Reviews
Since it had carried out custom and there was no pure holder, it purchased. I think that installation is possible for a favorite place since the path of the pipe to attach can attach from 22 mm to 25 mm. It is preeminent also to the seen eye!!
Since it had carried out custom and there was no pure holder, it purchased.
I think that installation is possible for a favorite place since the path of the pipe to attach can attach from 22 mm to 25 mm.
It is preeminent also to the seen eye!!
View detail
By the type which cannot be used unless it removes a sheet, since it was user-unfriendly, the helmet lock of KSR was purchased. Attachment is very easy and possible with one driver. I think that there are few fears of a helmet being stolen the who
By the type which cannot be used unless it removes a sheet, since it was user-unfriendly, the helmet lock of KSR was purchased.
Attachment is very easy and possible with one driver.
I think that there are few fears of a helmet being stolen the whole helmet lock since the screw of attaching does not come out unless it opens a lock part.
In a helmet lock, I think whether to be a recommend most.
View detail
It attached to the drag star 1100. When the helmet was put on the mirror, it fell, the mirror shield was made spoilt and it was being looked for whether there would be any good thing. If it attaches like a picture, fixation can be done easily.
It attached to the drag star 1100.
When the helmet was put on the mirror, it fell, the mirror shield was made spoilt and it was being looked for whether there would be any good thing.
If it attaches like a picture, fixation can be done easily.
View detail
It attached to the handlebar of 09Z1000! Attachment is easy with one screw. Moreover, Z1000 is not easy-to-use only by two wires for Locke being contained. They are a helmet theft and that at which it can laugh and which is twisted at the touring
It attached to the handlebar of 09Z1000! Attachment is easy with one screw.
Moreover, Z1000 is not easy-to-use only by two wires for Locke being contained.
They are a helmet theft and that at which it can laugh and which is twisted at the touring point --
Since it gets wet with rain, without a helmet also becoming upside-down, it does not become precocious.
Although cost performance is good, it is just going to call it kana which should just also have had Black in the key cylinder besides the shutter of rain water and dust prevention, and plating.
View detail
Although it was from the first, since it was hard to attach, he bought the helmet lock of the hornet. Structure is good considering a price and it also attaches the key three. However, packing was thick and attachment was not easily completed for
Although it was from the first, since it was hard to attach, he bought the helmet lock of the hornet.
Structure is good considering a price and it also attaches the key three.
However, packing was thick and attachment was not easily completed for a handle...
View detail
It has attached to the handlebar. It is easy-to-use. If the portion which hooks a helmet is thin to a slight degree, it is easier-to-use.
It has attached to the handlebar.
It is easy-to-use.
If the portion which hooks a helmet is thin to a slight degree, it is easier-to-use.
View detail
Since the helmet holder of the hornet was attached beside [ engine ] left-hand side and it was hard to use it, it attached this helmet lock. Although the handle brace is also attached, Locke also of the helmet can be carried out without a problem.
Since the helmet holder of the hornet was attached beside [ engine ] left-hand side and it was hard to use it, it attached this helmet lock.
Although the handle brace is also attached, Locke also of the helmet can be carried out without a problem.
View detail
If a side bag is attached, it becomes impossible to use, although the helmet lock is attached to the eliminator from the first. It purchased and attached by the reason for saying. I think that it is a place with quite strong sufficient one as a Go
If a side bag is attached, it becomes impossible to use, although the helmet lock is attached to the eliminator from the first.
It purchased and attached by the reason for saying.
I think that it is a place with quite strong sufficient one as a Good point.
Since it is plating, he is smart.
However, in a Bad place, - Locke must turn and be going to just act, also when carrying out as Locke of the key.
- Once it attaches using an attached screw, it becomes impossible to take.
(Although a crime prevention top is a good thing, change of a fixing position, etc. become impossible) - it is somewhat large -- the impression of being was received.
I think that it can make a little smaller.
Although he wanted to attach to a sissy bar, it did not suit in the thickness of the sissy bar.
since -- thickness was adjusted and attached with the elastic band.
It is if it is touch also with a little thinner OK one... Evaluation is a two stars from the above.
View detail
It attached to Arai MZ. Although the jaw string's snap button was obstructive and was not able to let metal fittings pass, your impression has been attached by bending and referring to the stretch of the (1) portion of metal fittings. Although the
It attached to Arai MZ.
Although the jaw string's snap button was obstructive and was not able to let metal fittings pass, your impression has been attached by bending and referring to the stretch of the (1) portion of metal fittings.
Although the jaw string which remained collected by the belt stop (2) which suited at hand, he turns up and can also usually stop a snap button part to a passage.
Since a jaw string cover cannot be removed attached, when washing an inner package, it is necessary to remove.
It is troublesome to bend and carry out the stretch of the metal fittings to the degree of wash, and reinforcement is also likely to fall gradually.
Although the handiness of buckle fixation is charm, I feel that it may stop using before long for the reason mentioned above for it.
View detail
Fits: HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON Universal
It is easy attachment to SUPOSUTA. Attach [ to a motorcycle ], he can feel easy about a helmet while traveling.
It is easy attachment to SUPOSUTA.
Attach [ to a motorcycle ], he can feel easy about a helmet while traveling.
View detail
Since the helmet holder is not attached to F650GS (TWIN), it purchases. This product was purchased in order to unite with a black frame. But it is hard to use that it must turn and act as Locke of the key also when acting as Locke just for a momen
Since the helmet holder is not attached to F650GS (TWIN), it purchases.
This product was purchased in order to unite with a black frame.
But it is hard to use that it must turn and act as Locke of the key also when acting as Locke just for a moment.
View detail
It attached to the handlebar of HORNET250. Since it was hard to use the pure helmet holder in the side of HORNET, it purchased. Texture is also good and recommendation in a user friendly manner.
