Reviews
Fits: HONDA Ape 50, HONDA Ape 100, HONDA Ape 50, HONDA Ape 100
I was resistant to Funnel, but ??
I was afraid that the Funnel would suck in Dust, Garbage, etc., but I am not worried because of the inner and outer double Net and the Sponge-like Filter. 。 The air is more beautiful than the previous Power FilterSpec. The best thing is that it is lighter than that, and it is a recommended point as a vibration countermeasure for 2-stroke carburetor. ?? View detail
Cost performanceOK
This Funnel seems to be an Original product of PMC? and less expensive than those of MikuniBrand and YOSHIMURABrand.
I bought a slightly longer 40mm for my Φ36 because it seemed to be well stocked. The shape is not too curl, simple and beautiful, and I have a good feeling about it.
TMR's Funnel has a rather fine and thin-walled Pitch at the mounting Screw, which gives the impression that it is a little Large strange to make, but there was no problem at all in using it, and I was highly satisfied with it.
Unlike KEIHIN's CR and FCR Carburetor Bodies, TMR's Funnel is available in various lengths for each caliber, so the lineup is diverse.
KEIHIN, which has only Small body and Large body, is more universal.
(Unless you own several Motorcycles, I don't think you need to worry about this.)
In addition, Mikuni's Funnel is difficult to buy because the Spec. is difficult to understand when purchasing, and as of now, there are so many items that are listed as missing in WeBig.
Some things have strong funnel curl, some have no curl at all, some have holes in the edges of the funnel, etc. There are other detailed Spec. besides YOSHIMURA's Dual stacks.
I think it's just the wide variety of products that are missing.
I am wondering how TMR determines the Funnel Spec. at the time of shipment. Is the optimal Size selected by the distributor for each car model?
Some have a very short funnel, some have a standard 50mm funnel, etc. This is also a confusing area to buy for hanging.
In this case, it would be more efficient to distribute without Funnel anymore.
View detail
There's a change in the second strike.
Used for YamahaPOCKE with AIRSALAluminum cylinder. I recently switched to TM24Carburetor, so I tested DSFunnel, which I have been interested in for a while.
Many people say that funnels are meaningless for 2-stroke engines, but if the velocity of the intake air is changed, some change in the filling efficiency of the air mixture taken into the crankcase can be felt, can't it? I think so.
When I actually tested it, it was clear that the rise of Torque in the low to mid RPM range improved. On the other hand, there is almost no change in the high RPM range. In general, I think Merit is the best choice for Main for city driving.
After that, the bridge section of the Adapter was modified to look like an airfoil section and the inside of the 2nd funnel was BuffingPolished to improve intake efficiency.
View detail
Expensive, but I'm satisfied.
I am looking forward to the compatibility with SPEC-A in Yamamotracking without a doubt. View detail
Recommended!
Intake sound was improved and acceleration was increased!
It's expensive but … recommended!
View detail
Funnel
YOSHIMURA's Parts that also serves as a bonsai View detail
Beauty and smooth, high quality!
[How is it used?
When we purchased VM22carburetor, the intake side was a delicate 40mm in size, so we could not handle it with what we had on hand, so we purchased this relatively inexpensive Funnel.
Was the one you received as per Image?
It came in a simple Vinyl bag, but the quality was high, Beauty and smooth. The joints are also Exactly and feel good.
Was the installation difficult?
Easy installation by simply tightening with Screw.
How was your experience with it?
Functionality is not a problem. The funnel is a little long, so it seems to be able to cover some of the rain,
[Included Parts:were they on?
None in particular, but Screw is included.
[Was there anything that disappointed you?
Nothing in particular, and
Net can be used to prevent contamination with worms and large pieces of garbage.
View detail
Ideal for pc20.
Colored and installed.
If it breaks, I can buy it again at a price I can afford.
I do not expect it to be durable.
View detail
Not bad looking.
It's a little pricey, but it's cool and not cheap. View detail
As expected of YOSHIMURA, accuracy is good.
The price is good, but the performance and build quality is good.Normal is fine, but I changed my mind and went with OrangeAnodized. It looks beautiful.
The effect seems to start at lower speeds than with Funnel alone.
And the suction sound is now audible to Direct.
I think the item is worth the Gold amount.
View detail
if you have a budget...
if you have a budget, it's not cheap... If you have the budget to buy it, it is the most suitable with MWR air filter The effect is better than the original velocity stacks, but I don't have an answer to how much the effect is... After all, the MWR air filter effect is really high!! View detail
Worth a try
Purchased MWR High-Performance Velocity Stacks because I use MWR air filters The air filtration of MWR is very good I haven't installed velocity stacks yet, I'll report back when I use it View detail
Trickstar
About quality and texture= Good quality About the feeling of use= Waiting to install Products to buy together= Power intake Difficulty of installation=Easy to install View detail
Prevents foreign object intrusion
The possibility of insects or foreign objects entering the car is very low because it is stored with the Air-conditioner indoors, with the Seat hung. However, since it is a parallel 4-cylinder engine, when the Engine is stopped, any of the cylinders Inhalation in progress. So there is one in which the intake Valve of the "A" is open, and there is one in which there is a straight line from the Funnel to the combustion chamber.
I want as little water vapor in the combustion chamber as possible! That is why we installed this Vinyl lid.
View detail
CR Velocity Stacks
Awesome quality and super fast shipping. WeBike always has the best products. These stacks are first class and the pricing was perfect. View detail
YOSHIMURA Dual Stack Funnel System Set For TM-MJN
Dual stack is double the power, bike feels a lot faster, sound has changed and 2 numbers bigger jet. It worths the money and it looks good I wish there was all the colors available.. View detail
32→to 35.
The outer diameter of the air cleaner side of the eternal standard PC20carburetor is 32mm, halfway to Elbowョ. OEMAir cleaners are often 35mm, and if you tighten it with a band, it won't be stuck, but … it's easy to imagine the unwanted load! I can easily imagine the unnecessary load. Use this Adapter to fill the 3mm gap.
What's good about this Adapter is … I'm just hooked. It is. It's just stuck, that's why it turns. The air cleaner supports it, so you don't have to hit it in the wrong place and make the oil level go out of whack. Secondary air? I don't know anything about that.
This is a recommendation for those selfish people who don't care about the details, but are concerned about the settings. It's really nice.
View detail
Style and performance are both good
After purchasing it here, it was anodized by Kouken and is now unique.
YOSHIMURABrand is still good. The texture, the detailing, and the fit are all excellent.
If only it were a little cheaper now...
I guess it's as much as I can say. ((laughs)) )
View detail
Show quality
Superb craftsmanship, very high qualty part, wish they would be able to be seen when installed on bike. Total work of art View detail
Compared to standard Funnel
Setting is easier to produce than the standard Funnel of YD24carburetor. The quality and performance are good, so the price is acceptable. View detail