Reviews
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA MT-25
It is easy to install.
The product is fine, but it can only be installed on the Left Side, and the position is a bit low. View detail
DAYTONA Re-Helmet
I bought this for use after touring. I used to use a Plasma Raster, but the airflow is so much stronger than the Plasma Raster, so I am expecting a Large for use after touring in the middle of summer. View detail
Alternatives to OEMHolder
The EliminatorOEMHolder was in the Seat and could not be used without removing it, so we installed this one.
The OEMBolt was unusually hard and it took a while to get it right, but I was generally satisfied.
View detail
Fits: HONDA 400X, HONDA CB500X, HONDA CBR500R, HONDA CBR400R (2013-)
Installed on a CBR400R 2024
Installed on a CBR400R 2024.
I was able to put it on with no problem.
View detail
There is a LARGE difference between "yes" and "no"!
Installation is easy.
The bracket is a little long, so it feels a little wobbly when you move it, but it's no problem to wear the helmet.
However, it is rather close to footpeg, so you may hit Helmet if you are not careful.
View detail
Large Helmet holder with hooks
The helmet holder on the OEM motorcycle is small and difficult to use, so we purchased it.
The ENDURANCE:Endurance MultiCenterCarrier shown in the photo was installed because there was a place where it could be mounted.
The large hooks make it easy to attach a helmet.
View detail
Maybe it's just my imagination, but it seems to work!
I have been using it for over a year now, and in that time, the inside of Helmet has never started to smell, so I think it works reasonably well.
I own 3 Helmets and use them differently, and I always deodorize each one with this after Riding. Two of them can be washed with the interior removed, but I have not washed them yet. (Don't tell me it's dirty.) Even so, there is no smell. I always put on the helmet after putting on the head cap, so it may be related to the fact that sweat does not penetrate directly into the helmet's interior.
The first, Jet helmet, was purchased with RedCUB 5 years ago and was used year round at first, but about 3 years ago I bought a half helmet for summer use and used it in fall and spring, and about 2 years ago I bought a System helmet for winter use and limited it to spring and fall use.
In other words, the interior washable Jet helmets are worn almost exclusively in the spring and fall when the weather is nice, so they do not sweat much, and the washable winter System helmets are worn almost exclusively when the temperature is cool, so they may not smell as much. Still, the non-washable half helmets are worn during the sweaty season, but they do not smell. This may be due to the fact that the wind does not blow in as much and the head cap keeps sweat out.
The top surface on which the helmet is placed is sloped toward the front, but I feel like the helmet might slide down. The vent is raised, so I don't think it will get caught and slide down...but it would be nice if it were a little gentler.
The body is Type C and comes with a Type A-C Cable.
I always use it at maximum air volume? 3 hours operation, but with a 10000mAh Mobile Battery, I can run it 3 times +/-, which is quite eco-friendly.
View detail
They come in handy
Even if it gets wet from sweat or rain, you can dry and deodorize it all together just by leaving it here.
It is likely to show its true value especially in the summer.
It is simple to make, but I feel it is effective.
It is good to have consumable Parts such as Filter so that it can be used all the time.
View detail
Absolutely necessary!
It is a must-have product because Eliminator's OEM Product is not easy to use.
It is easy to install and very user-friendly.
View detail
RE:MET
It is useful for drying wet helmets and gloves on rainy days.
Air volume control (low, medium, high) and Timer (1, 3, 6 hours) are convenient.
It is helpful because it dries a Large body overnight. (Used on high, 6 hours)
I think the deodorant is working because it doesn't smell bad. Maybe in the summer the effect will be a huddlerill?
View detail
Very convenient!
First of all, this product is per Large! It's a Dial type so you don't need a key! I didn't realize how convenient it would be to just use it…The texture of the switch when you press it is also great! The weight is reasonable and the build quality is good! Once you use it, you will never go back to the OEM Helmet lock which is hard to use! I will never go back to the OEM hard to use Helmet locks once I have used them! View detail
I had no intention of ever buying it.
I knew about the product, but until now I had no intention of buying it because I didn't think I'd have any use for it,
I borrowed them from an inn when I got wet in the rain during last year's Hokkaido Touring and they worked so well that I bought them.
Universal, as it can be used not only for helmets and gloves, but also for boots.
View detail
Installation of helmet holder on XSR125
We install most of Motorcycle's helmet holders on each vehicle we deliver.
As usual, it is useful for Helmet lock when parking the bike.
It is a vehicle specific product, but I had to shave it down a little to install it because it hits the side cowl a little.
View detail
characteristic (of someone)
No human being is odorless.
Anything that is in close contact with the body will have body odor attached to it.
I bought it to maintain hygiene.
I think it is necessary in summer because of the large amount of sweat and sebum.
View detail
Sweat sebum Prevention
I would prefer not to have my own smell, which has been stained over the years, not to say it is offensive.
I bought it because I am concerned about perspiration in the summer and sebum often in the winter, and I want to control the smell as much as possible.
View detail
It would be more convenient to have
There is one on the Body, but I bought it because it is inconvenient to use it without removing the Seat, and also because it is essential when I tandem the body.
I am satisfied, including the price.
View detail
Helmet can be cleaned!
[How is it used?
I can dry my helmet and gloves,
It is especially useful in the summer.
Was the one you received as per Image?
It was just like the Image in the photo shown.
How was your experience with it?
Bracket for hanging gloves can be stored in the back,
It is good that it is not bulky when stored.
It comes with a Timer, which is convenient because it can be left alone.
I purchased Black, but the USB Cable that came with it was White,
We felt that it would be better if the Cable could also be color-coordinated.
[Points to note]
ACAdapter is sold separately, so commercially available USBCharger (2A or more) The following items are required.
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA MT-25
Easy to use
The vehicle I bought had a KIJIMA helmet lock, but I had trouble hooking the U-shaped hook from the side, so I didn't use it.
It is very easy to use because it is hooked from below.
View detail
Old-fashioned position
The CB1000R does have a helmet holder, but it is under the rear sets. SV650 has a helmet holder that can be placed between handlebar and tank, but CB1000R seems to fall off. I don't like it because it might scratch the tank or something. I bought a helmet holder which is attached to the Tandem Footpeg in the traditional position, and I am glad that it does not seem to damage both the motorcycle and the helmet, although it depends on the shape of the helmet. View detail
Easy installation.
I am new to Motorcycle (CL250) without a Helmet folder,
I realized that the Helmet folder was very important items for me,
During the break-in period, I purchased a fast-track.
The installation was so easy that it was not enough.
View detail