Reviews
Also recommended for Helmet's Display!
I recommend this to anyone who wants to display or store their helmet on the wall. I used 4 of these to hang my helmet on the wall like a showroom. View detail
For street riding Motorcycle only.
I bought this for my motorcycle for street riding only. The fit is good and it's easy to put on and take off. View detail
Helmet holder for convenience.
It is easy to install, but it becomes a little loose after a long time even if you use the attached Rubber depending on the place. As a countermeasure, after degreasing the mounting part, I put Double-sided Tape on the Both Sides of the Rubber. Plating is beautiful, but it would have been even better if there was Black because I wanted to put it in a place where it is not noticeable. View detail
![Helmet Ventilation Liner [Skull And Bones].](https://img.webike-cdn.net/catalogue/images/2697/ho-air_hd-no-02-01_TS.jpg)
I no longer worry about how my hair looks when I take my Helmet off!
First of all, the ventilation inside the Helmet will be better.
If you don't want your hair to be floppy when you take off your helmet, it's a good idea to buy this.
Demerit can be painful if you wear it for a long time.
View detail
Bad fitment
It does not fit as shown in the photos. The bolt screws are aligned correctly however the lock is mechanism is not flushed with the pillion footrest as shown in the photos. I am riding BMW S1000R 2017 manufactured. Seems like this is only for BMW S1000R 2016 and below. Please rectify. Thanks View detail
Cospa best
I bought Gun meta.
I use it when I commute to work.
It's cheap and I'm happy with the color.
The moat around the ears is so deep that you can wear it for a long time.
It doesn't make my head hurt.
View detail
Recommendation
Grom OEM's Helmet lock needs to be removed from the Seat.
I can't use it, but Seat is too hard to remove.
If you use the seat bag, it's almost impossible to use.
Universal Product that can be fixed to an easy to use Brake bracket
View detail
Fits: KAWASAKI Ninja 250, KAWASAKI Ninja 400 (2014-)
NINJA400 OEM's worst position to improve
The standard Helmet lock on NINJA400 is the worst place in the world to lock a helmet and it's completely unusable as is. "Ninja" I think it's a shame for Brand.
So, I bought and tried this Bracket, using your Impressions as a guide.
The results were good, and the Helmet lock, which was completely unusable in the standard position, was, well. "Normal It became possible to use it. It was finally possible to improve from the Large Minus of the standard state to the vicinity of ±Zero with this Bracket. (laughs)
A T30Size HEXWrench is required to remove the standard lock and install it on the new Bracket. Make sure you have the proper tools.
When you remove the standard lock, only the bracket remains and it looks ugly, so remove it.
By the way, the bolt that comes with the KIJUMABracket (middle photo) is an all screw (ordinary bolt) that is about 5mm longer than the standard bolt (top photo), but it does not have the thicker root of the bolt needed for Footpeg Bracket positioning. I have separately prepared a different length of the same shape as the standard Footpeg BracketBolt (photo:below). (This way you can make sure that Quantity:Pair (for Left and Right) (The look and feel will match up with the
After using it, I was finally able to use the Helmet Lock normally. If you have an opportunity to use your helmet lock on your commute to school, work or touring, I recommend you to buy this Bracket and improve it as soon as possible.
View detail
It's pretty dark.
The NORMALShield on the Gringo S was a clear type. [Color] I also bought Smoke.
The construction is a little different from the included Helmet Shield. It has a built in well print, and the color of the button is like Brass. But it is not impossible to install it and it is not inaccurate.
Moreover, since there is no surface treatment, etc., there are no small scratches that stand out.
But it's especially common in North American products. "Too dark [Color] Smoke is still alive and well, and it's also quite dark. You can't drive on country roads at night, I'm afraid.
The eyes are hidden and very good Parenthesis, but it is difficult to use it for the purpose of running at night in the countryside, and in the end [Color] I put it back on Clear.