It attached to the handlebar of HORNET250.
Since it was hard to use the pure helmet holder in the side of HORNET, it purchased.
Texture is also good and recommendation in a user friendly manner.
View detail
It uses for the system helmet of a yamaha, and ZENITH. It was able to let the snap currently attached to the chin strap from the first pass, without cutting, although it is last-minute. It is easier to have cut, since it was strained considerably
It uses for the system helmet of a yamaha, and ZENITH.
It was able to let the snap currently attached to the chin strap from the first pass, without cutting, although it is last-minute.
It is easier to have cut, since it was strained considerably and it let it pass.
If pliers hold and pull a chin strap, it passes along a direction not to cut.
Since it is the structure which adjustment of die length tended to carry out and was carried out quite firmly, a problem does not seem to have fixed power.
Although there is no telling whether what actually happens in case of an accident ... attaching from D ring, although it is natural -- also removing -- it is easy.
However, keep in mind that a possibility that it becomes impossible to use a helmet hook in a vehicle type in part is just possible.
I think that it is OK mostly.
View detail
It becomes a form which makes a helmet upside-down, when it rains, inside will get wet in BICHABICHA, and since it becomes a form where inside sponge is pulled, inner sponge is likely to be damaged in a pure helmet lock. On the other hand, if it attac
It becomes a form which makes a helmet upside-down, when it rains, inside will get wet in BICHABICHA, and since it becomes a form where inside sponge is pulled, inner sponge is likely to be damaged in a pure helmet lock.
On the other hand, if it attaches to a handle, there is neither a fear of rain entering nor a fear of cracking sponge here!! Since it becomes many forms to put about a meter or near a keyhole, it can prevent that others take doubtful action on their own motorcycle.
View detail
It attached to the handlebar of CB400SF REVO. Since the helmet transformed the cover in the chain cover, the helmet holder beside a sheet was purchased. Also on a tank, a helmet is found useful now. Texture also matches the handle well.
It attached to the handlebar of CB400SF REVO.
Since the helmet transformed the cover in the chain cover, the helmet holder beside a sheet was purchased.
Also on a tank, a helmet is found useful now.
Texture also matches the handle well.
View detail
It purchased simultaneously with a jet helmet. To a part good and common at a flip up base for him to use although it is breakage which when suitable and depends width, I thought that rigidity was solid with it being satisfactory at all. [ of invasion
It purchased simultaneously with a jet helmet.
To a part good and common at a flip up base for him to use although it is breakage which when suitable and depends width, I thought that rigidity was solid with it being satisfactory at all. [ of invasion ]
However, since the motorcycle which has ridden is a gorilla, a speed is a talk in the state where it is seldom taking out.
when a pushing snap, taking up and down, and parts loosen and opening and closing of a shield are also opened, it falls for a while -- there are also likely to be nothings very.
I think that this is good goods since a price also thinks that it is cheap compared with other things.
View detail
For it, working is kind above all. [ who has hung glasses ] Although it does not understand whether even free becomes a fault, when carrying out a back check by lane change, it is worrisome that a shield runs by a wind for a while. using a working
For it, working is kind above all. [ who has hung glasses ]
Although it does not understand whether even free becomes a fault, when carrying out a back check by lane change, it is worrisome that a shield runs by a wind for a while.
using a working shield -- for the first time -- it is -- Although the comparison cannot do how other things are ... also falling, even if it raises a shield to up -- or since the shield and the base are a set above all, I think that it is very profitable.
At the time of a run, let's give a shield absolutely and merely run it.
Although I thought that it was only itself that makes such a blunder, it might have flown, when running raising once.
Of course, a shield is a flawed article.
TOHOHO ...
Goods are good.
Yes!
View detail
This is a recommend excessively. It is easy to cover a hook greatly lightly. Time to afflict to a helmet was lost and it became easy. Since a fixing screw is also an inner side of a hook, a crime prevention top also has no problem. Althoug
This is a recommend excessively.
It is easy to cover a hook greatly lightly.
Time to afflict to a helmet was lost and it became easy.
Since a fixing screw is also an inner side of a hook, a crime prevention top also has no problem.
Although a price is cheap, it does not become precocious, but probably, it will be appropriate, considering this degree of satisfaction.
It is a recommend.
View detail
By the ability not to use unless it removes a sheet one by one, since it was inconvenient, the helmet holder of CB750 was purchased as external. In the case of, it attached to the handlebar. If the adjust rubber of * mounting port satisfied dramat
By the ability not to use unless it removes a sheet one by one, since it was inconvenient, the helmet holder of CB750 was purchased as external.
In the case of, it attached to the handlebar.
If the adjust rubber of * mounting port satisfied dramatically is removed as touch used more than in January, it will be attached also to a frame, but it is safer for those who care about the wound to a car body not to remove, since a rubber becomes a cushion (it also becomes the prevention from a sideslip by vibration) of wound prevention.
The thing of a price for which structure is also comparatively good, the thread part has become an inside of a holder, and it has a configuration of theft prevention,
It is GOOD also at the appearance of the car body attached thanks to the texture of plating! In a direction, they are recommend items as the helmet holder of a self-vehicle having dissatisfaction, or wanting people's helmet credit profit place which carried out the tandem (^^)v
View detail
Since VTR cannot use a helmet lock unless it removes a sheet one by one, this is necessaries. A helmet can be bundled with Locke who fixed to the handlebar, and it can put on a tank. Since a switching action is also light, it is dramatically easy-
Since VTR cannot use a helmet lock unless it removes a sheet one by one, this is necessaries.
A helmet can be bundled with Locke who fixed to the handlebar, and it can put on a tank.
Since a switching action is also light, it is dramatically easy-to-use.
View detail