off and were out of alignment. You should always check it carefully when it comes.
Design and functions are good.
View detail
Shield quality is not good so what you see is distorted.
There is distortion in the Shield and what I am looking at appears distorted. My eyes and head hurt after using it for only 10 minutes to get to the bike parking lot. When I used it for 3 days (round trip, so about 20 minutes in one day) to see if I could get used to it, the headache got worse and I had headaches and nausea all day long. It is possible that this kind of quality is still acceptable and a replacement may be the same. I have used more than 20 Helmets from various Manufacturers and this is the first time I have ever had such a problem. View detail
Fits: HONDA CB125R, HONDA CB250R, HONDA CB250R, HONDA CB150R, HONDA CB300R, HONDA CB150R, HONDA CB300R
The structure can be unlocked in seconds without a key if you know how to install it as it is.
The details will not be disclosed for security reasons, as those who have purchased the product will be able to tell if they see it, but if the product is installed as is, it can be unlocked with a simple tool.
It can be improved with a simple modification, but why did they make it this way? It is too easy to remove even as a remedy for lost keys when you go out.
I guess it is supposed to be used as a simple lock for a short time, but I wonder about it.
The bolt that secures the lock to the bracket should have been made of something more difficult to remove, such as Torque, and if this product is used, it would be better to take countermeasures and use a strong screwdriver to attach it.
View detail