Reviews
Blue is easier to see.
[How is it used?
I used it for commuting and touring, so this will be my Impression of it.
The hats used are RX7-X and AstroGX. The same VAS-VShield can be used for both.
In this case, Semi-smoke×Blue was selected.
Was the one you received as per Image?
It was just like the Image, this is my second ExtraShield and I bought the first one in Semi-smoke×Gold.
Neither the Gold nor the Blue shield I purchased this time has yet to show any peeling of the Mirror coating as reported by other impresarios.
How was your experience with it?
In Semi-smoke×Gold, while it has a very high anti-glare effect during the day and has the Merit of being the most transparent inside of Semi-smoke and not being able to see the face, it is difficult to see in the Tunnel or in dimly-lit Timing, and the Level is not useful at night.
Therefore, in this issue of Color:Select Semi-smoke×Blue, which has a yellowish appearance.
No anti-glare effect can be expected. Ordinary semiSmoke Shield has better anti-glare performance.
The visibility is indeed a yellowish vision. This is very easy to see.
Contrast is clearer, so it feels really easy to see. I have also used it on night roads,
It was not difficult to see on streets with streetlights or on main roads, and I was able to drive without anxiety.
However, it was indeed difficult to see on roads with few streetlights. Still, it is much better than GoldCoating.
[Points to note]
Mirror coating seems to scratch easily, so it is better not to scrub too hard.
Also, you should not rely on the way the product looks in the product image or on the Manufacturer's website, as they may have incorrect notations.
How did it compare to other products?
In fact, I also purchased Semi-smoke×Red, which was the best.
All of this is in Semi-smokeBase, but Red is more visible at night and in Tunnel than Gold,
Red is recommended if you want to use it for Almighty because it is more anti-glare than Blue.
Gold for those who aim for an anti-glare effect or want to keep their faces out of sight.
If visibility is a priority, Blue is recommended for Circuit driving, etc!
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Shipping is good.
It is only now possible to attach an external DialWire lock to the Handlebar.
I think what you want to do is reasonable.
However, we still would like to see some improvements due to the use of existing locks.
1.Dial is Smaller
I don't want to touch it in the winter or anything.
2.Wire is too long.
Handlebar position could be half as short as it is now.
3.Lock position
Not the other way around, as they tend to pop up on the Grip side and interfere with each other.
I dare to put it on the other way around.
It would be nice if this area could be improved, but it is regrettable.
View detail
Useful if you have it ^^.
[How is it used?
When you stop at Convenience or some other place where you stop for a bit.
Was the one you received as per Image?
Large Image Street
How was your experience with it?
It did not go into the CYGNUS Hell Lock pin as is.
[Points to note]
The pin holes are unexpectedly small, so some modifications may be necessary depending on the vehicle.
How did it compare to other products?
No comparison
Other items that would be helpful
As a side note, the included Carabiner is too small.
The 100 yen shop items of today are of higher quality.
View detail
A satisfying gem
Product Name
ZEALOT ZEALOT MadJumperII CARBON HYBRID [MadJacket2 CarbonHybrid] Helmet
Item Number
MJC0012/M
▼ Installer
170cm 80kg shoei→L Size
Number of man-hours
5 minutes
Why did you choose this product?
Because I wanted a Helmet that was light and had MFJ through it. Also, because I had used the Zealot last time.
Was the one you received as per Image?
It was cooler than Image. silver was shining.
Was the installation difficult?
Nothing too difficult, Visor was easy to remove.
How was your experience with it?
The last time I tried it, it was L Size, but this time I went for M Size. If your SHOEI is L size, I recommend you to go for a smaller size.
[Included Parts:were they on?
LogoSeal, Instruction Manual, etc.
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: Others A-FORCE RS, Others FF-COMFORT, Others X-ROAD
Seriously, it doesn't fog up.
It was easy to replace the Visor with Standard Equipment's Visor. View detail
Mitsuba sankowa Anti-fog film for ULOOK VAS-Z
Item received.as in picture,packing was excellent.shipment arrived on time.my 5th purchase so far.no issue.product as advertised.install and vision a bit blur,not sure if it's supposed to be that way or the product is not well store or old stock.can refer to the picture,the bottom is the pinlock install and the upper is the visor. View detail
I had no intention of ever buying it.
I knew about the product, but until now I had no intention of buying it because I didn't think I'd have any use for it,
I borrowed them from an inn when I got wet in the rain during last year's Hokkaido Touring and they worked so well that I bought them.
Universal, as it can be used not only for helmets and gloves, but also for boots.
View detail
Cannot be installed with Carrier
Ease of use of Helmet lock is normal
Installation was easy with tools.
Note that if a KIJIMA Rear Carrier is attached, it will overlap the Pipe and will not be usable.
It's about making sure you use other locks.
View detail
moderate [Color] Smoke
Especially in the summer, from the prevention of eye fatigue and designability. [Color] Smoke was selected. My personal impression is that the center line is not lost even in the Tunnel, and the blackness of the Tunnel is just right. [Color] I think it is Smoke. The photo shows a comparison of the inside of the Shield with and without a white paper placed inside the Shield, and with about 1 meter of frontal light shining on the inside of the Shield. During the daytime, the inside of the Shield was not fully visible through the Mirror because of the Visor's shadow.
