Reviews
Goggles are good to use.
Usually SHOEI and ARAI use L Size and THOR uses XL.
I bought XL but Cheek pad was too tight so I bought Cheek padXLW and installed it.
→The result is a Size/Fit feel similar to ARAI's XL.
Goggles are 100% Accuri2 (image) The Racecraft2 is delicate because the nose guard interferes with it.
With Goggles, I can hear the driving noise, and with Shield, it's nice because it's very sound insulated.
Visor is too small to be effective in city driving. Styling is more important than function.
View detail
Using Zenith:・・・・
Was the one you received as per Image?
It was exactly as shown in the Image and was well made.
I am not a cheap or bad person.
[How did you feel about the Fit?
I chose SizeFree, but it's not too large.
It can be used normally, it's just that it's only for city driving, PetitTwo should be considered as the way forward.
How was your experience with it?
The feel is good, it is light and the basic performance is TIGHTLY.
What are the specifications of the product?
Smoke Shield (sold separately) is used.
There are no other special functions, and it is Simple.
[Was there anything that disappointed you?
Nothing in particular. Frankly, I feel better because I had no expectations at all.
How did it compare to other products?
No comparison.
It was purchased for 125?, so it was a cosmetic choice.
Since my Motorcycle is a Yamaha, I inevitably chose a Yamaha product.
I think the performance is sufficient for my needs, although the Fit feeling etc. is not bad,
Overall, it is loose, so it is not suitable for long distances. It is considered to be only for short distances.
I think it is necessary and sufficient.
View detail
For moped
I purchased this for my parent's moped JOG.
Size:It has two ventilation holes, which is good for ventilation during the summer season. The removable interior is also in beige and looks stylish. It is made by Yamaha and has none of the cheapness of the half helmet sold at home centers.
The only problem was that the Buckle that holds the chinstrap was thin and very difficult to fit.
View detail
It is the best cospa
Nothing to complain about. It is a safe Brand. View detail
Second, ◎ on ThirdHelmet
[Glasses etc. The head is SHOEIx-twelve L Size].
This is my first ShieldJet. It's comfortable, no shaking, wide field of view, and no wind in my face! I used to use a half cap for a little riding, but I don't need it anymore.
Once you get used to it, you can put on and take off the helmet while wearing Glasses. Loose around the ear Space may be working. Perhaps that's why head circumference (Around the forehead) and the chin area seemed tight. Size is Small. I can understand the opinion that. … or maybe I should have tried wearing an XL. (Sweat)
I did not feel any discomfort from the wind from the Shield, including the sound. I felt coolness around my temples, but there was a buzzing sound instead. I tried driving another motorcycle at nearly 100km/h, but there was no change in the loudness.
Shield is virtually fog-free! If you drive out a bit, I can say that none of them are. In winter (It was a warm day.) This impressed me.
The quality of the paint, buckle, and shield opening and closing is generally high, and the level of satisfaction is high. However, when you wear it, the well feeling when you hold it is not like a certain Top model, and you feel the price range. Quality and texture The 5 star rating of "5" is a cosmetic evaluation.
View detail
Helmet is cheap, but...
[How is it used?
Purchased to install on YX-6 ZENITH Shield purchased to use for mountain play. lack of Sense and no improvement in driving skills. The Eternal Beginner. I am a "I" who breathes hard when I attack a difficult area, and my shield fogged up and my visibility was zero when I used an adventure helmet.
However, if you use GogglesSpec., you will have to take off and put on the helmet frequently in a sweaty condition, and it is very troublesome to take off and put on the Goggles.
In order to meet my selfish needs, Pin Lock Seat was introduced.
How did you like it?
It doesn't fog up at all." It is not that the visibility is completely different with and without this product, especially in winter. I can't do without it." It is a product that I can't let go of as much as I would like to.
At a time when this type of product was not on the market. Anti-fog Spray. Ya The "stone? water (which was said to have an anti-fogging effect)." etc., on the motorcycle while frequently applying them to the Shield.
How did it compare to other products?
In case you're interested, it's exclusive to ZENITH's YX-6. (This is a sister product to HJC's HJH133 DS-X1, so it can also be used here.) So, when it comes to other products. UniversalPin Lock Seat This is the case
The anti-fogging effect will be the same, but the dedicated product is easier to position since it is attached along the Shield's claw, and the price is almost the same.