View detail
![Ventilation Liner For Helmet [Rossi].](https://img.webike-cdn.net/catalogue/images/2697/ho-air_hd-no-06-01_TS.jpg)
How well it works!
I bought it because a friend who uses it recommended it. It definitely creates a physical gap, so you can feel the breeze. Also, it's good for those who care about their hair... (I don't care for it myself.) I hope it's a little cheaper View detail
Size is set to Large texture
Size:It's free, but you probably need to be at least L to be able to use it.
Recommendation. "Yes" But as long as Size is correct....
The choice of Helmet is surprisingly narrow. Even if you like it, it may be free or only MSize or better.
I'm sure they're trying to keep up with male standards and averages, but maybe that's one of the reasons why there aren't more female Riders.
View detail
It doesn't fit the BMW S1000R 2020.
The holes are in place and can be installed, but they are not in shape with the 2020 Tandem Footpeg Bracket and will not be attached to SMART. The fitment is from 2015, but I believe it is shaped to fit up to 2017 and earlier. View detail
Compared to the Key Type, it has some advantages, but it's a little more subtle.
It is good that the key does not increase in Large, but when it is attached to the Handlebar, the rattling sound always comes out by the vibration of Motorbike, and it is unpleasant. It is a little large in comparison with the key type. It is good if it is a little more Compact. View detail
I was hoping it was the European version.
I was expecting it to be a European version, but the fitting feeling was not so different from FOR JAPAN MODELManufacturer, and I was a little disappointed.
My head is long front to back, so I was looking forward to it.
View detail
I can't wear it because it hurts my ears.
XL, but smaller. I don't know if my ears are in a different position than other people's, but they don't fit in the space that holds my ears.
I can't wear it because it hits somewhere on the Band and hurts.
Material:Carbon Style is quite modern and nice.
Plastic parts are not good. Gold fastening is cheap. I think JAPAN is good after all.
I considered CUBT with JAPANCarbon Hell, but I really don't like that Mark on CUBT.
View detail
It's easy to wear.
It's not as safe as a full face, but it's very convenient for long distance use. This is a solid manufacturer's half helmet and I use it when I ride my scooter. View detail
![Ventilation Liner For Helmets [Checkered].](https://img.webike-cdn.net/catalogue/images/2697/ho-air_hd-no-05-01_TS.jpg)
You need Ventilation on the Helmet.
Without air ventilation in the forehead area, you may not feel the effect as much.
As for Hairstyle, I definitely feel like it's not falling apart there either.
View detail
It's not bad in its own way.
I think it's a decent build for a relatively cheap Helmet. The weight, wind cutting sound, and interior are inferior to the more expensive products, but for the price, it's not so bad.
The only thing that has always bothered me is the sound of opening the Inner Visor, there is a push button on the outside of the Helmet and the sound of the spring and the impact of the spring when you push it open is very annoying and noisy inside the interior. This needs to be improved. Clunk!
The wind cutting sound is also so-so, but it doesn't bother me so much once I get used to it. Because it is this price, it is the feeling that it can be put up with. I like the shape and design of the cap.
Ventilation is not surprisingly bad.
View detail
Present to the family
I bought this for my father who sometimes rides a scooter.
Until then, I bought the Size from Home Center.:I was wearing a Free Interior Pe LePera Helmet.
I bought this one because I thought it was still better.
But to be honest, the texture is about the same etc. or slightly better.
The Helmet is probably ARAI or SHOEI, after all.
View detail
![FF-COMFORT [FF/Comfort] Helmet](https://img.webike-cdn.net/catalogue/images/4044/ffconfort_ph_TS.jpg)
Good for the price, but is the Visor distorted?
The Fit feeling was right in my head.
The wind cutting sound is quite loud. When you open the frontal inlet "Go. And when it closes. "P It's like that. But I didn't understand the Ventilation effect very well. You won't mind if you think it's like this.
The best part? I feel that the side of my vision is distorted.
Individuals, individual differences? There may be such things as the following, but I used it hard for about a year and couldn't stand it, so I bought a new one.
View detail