Also, the curvature of the Shield is Large, so distortion is a concern, but it was not a concern with this unit.
More importantly, the reduction of outside light that I expected from Inner Shield is only (I would) recommend using this product only in true backlit situations, as the distortion of the Shield is a painful Level when used for long periods of time. In that sense, I think this product is effective.
View detail
helmet
This helmet has nice form, Glass can removed easily and I can stick the 1973's Honda logo to cover the screw hole to attach the glass look so fresh and classic View detail
Installation of helmet holder on XSR125
We install most of Motorcycle's helmet holders on each vehicle we deliver.
As usual, it is useful for Helmet lock when parking the bike.
It is a vehicle specific product, but I had to shave it down a little to install it because it hits the side cowl a little.
View detail
It is the best cospa
Nothing to complain about. It is a safe Brand. View detail
Place Helmet on Top Bridge and lock it.
The standard helmet holder of ZX14R was placed on the Left Tandem Footpeg, but when the exhaust system was replaced, the Tandem Footpeg was removed and the helmet came in contact with the silencer. The silencer is no longer used since it is placed on the Top Bridge because the rubber may melt when the silencer is hot.
I had been leaving it unlocked, but since I bought a new helmet, I was concerned about theft and decided to purchase a retrofit helmet holder.
It was attached to the Multi Bar with Smartphone Holder so that the Shield could be opened for easy key operation.
It lacks a SMART appearance, but it has achieved its purpose for now, so I will use it for the time being.
I might remove it if I can't stand it anymore (laughs).
View detail
To relieve the anxiety of a short break.
I bought this product because the CBR1000RR SP sc77 does not have a Helmet holder in OEM and there is no Screw hole to install a Type product that mounts on the Frame.
I used to hook it up to Mirror when I took a break at a touring destination, but it was half the fun with the fear of theft.
After installing this one, I was able to leave the vehicle body with some degree of peace of mind, so I think it is actually quite cost-effective as a cost-effective solution.
Installation is not particularly difficult as long as the size of the car body is carefully checked.
If I had one request, I would have liked the key to be 4-digit instead of 3-digit. I thought that if you leave for a long time for meals, etc., it might try all patterns and be unlocked.
View detail
It peels right off.
For Z8,,
2023/03/20 Purchased a Blue Type of this
2023/09/12 Red Buy this
I didn't want to change the color.
Mirror coating on the surface peels off quickly.
Coating to repel water is still peeling off easily, even the mirror part is peeling off.
At first it peeled off when I wiped it with SurLuster0, which is self-inflicted because the warning on this product says to use water only and apply Towel lightly....
(Mirror shield on Z7 didn't peel no matter how much I scrubbed it, so ......)
I was careful with the new Redi Type, but even with very careful care, it was peeling.
This is a RECOMMENDATION for those who can afford to replace it in six months.
The attached image is fogged up with breath for clarity.
View detail
Looks as good as expected
Buy Blue in Semi-smokeBase.
The color of the look is beautiful, just as I expected.
I wore it and actually saw it running, and the visibility [Color] Clear and no problems.
Mirror coating peels right off." I have not experienced such a problem with the one I purchased, so far.
View detail
Second, ◎ on ThirdHelmet
[Glasses etc. The head is SHOEIx-twelve L Size].
This is my first ShieldJet. It's comfortable, no shaking, wide field of view, and no wind in my face! I used to use a half cap for a little riding, but I don't need it anymore.
Once you get used to it, you can put on and take off the helmet while wearing Glasses. Loose around the ear Space may be working. Perhaps that's why head circumference (Around the forehead) and the chin area seemed tight. Size is Small. I can understand the opinion that. … or maybe I should have tried wearing an XL. (Sweat)
I did not feel any discomfort from the wind from the Shield, including the sound. I felt coolness around my temples, but there was a buzzing sound instead. I tried driving another motorcycle at nearly 100km/h, but there was no change in the loudness.
Shield is virtually fog-free! If you drive out a bit, I can say that none of them are. In winter (It was a warm day.) This impressed me.
The quality of the paint, buckle, and shield opening and closing is generally high, and the level of satisfaction is high. However, when you wear it, the well feeling when you hold it is not like a certain Top model, and you feel the price range. Quality and texture The 5 star rating of "5" is a cosmetic evaluation.
View detail
SlimBase
Slim and solid. View detail
Not bad, but ….
I put it on SHOEI's GramStar.
I was going to replace it with Mirror shield, but when something that looked white was released, I bought it.
It is a Pin lock modoki, but it is a mysterious product with color.
As you can see in the image, it does indeed add color, and the view you see is a Yellow color.
At first I wasn't sure about this, but once I got used to it, it was easy to see at night.
It was unfortunate that it was more transparent from the outside than I had expected.
Also, the installation was moderately Large strange. I found an official video of the installation, but I could not imitate it because it seemed that they put so much effort on the Level. I could not imitate it.
Large was strange depending on the direction of warping, but I managed it.
View detail
Very good product
I like it because it is Design cleaner than other companies' products.
Installation was easy and the feel is very good.
Spare key is also included.
The bolt is also a stainless steel bolt.
View detail