[Points to note]
When installing, slightly distort the Seat to the opposite side to align it with the Shield's claw, but do not use too much force as this may result in a crease, or if you work with dirty hands, you may install the Pin Lock Seat with dirt on the inside. So, please work without hesitation wearing rubber gloves or using beautiful hands.
The claw on the Shield side is surprisingly fragile and can easily break if you try to install it by force... (I have experienced this with other helmets... I cry) Work gently and carefully.
Read the Instruction Manual carefully and be careful not to use Chemicaletc. that should not be attached to the Pin Lock Seat.
【Included Parts:presence or absence】.
Pin Lock SeatBody and Instruction Manual are included.
[ITEMS TO BUY TOGETHER
None in particular, but once installed I wanted to replace it with a Mirror Shield or Smoke Shield (along with a Pin Lock Seat)." If this is the case, it will be a double hassle, so it is better to purchase and install the Shield together with the Shield you want to use during normal operation to save time.
Opinions and requests to Manufacturer.
For Helmet of the same Manufacturer Universalization to some extent." The helmet itself is more reasonable than those made by ARAI and SHOEI, but the Pin Lock Seat is about the same price, which seems somewhat overpriced.
[Points to note]
When installing, slightly distort the Seat to the opposite side to align it with the Shield's claw, but do not use too much force as this may result in a crease, or if you work with dirty hands, you may install the Pin Lock Seat with dirt on the inside. So, please work without hesitation wearing rubber gloves or using beautiful hands.
The claw on the Shield side is surprisingly fragile and can easily break if you try to install it by force... (I have experienced this with other helmets... I cry) Work gently and carefully.
Read the Instruction Manual carefully and be careful not to use Chemicaletc. that should not be attached to the Pin Lock Seat.
【Included Parts:presence or absence】.
Pin Lock SeatBody and Instruction Manual are included.
[ITEMS TO BUY TOGETHER
None in particular, but once installed I wanted to replace it with a Mirror Shield or Smoke Shield (along with a Pin Lock Seat)." If this is the case, it will be a double hassle, so it is better to purchase and install the Shield together with the Shield you want to use during normal operation to save time.
Opinions and requests to Manufacturer.
For Helmet of the same Manufacturer Universalization to some extent." The helmet itself is more reasonable than those made by ARAI and SHOEI, but the Pin Lock Seat is about the same price, which seems somewhat overpriced.
View detail
Very good
I am very happy with the design that I never get tired of and the security of wearing it. View detail
Fits: Others YJ-21 ZENITH, Others YJ-21 ZENITH Graphic
Not much change.
I bought the standard Size because it was too tight.
It is only to the extent that it seems to have become a little kitsamashi.
View detail
The pressure on the cheeks is somewhat better.
Replacing it will relieve some of the pressure on the cheekbones.
But,
It is better to increase the HelmetSize by one size than to replace it with a thinner Cheek Pad.
I recently thought it might be a good idea...
View detail
Cheap Helmet, but I think you'll be happy with it.
My head size is 28cm and I used to wear a YJ-19 M size, but after wearing it for a long time, my head was tightened and it hurt. I bought a YJ-21 in L size thinking it would be comfortable as long as the size was right. I bought the L size YJ-21 and immediately drove it for about 2 hours. The wind cutting sound is even quieter. The amount of wind inflow during driving is clearly increased, and it is comfortable. The only complaints I have are that there is a certain smell, and when I tried to trade in my YJ-19, for some reason the Zenith Helmet was excluded. View detail
GlassesNG
good
The basic construction is solid.
It is smooth to put on and take off, and the head feels held firmly in place.
The chinstrap length is just right and the D Ring is easy to use.
Shield height can be set freely, and raising and lowering is smooth and easy to use.
bad
The ear area is a little tight.
No space for the glasses, making it difficult to wear them smoothly and causing ear pain.
I don't have Sun visor, so it's hard in the evening, especially on long distances.
Vent hole at the mouth was broken (no problem, so I continued to use it).
It is good for those who do not use Glasses and want an inexpensive, solid full face for short distances.
View detail
Attached to ZenithLSize
ZenithLSize's Cheek pad was too tight and was replaced with a thinner pad.
It can be worn EXACTLY and no longer feels oppressive.
View detail
Parenthesis is better than the product photo!
This is my second Gibson from Y's Gear, having used the previous model. The height of the chin guard of the previous model was too short, and my chin was exposed when I put it on, but this time there is no such problem and I feel secure. Another point is that it is lightweight compared to other helmets. The price is very reasonable for this performance. View detail
Fits: YAMAHA YJ-14 for ZENITH, YAMAHA YJ-16 for ZENITH
Shield
It is easy to use. It is not sold in stores, so purchase is through Internet sales. View detail
Helmet shield
I am very happy with the Mirror shield in Blue as it is the same color as the Motorcycle. View detail
Large Wind Cutting sound Large Kiku Minus
■ Design
Logo in Matte Black and Color:The screen is gray with a large, long, oval-shaped silhouette, giving it a slim impression. The interior color is Brown, which gives a fashionable impression.
■ Function
It has basic features such as GlassesSlit, ShieldHolder, Ventilation, etc. It is equipped with a sun visor and is easy to raise and lower. The SpeakerPocket makes it easy to install the Income or Speaker kit by simply inserting the speaker into the pocket. The One Touch Buckle is different from OGK's, but the buckle is a small type, so it is a little difficult to find the lock when you put it on.
Performance
As the title says, Wind Cutting sound is very Large, perhaps due to the shape of the helmet, but it is a Large sound compared to the same Jet helmet YJ-20 of the same company or OGKCUBT's Jet helmet of about 20,000 yen of other companies.
Also, running noise can be heard reasonably well. In other words, the sound insulation is not as good as a helmet priced below 10,000 yen. The weight is average, but the inside shape is a little large, so there is plenty of room even if your head or face is large.
■ Optional item
Unlike the YJ-20 that just came out, it is not treated for fogging. Rain, of course, but temperature differences can cause extreme fogging. Therefore, a Pin Lock Seat is a must. In my case, I had to wait for several months to get the special Pin Lock Seat. In the meantime, I used the Universal Type, but the Universal Type is perfectly fine, and I don't feel much change after replacing it with the dedicated one.
General Comment
Depending on the driving attitude and the motorcycle, wind cutting noise is terrible at speeds over 60 km/h, so it is suitable for short-distance touring on downhill roads. The Merit is the smallest size, but it is also the least expensive, stylish, and the size is large, so it can be easily attached and detached. Those who use the Merit at high speeds and those who require good sound insulation should be very careful when purchasing it.
View detail
The anti-fogging effect is great!
When installing, static electricity? Dust is called for, so be careful in the working environment!
Visually, there is a space between the Shield and the Seat, so the transparency is not as good as it was before the Shield was installed, and I feel a slight distortion.
However, I am Large satisfied with the performance of the product. It is really nice and safe to not fog up, and I would definitely recommend wearing them, rather than opening the Shield a bit and feeling cold. I am a Glasses user.
View detail
Fits: Others YJ-21 ZENITH, Others YJ-21 ZENITH Graphic
Cheek pad loosely changed
The difference is only a few millimeters, but the change is very Large.
Before the replacement, I couldn't chew gum because I chewed the inside of my cheek,
After the replacement, it is completely gone and comfortable.
View detail
As expected of an OEM Product, it fits perfectly!
I bought this with spare parts for the Helmet I purchased.
I haven't replaced it yet, but from what I've seen, it's an OEM Product.
It is the perfect Size.
View detail
liked it
I have a bad neck and back, so when choosing a helmet, the first thing to consider is how light it is. I prefer helmets that have no unnecessary bumps on the exterior and no sun visor, so recently I was having trouble finding a good choice. I hardly ride it in summer, but I think it has good ventilation performance, and for the price, it is surprisingly good because of good fitting of the shield and less wind cutting noise and drafts. The weight is also light. Standard helmets will come to your neck in 2 to 3 hours, but this one lasts a day...........................heavier than Balance.
When
Overall, I like it very much, but the Anti-Fog Shield is vulnerable to moisture, and if you touch it when there is condensation, the surface will become rough and visibility will be poor. What do you think the durability is like? Will it still come off in about a week? When I tried it just after it came out (4~50 years ago?) I don't even like the way it looks.
View detail